Master Bilt Gelato Merchandise GEL Series User manual

ITEM NO. ______________________________________________________
PROJECT ______________________________________________________
LOCATION _____________________________________________________
DATE _________________________ QTY. ___________________________
908 Highway 15 North • New Albany, MS 38652
PHONE: [phone] or 662-534-9061 • FAX: [phone] or 662-534-6049 • www.master-bilt.com
CONSTRUCTION
• Manufactured in the USA for faster
service and parts and no dollar
uctuation
• Ideal for displaying gelato, ice
cream, sorbet or Italian ice
• Concealed evaporator coils protect
from spills
• GEL merchandisers ship assembled
• Designed to hold European ve liter
pans or can be congured for USA
standard 1/3 size or three gallon
tubs. Pans are optional on all
GEL models.
• Allows two levels of pans: one for dis-
play and one underneath for storage
• Electric condensate evaporator pan
(requires a dedicated 15 amp,
120 volt circuit)
• Standard power cord
• Rear air intake and front air discharge
• T8 electronic lighting
LIDS
• Front glass lid is top hinged for
easy cleaning and access to cabinet
interior
• Sliding rear lids on back
REFRIGERATION SYSTEM
• Semi-hermetic compressor(s) standard
• Hot gas defrost
• GEL-6 refrigeration system contains
one condensing unit, GEL-9 and
GEL-12 contain two
• Cabinet should not be placed
against a wall that closes off its front
or rear
• Refrigerant: R-404A
• Temperature range: -5°F to 20°F
(-21°C to -7°C)
• 2" thick walls with polyurethane
insulation in the refrigeration compart-
ment for dependable performance
FINISH
• Standard black nish with stainless
steel front panel
WARRANTY
• Standard limited three year extended
compressor and two year limited parts
and labor
FEATURES
GEL-12
GEL SERIES
Gelato Merchandisers
OPTIONS
❑ Casters
❑ Pans
❑ Dipper well
❑ Custom exterior colors (contact
factory for pricing and availability)
❑ Laminates (contact factory for
pricing and availability)
MODELS
❑ GEL-6
❑ GEL-9
❑ GEL-12
STANDARD
ELECTRONIC CONTROL
• Allows user to easily monitor
and adjust defrost functions
from the panel interface on the
front of the merchandiser
• Audible alarm
• Decreases service time and calls
• Eliminates room thermostat,
defrost termination/fan delay
control, defrost timer and
digital thermometer or other
temperature indicator

NOTE: Cabinet designed for optimum performance in air-conditioned area at 75°F ambient and 55% relative humidity.
All specications subject to change without notice.
908 Highway 15 North • New Albany, MS 38652
PHONE: [phone] or 662-534-9061 • FAX: [phone] or 662-534-6049 • www.master-bilt.com
GEL SERIES
GELATO MERCHANDISERS
TECHNICAL SPECIFICATIONS
LISTINGS
HOOKUP
BID SPECIFICATIONS
Item no. GEL-_______________
Provide____________( ) Gelato
Merchandiser(s), Master-Bilt model no.
GEL-_______________.
Merchandiser to be supplied assembled
with top hinged front glass lid and sliding
rear lids.
Merchandiser to have standard electronic
controller eliminating the need for a room
thermostat, defrost termination/fan delay
1267-6/10-web
©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.
Via plug in, 10 foot long exible four wire 208-230v
14/4 cord with neutral and ground wires and plug.
Electric condensate evaporator pan requires
a dedicated 15 amp, 120 volt circuit.
PLAN VIEW SIDE VIEW ELEVATION VIEW
control, defrost timer and digital thermometer
or other temperature indicator.
Other features will include electronic T8
interior lighting, standard power cord and
concealed evaporator coils to protect from
product spills.
The refrigeration system will contain one
condensing unit in GEL-6 models and two
units in GEL-9 and GEL-12. Condensing units
will feature semi-hermetic compressors. Hot
gas defrost will be standard. In addition, the
refrigeration compartment will contain 2"
thick walls with polyurethane insulation for
dependable performance. Temperature range
will be -5°F to 20°F (-21°C to -7°C).
Merchandiser to have standard limited
three year extended compressor warranty
and two year limited parts and labor
warranty. Merchandiser to be UL and C-UL
listed and UL EPH classied.
NEMA L14-20P
MODEL
DIMENSIONS
(in.)
DIMENSIONS
(mm)
VOLTS* AMPS**
UNIT
H.P.
CAP.
5 LITER
PANS†
DISPLAY
AREA
SQ. FT.
CAP.
CU. FT.
SHIP CU.
FT.
SHIP WT.
(LB/KG)L D H L D H
GEL-6 465/16 441/2533/81192 1130 1356 208-230 9.0 1 24 8.5 7.6 93.0 900/409
GEL-9 6515/16 441/2533/81675 1130 1356 208-230 13.1 *** 36 12.5 10.8 127.0 1100/500
GEL-12 851/2441/2533/82172 1130 1356 208-230 13.8 *** 48 16.4 14.2 161.0 1300/591
*Note: 208-230/60/1 also requires neutral and safety ground wire. **Electric condensate evaporator pan requires a
dedicated 15 amp, 120 volt circuit. ***Refrigeration system contains two 1 HP compressors. †Half of pans on top level, half on lower
storage layer.
NEMA 5-15P
(condensate
evaporator pan)