Technical Specifications
Issue Possible reason Solution
After turned
on, without
any display
The power cord Doesn’t
connect or socket
without electricity
Connected power plug, ensure
normal voltage electrical outlet
TV with images
without Voice
Audio cable is not
connected Re-connect the Audio cable
TV Box in MUTE state Please press mute button to restore
volume
Audio setting is abnormal
Please enter the audio and video
Settings menu, select the
appropriate sound channel and
language
Volume is too low Turn up the volume
Fail to connect
the network
Cable connect is abnormal Please reconnect internet
Wi-Fi closed or the signal
is too weak
Please restart the Wi-Fi or adjust the
position of this machine
Controller failure
Remote control is not
in the correct direction
Please aim at the front panel's '
SENSOR', then try again
Remote control is with
low battery Please change the batteries
Remote control is broken Please send it tothe local
maintenance station for checking
FCC STATEMENT：
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not expressly approved by the party responsi-
ble for compliance could void the user's authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
8
Android TV BoxAndroid TV Box
9
