Master Bilt FIP-40 SERIES User manual

ITEM NO. ______________________________________________________
PROJECT ______________________________________________________
LOCATION _____________________________________________________
DATE _________________________ QTY. ___________________________
908 Highway 15 North • New Albany, MS 38652
PHONE: [phone] or 662-534-9061 • FAX: [phone] or 662-534-6049 • www.master-bilt.com
FEATURES
• Equipped with leveling legs to
correct for unlevel ooring
situations
• Stainless steel top serving deck
• Extra large, non-fogging front
display window
• Four panes of tempered glass on
front
• Backlit sign in stainless steel frame
• Two adjustable heavy-duty, white
epoxy-coated, welded wire shelves
• Full length uorescent lamp
• Automatic condensate evaporator
• Independent on/off light switch
• 2" foamed-in-place “zero ODP”
urethane insulation
DOORS
• Replaceable magnetic door gasket
• Foamed-in-place reversible rear door
• Self-closing
REFRIGERATION
• Self-contained, hermetic
condensing unit
• Rear air intake and discharge
• Automatic defrost
• Refrigerant: R-404A
• No minimum clearance required on
cabinet sides but front, back and top
must be left open for customer and
operator access
• Temperature range:
0° to -20°F (-18° to -29°C)
• R-factor (insulation efciency
rating): 17.24
WARRANTY
• Standard limited three year extend-
ed compressor and two year limited
parts and labor
FEATURES
FIP-40
FIP-40 SERIES
Ice Cream And Novelty
Display Merchandiser
OPTIONS
❑ Custom colors
❑ Extra shelf
❑ Casters
MODEL
❑ FIP-40
Refrigeration
system features
low maintenance
bare tube
condenser coil.
CONSTRUCTION
• Standard electronic controller with
these features:
– Ability to monitor defrost functions
from the front panel interface
– Audible alarm
– Eliminates room thermostat,
defrost termination/fan delay
control, defrost timer and digital
thermometer or other temperature
indicator
• 24 gauge steel interior and exterior
Standard
white
Black also
available
NEW
STANDARD TEXTURED FINISH

NOTE: Cabinet designed for optimum performance in air-conditioned area at 75°F ambient and 55% relative humidity.
All specications subject to change without notice.
908 Highway 15 North • New Albany, MS 38652
PHONE: [phone] or 662-534-9061 • FAX: [phone] or 662-534-6049 • www.master-bilt.com
FIP-40 SERIES
ICE CREAM AND NOVELTY DISPLAY MERCHANDISER
TECHNICAL SPECIFICATIONS
LISTINGS
HOOKUP
BID SPECIFICATIONS
Item no. FIP-40
Provide_______________( )
Low Temp Ice Cream and Novelty Display
Merchandiser(s), Master-Bilt model no. FIP-40.
Merchandiser to be provided with an elec-
tronically controlled monitoring system.
Construction features include textured
nish on interior and exterior, stainless steel
top serving deck, extra large non-fogging
front display window, four panes of tem-
pered front glass, backlit sign in stainless
steel frame, adjustable heavy-duty, white
1227-3/11-web
©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.
Via plug in, 9 foot long, exible 3
wire 14/3 cord with molded plug.
Twenty amp service is required.
PLAN VIEW
epoxy-coated welded wire shelves, and a
full length uorescent lamp. Standard lev-
eling legs provided to correct for unlevel
ooring situations.
Merchandiser to also have automatic
condensate evaporator and independent
on/off light switch. Cabinet to be foamed-
in-place with “zero ODP” urethane in-
sulation and to have a sparkling white
polyester enamel interior and exterior.
The doors are to be self-closing and have
magnetic door gaskets. Rear doors are to be
foamed-in-place.
The refrigeration system is to have a self-
contained, hermetic condensing unit using
R-404A refrigerant. Refrigeration system will
also contain a low maintenance bare tube
condenser coil. The temperature range is to
be 0° to -20°F (-18° to -29°C).
Merchandiser to have standard limited
three year extended compressor warranty
and two year limited parts and labor war-
ranty. Merchandiser to be UL, C-UL and UL
EPH listed.
NEMA 5-20P
NON-REMOVABLE LENS DIMENSIONS
SIDE VIEW ELEVATION VIEW
MODEL
DIMENSIONS
(in.)
DIMENSIONS
(mm)
VOLTS AMPS
UNIT
H.P.
NO. OF
SHELVES
STANDARD
SHELF
SIZE
(in inches)
DISPLAY
AREA
SQ. FT.
CAP.
CU. FT.
SHIP
CU. FT.
SHIP
WT.
(LB/KG)L D H L D H
FIP-40 40 31 503/16 1016 787 1270 115 13.6 3/4 2 19 x 351/47.5 11.8 46.4 427/194