Master Battery MasterPower Beta Series User manual

PV Grid Tie Inverter
Installation and Operation Manual
Beta Three Phase Inverter
Master Battery, S.L.
For model Beta-40K, Beta-50K, Beta-50K-HV,
Beta-60K-HV, Beta-70K-HV
Master Batery, S.L.
C/ Dehesa Vieja, 2
28052 Madrid, Spain
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web: www.masterbattery.es

Master Battery
Master Battery, S.L.
Master Battery´s equipment has supplied.
Master Battery, S.L.

Beta three phase series PV inverters convert direct current (DC) power from the photovoltaic (P
V) array into alternating current (AC) power to satisfy local loads as well as feed the power grid.
There are 5 models for Beta three phase inverter:
Beta-40K Beta-50K Beta-50K-HV Beta-60K-HV Beta-70K-HV

Master Battery recommends 2 ground protection methods: Through the grid terminal connection
and the external heat sink connection.
If the AC terminal is used to connect the ground please refer to the contents of 5.3.3.
If the heat sink is used to connect the ground please follow the steps below:
No matter what kind of grounding connection is adopted, it is strictly forbidden to
connect the ground of the inverter with the lightning protection of the building,
otherwise Master Battery will not be responsible for any damage caused by lightning.

Beta

Beta
Beta-40K
Master Battery recommends installing
Beta-50K
Beta-50K-HV
Beta-60K-HV
Beta-70K-HV
Beta