Master Grower Octopus X Series User manual

Octopus X Series 800W/400W LED Grow Lights
1Introduction
2Product Information & Specifications
Note: Other types of plug are also available, please check with our sales engineers directly.
This manual describes the installation and connection of the product and also describes how to
use the product. Mounting and installing of the Octopus X Series LEDs may only be executed by
certified service personnel. Please read and understand this manual completely before using the
product. Only use the product as specified in this manual.
2.1 General Information
Product Name Octopus X Series LED Grow Lights
Manufacturer
Version US EU UK AUS
Plug Type US plug 120-277V EU plug 230V UK plug 240V AUS/NZS plug 240V
Input Voltage 120-277VAC 100-230VAC 100-240VAC 100-240VAC
Shenzhen VANQ Technology Co., Ltd.
AUS/NZS
plug 240V
US 5-15P US 6-15P US L7-15P EU plug 230V UK plug 240V
!
Octopus 800X Octopus 400X
TM

2.2 Technical specifications
400W ±5%
100-277VAC
800W ±5%
100-277VAC
277-480VAC
OSRAM
OSRAM
0.2W ±5%
Octopus 800X Octopus 400X
Input Power
Input Voltage(Standard)
HighInput Voltage(Optional)
Supplier
Model
LED Diodes - White
LED Diodes
- Single Color
Actual Working
Power per LED Diode
Rated Max Power per
LED Diode
Model
Total LED Diodes Number
Rated Max Power of all LED
Diodes per LED Fixture
(NOT ACTUAL POWER OF LED FIXTURE)
Actual Working Power per
LED Fixture / Rated Max
Power of all LED Diodes per LED Fixture
Relative Radiation Intensity
PPF(Photosynthetic Photon Flux)
Efficacy (100%-50% power)
Indoor Vertical Farming
Recommended Growing Area
(Indoor Vertical Farming)
Recommended Hanging Height From Canopy
(Indoor Vertical Farming)
Indoor Grow Tent
Recommended Growing Area
(Indoor Grow Tent)
Recommended Hanging Height From Canopy
(Indoor Grow Tent)
LED Fixture Weight
Dimensions
Working Temperature
Dimming
IP Rating
Supplier
Rated Max Power per
LED Diode
Actual Working
Power per LED Diode
2048pcs
0.66W ±5%
(300mA x 2.6V)
0.66W ±5%
(300mA x 2.6V)
0.28W ±5% 0.28W ±5%
1408pcs
3456pcs
2608W ±5%
31%
1080 μmol/s2160 μmol/s
2.7-2.8 μmol/J 2.7-2.8 μmol/J
4ft x 4ft
1.2m x 1.2m
0.5-1.5ft
15cm-45cm
1ft-1.5ft
30cm-45cm
1ft-1.5ft
30cm-45cm
14.3 kg, 31.46 lbs
-20°C ~ 40°C | -4°F ~ 104°F
0-10V
IP43
5ft x 5ft
1.5m x 1.5m
3ft x 3ft
0.9m x 0.9m
30%
1305W ±5%
1728pcs
696pcs
0.82W ±5%
(250mA x 3.3V)
0.82W ±5%
(250mA x 3.3V)
0.2W ±5%
1032pcs
Power
Light Source Details
Spectrum
PAR (Photosynthetically Active Radiation)
Recommended Applications
Physical
Certificates
_
_
_
_
SMD2835
8.1 kg, 17.82 lbs
81cm L x 69.5cm W x 7.8cm D
31.89in L x 27.36in W x 3.07in D
SMD3030
BLUE RED
+
SANAN
SMD3030
BLUE RED
+
SANAN
112.8cm L x 110.8cm W x 7.8cm D
44.41in L x 43.62in W x 3.07in D
LED Diodes Qty per
LED Fixture
LED Diodes Qty per
LED Fixture
SMD2835
+ +

2.3 Compatible products and accessories
NOMINAL ELECTRICAL AC INPUT
Dimming cables
Light Hanger
Power cord
Controller
Product
T-shape daisy chain connection dimming cable, 2m/6.5ft
Product Name Part Number
MG-VD100
MG-PC-US515
MG-PC-US615
MG-PC-USL715
MG-PC-EU230
MG-PC-UK240
MG-PC-AU240
MG-DCC-T01
MG-RH-01
MG-WR-01
0-10V dimming controller
Power cord with US plug 5-15P, 1.5m/5ft
Power cord with US plug 6-15P, 1.5m/5ft
Power cord with US plug L7-15P, 1.5m/5ft
Power cord with EU plug 230V, 1.5m/5ft
Power cord with UK plug 240V, 1.5m/5ft
Power cord with AUS/NZS plug 240V, 1.5m/5ft
1/8" Adjustable Ratchet Hangers 1.8m/6ft (Set of 2 - Holds
150 lbs/100Kg)
Steel Wire Rope Hanger 30cm/1ft (Set of 4 - Holds
150 lbs/100Kg)
Octopus 800X
* Octopus 400X is only available with 100-277VAC version.
AC Voltage 120V 208V 230V 277V 347V 380V 400V 480V
6.7A 3.85A 3.48A 2.89A 2.31A 2.11A 2.01A 1.67A
804W 802W 801W 798W 800W 803W 803W 801W
0.98 0.98 0.98 0.98 0.98 0.98 0.97 0.97
AC Current
AC Power
Power Factor
ORDERING CODE MATRIX FOR LIGHT FIXTURE
FAMILY MODEL INPUT VOLTAGE PLUG TYPE
Octopus 800X 800W S
H
100-277VAC
277-480VAC
NEMA 5-15P
NEMA 6-15P
NEMA L7-15P
EU 230V
UK 240V
AUS/NZS 240V
Pigtail
400X 400W
US5
US6
USL7
EU
UK
AUS
P
* H is only available with
pigtail power cord.

The product is intended to be used in indoor growing environments. The product can be used in
wet environments.
The product may not be used outdoors. The Octopus Series LEDs light functions optimal when the
max ambient temperature is between 20~40°C.
2.4 Environment
2.5 Legal
CE LVD approval according to: EN 60598-2-1&EN 62471&EN 62493&EN 62778
CE EMC approval according to: EN 55015&EN 61547&EN 61000-3-2/-3
FCC
3Packing List
Please follow the content of the list and carefully check whether the purchased equipment and
accessories are complete. If you find that the actual product does not match the list, or the product
is damaged, please contact us immediately and provide photos or videos!
1.LED Fixture X 1
2.1/8" Adjustable
Ratchet Hangers X 2
4.Power Cord X 1 5.Dimming Cabie
(optional) X 1
6.VD-100 Controller
(optional, buy
separately) X 1
OFF
Just for
0-10V 100%
30% 60% 90%
20% 50% 80%
10% 40% 70%
VQ-VD100
Power Output Controller
888 %
3.Steel Wire
Rope Hanger X 2

4Safety Precautions & Warnings
Warning!
Carefully read the warnings below before using or working with the product!
5Installation
Warning!
Always adhere to the local rules and regulations when installing or using the LED light.
No.
1
2
3
4
5
6
2
1
2
1
1
Product Name Model Quantity
1.8m/6ft
1.5m
30cm/1ft
T-Shape
0-10V Dimming
Power Cord
Steel Wire Rope Hanger
1/8" Adjustable Ratchet Hangers
Octopus 800X/400X 800W/400W 1
Dimming Cable(optional)
VD100 Controller(optional, buy separately)
!
DO NOT connect to live power until installation is complete.
!
Do not open or disassemble the LED light. Opening or modifying the LED light can be dangerous
and will void the warranty.
Do not use the LED light when either the LED light or its power cord are damaged. Replace the
power cord only with original certified cords.
!
!
Modifications to the cords can lead to unwanted electromagnetic effects, which makes the product
not comply with legal requirements.
!
Do not expose the LED light to:
- (ambient) temperatures outside the specified range;
- dust and contamination;
- direct sunlight during use or HID light that could heat up the ballast.
!
Always disconnect the LED light from mains before performing any maintenance.
!
Always allow for a cool down period of at least 30 minutes before touching the LED bars. Touching
the LED bars when the light is lit or immediately afterwards can result in severe burns!
!
Do not use the LED light near flammable, explosive or reactive substances. Do not use sulfur
vaporizers or water misters.
!
The installation and use of the LED light is the responsibility of the end user. Incorrect use or
installation can lead to failure and damage to the LED light. Damage to the LED light and
electronic circuitry as a result of incorrect installation and use revokes the warranty.
!
!Mounting and installing of the LED light may only be executed by certified service personnel, in
accordance with the applicable local laws and regulations.
*All the LED fixtures in this series can be installed according to the same instructions.
!The installer is responsible for correct and safe installation.
!Ensure the local cabling can support the voltage and current requirements of the LED light.
!Avoid coiled cords and keep mains leads separated. This prevents electromagnetic interference.
!Do not connect or disconnect the LED light under load.
!Mount the system to something that can hold the weight of the LED light.

The suggested height from the plant canopy to the LED light is:
During vegetative stage, 1ft - 1.5ft/30cm - 45cm
During flowering stage, 0.6ft - 1ft/15cm - 30cm
Below is the PPFD map of 5ft x 5ft/1.5m x 1.5m at 3 different hanging heights.
5.2 Mounting the LED driver onto the light fixture
5.1 Assemble the LED bars with the holding fixture
5.3 Hanging the light fixture

Octopus 400X Octopus 800X
Hanging Height: 6" (15cm)
4ft/1.2m
4ft/1.2m
5ft/1.5m
5ft/1.5m
Average PPFD of 5ft x 5ft footprint: 884 µmol/m²/s
Average PPFD of 4ft x 4ft footprint: 754 µmol/m²/s
Average PPFD of 4ft x 4ft footprint: 611 µmol/m²/s
Average PPFD of 4ft x 4ft footprint: 590 µmol/m²/s
Average PPFD of 4ft x 4ft footprint: 1195 µmol/m²/s
114 260 328 351 373 365 349 326 311 164
322 846 1123 1156 1248 1221 1145 884 356
370 978 1206 1266 1343 1338 1258 1205 975 404
382 988 1214 1270 1370 1366 1286 1201 968 416
388 982 1275 1308 1428 1401 1230 966 402
410 1004 1271 1338 1424 1397 1347 1288 985 396
360 992 1236 1313 1432 1413 1238 987 370
346 985 1275 1310 1333 1341 1234 978 388
254 815 1126 1168 1280 1243 1203 1101 878 296
138 332 349 357 371 374 345 334 318 146
1068
1337
1326
1424
Hanging Height: 12" (30cm)
4ft/1.2m
4ft/1.2m
5ft/1.5m
5ft/1.5m
Average PPFD of 5ft x 5ft footprint: 817 µmol/m²/s
Average PPFD of 4ft x 4ft footprint: 1002 µmol/m²/s
244 377 405 447 535 573 532 484 448 256
396 599 700 834 913 920 887 647 426
538 803 958 1078 1132 1159 1104 961 819 550
572 859 1025 1153 1221 1233 1176 1036 874 582
628 878 1050 1206 1278 1277 1090 898 638
616 896 1078 1173 1282 1281 1217 1083 917 654
590 887 1034 1188 1269 1274 1206 1055 900 616
554 829 979 1132 1186 1188 986 819 566
440 625 785 891 914 881 797 649 438
280 434 472 487 520 552 513 477 455 294
769
1211
1145
885
Hanging Height: 18" (45cm)
Average PPFD of 5ft x 5ft footprint: 724 µmol/m²/s
Average PPFD of 4ft x 4ft footprint: 834 µmol/m²/s
346 425 465 517 523 516 510 484 443 340
470 520 592 730 737 754 723 516 508
576 662 764 905 955 946 911 781 670 602
652 724 850 998 1052 1059 997 847 727 656
680 761 875 1032 1090 1090 883 754 710
702 757 857 1020 1068 1087 1025 871 779 694
658 716 846 997 1058 1067 1007 866 768 700
580 657 773 897 962 975 800 689 630
492 563 622 742 760 739 652 562 512
352 441 453 515 523 509 493 464 438 384
610
1032
915
790
4ft/1.2m
4ft/1.2m
5ft/1.5m
5ft/1.5m
Hanging Height: 12" (30cm)
4ft/1.2m
4ft/1.2m
302 381 463 521 540 471 399 318
350 818 909 1055 1059 911 794 356
373 951 1027 1179 1175 1019 937 371
559 939 1114 1215 1223 1103 935 573
554 932 1120 1222 1212 1112 940 545
381 963 1013 1170 1154 882 976 391
355 829 889 1022 1052 874 818 369
288 363 432 515 511 415 368 294
Hanging Height: 18" (45cm)
4ft/1.2m
4ft/1.2m
297 391 413 482 494 402 399 308
386 526 553 752 761 542 507 371
456 743 742 816 826 751 767 463
545 787 875 1024 1022 888 793 560
556 783 877 1021 1030 875 777 545
443 728 734 805 801 756 720 455
394 542 545 746 738 554 531 397
285 385 416 468 488 411 375 294
Hanging Height: 24" (60cm)
4ft/1.2m
4ft/1.2m
362 406 429 468 458 429 393 360
441 554 640 708 731 645 550 456
537 633 673 789 793 674 645 532
529 702 796 842 835 741 718 537
525 696 786 839 822 792 703 528
532 626 660 783 785 671 619 533
436 543 629 714 722 634 549 442
342 400 428 449 445 420 398 347

6Connecting LED Light To A Controller
5.3 Connecting the LED light to the mains
Warning!
!Make sure mains power is switched off.
Warning!
!Do not connect or disconnect the controller with LED light under load.
!Ensure the power cord and the controller cables do not touch any of the LED bars.
Using a daisy chain setup, a maximum of 50pcs LED lights can be connected to one controller.
The controller can dim the LED light from 0 to 100%.
• Connect the dimming cable to the dimming port on the first LED light.
• Use dimming cable (T-shape) to connect the dimming port of the following LED light.
• Repeat these steps to connect up to 50pcs LED lights.
!Ensure the cord is not coiled and does not touch any hot surfaces.
!Connect the cables according to local rules, safety regulations and electrical code.
!Ensure external switching gear can cope with the inrush current of the LED fixture. Always use a
double pole contactor suitable for switching a capacitive load. Never use household timers to
switch the LED fixture!
VD-100 0-10V
Dimming Controller
OFF
Just for
0-10V 100%
30%
60%
90%
20%
50%
80%
10%
40%
70%
VQ-VD100
Power Output Controller
888 %

8Storage and disposal
Inspection, maintenance and repair
!PLEASE NOTE: greater than 15% of the diodes must be non-functional before
the unit can be considered defective.
!Caution! Do not clean the LED fixture with detergents, abrasives or other aggressive substances.
9Warranty service
• Store the LED fixture in a dry and clean environment, with an ambient temperature of-20~85° C.
VANQ technology warrants the mechanical and electronic components of their product to be free
of defects in material and workmanship if used under normal operating conditions for a period of
three(3) years from the original date of purchase. If the product shows any defects within this
period and that defect is not due to user error or improper use, VANQ technology shall, at its
discretion, either replace or repair the product using suitable new or reconditioned products or
parts. In case VANQ technology decides to replace the entire product, this limited warranty shall
apply to the replacement product for the remaining initial warranty period, i.e. three(3) years from
the date of purchase of the original product. For service, return the LED light to your shop with the
original sales receipt.
• The product must not be discarded as unsorted municipal waste, but must be collected
separately for the purpose of treatment, recovery and environmentally sound disposal.
• Regularly check the LED fixture for dust or dirt buildup. Clean if necessary. Contamination may
cause overheating and decreased performance. Clean the outside of the LED fixture using a dry
or damp cloth.
• Regularly check the cables of the LED fixture to ensure it is undamaged.
Manual: Octopus 800X/400X LED
Grow Lights Manual
Changes reserved - Version 01/21
T. + 86 755 2904 2099
F. + 86 755 2904 2092
E. [email protected]
W. www.MasterGrowerLED.com
Shenzhen VANQ Technology Co., Ltd.
3#, BLDG B, Debaoli lndustrial park, NO.312, Jihua Road
Bantian, Longgang, Shenzhen, Guangdong China
Manufacturer
7