Master PRO Series User manual

Geng Set Up
Make sure that you securely connect one end of an air hose to the air inlet of the airbrush and the other end of the
hose to a compressor. Remember to always wear a dust mask or respirator for solvent based paint, while airbrushing.
Holding and Triggering a Dual-Acon Airbrush
Hold the airbrush like you would hold a pen with your index nger on the trigger for control. For a dual-acon airbrush
press down on the trigger for air ow and while the trigger is pushed down pull back on it to release paint ow.
Fundamental Airbrushing Techniques for Best Results
When using your airbrush, spraying distance, applicaon speed, airbrush angle and air pressure are the key principles
to consistently achieving the best airbrush spraying results. To get comfortable using the airbrush, pracce spraying
with it at dierent distances and spray angles, while also adjusng your speed of applicaon and air pressure.
(For airbrushing pracce exercises and detailed step by step airbrush ps, tricks and video guides visit
www.airbrushresourcecenter.com)
Special Features Available on Some Models of Master and Master Pro Airbrushes
A. Quick Flush Cutaway Handle
The cutaway handle allows you to pull the needle chucking nut
back to quickly ush and clean uid passages within the airbrush.
B. Preset Knob Handle
The handles preset uid control knob allows you to set the
limit on the travel distance of the airbrush trigger. This enables
complete control of paint ow, so you can spray consistent
repeatable lines.
C. Micro Airow Adjustment Control Valve
A specialized air control valve at the head of the airbrush that can
be adjusted to lower the air ow (psi), which enables accurate
micro ne spray control.
AIRBRUSH QUICK START GUIDE
For further specic detailed instrucon and informaon for each model of Master and Master Pro Airbrushes,
please go to www.airbrushresourcecenter.com
Dual-acon airbrushes are the most widely used style of airbrush,
as they allow the user to have superior control of the air ow, uid
ow and spray paern. The three main dual-acon airbrush types
are Gravity Feed, Siphon Feed and Side Feed.
DUAL-ACTION refers to the triggering method of acvang the
airbrush, as pressing down on the trigger releases the air ow and
drawing back on the trigger releases the paint ow. Since a dual-
acon airbrush combines the two separate moons of the trigger
into a single control, it makes it much easier for the user to achieve
consistent ne detail line spraying results.
A.
B.
C.
PUSH DOWN
FOR AIR
PULL BACK FOR FLUID
PULL BACK
Dual-Acon
Siphon Feed
AIR
AIR
FLUID
FLUID
Air source
Air source
Dual-Acon
Gravity Feed
Dual-Acon
Side Feed

For addional in-depth airbrush instrucons and support informaon for each Model of Master and Master Pro Airbrush,
visit www.airbrushresourcecenter.com
For quick personalized soluons provided by our trained professionals, call: [phone]
Cleaning the Airbrush
Before cleaning the airbrush always empty the excess paint rst, and always clean the airbrush between color changes
and at the end of each painng session. Adding a new color to the airbrush without cleaning it will lead to color
contaminaon from the previous color. To prevent the airbrush from geng clogged, never allow paint to dry inside of
the airbrush. Rell the airbrush cup or bole using the appropriate cleaning soluon for the type of paint medium that
was used in the airbrush. Warm water works for most water-based mediums. Flush out the airbrush by back ushing
(plugging the p of the brush while pulling the trigger back) and spray out unl airbrush sprays clear.
• How to airbrush guides, eBooklets and videos
• Step by step airbrush ps, tricks and videos
• Product informaon and usage manuals
• Exploded view diagrams of each airbrush model
• Replacement parts, repairs kits and accessories
• Airbrush maintenance and cleaning
• Airbrush disassembly and reassembly
• Troubleshoong procedures
• Warranty informaon
• FAQ - frequently asked quesons
Pistol Trigger Airbrush Single-Acon Airbrush Single-Acon External Mix Airbrush
Pistol trigger airbrushes give you the feel
of a spray gun trigger, while providing
you with the accurate spray control of
an airbrush. Some of our pistol trigger
airbrushes have a xed dual-acon
feature where pulling slightly back on
the trigger releases the air ow only,
then a further pull back of the trigger
releases the paint ow.
Single-acon airbrushes are easy to
operate, as a simple push down on
the trigger acvates both the air ow
and paint ow. This one step triggering
makes single-acon airbrushes ideal for
beginners, although they do not provide
as much spray control as dual-acon
airbrushes.
An external mix airbrush is called that
because the air and paint mix in front
of the needle. How much paint spray
comes out is controlled through a knob
located near the p of the airbrush. A
single-acon only requires a simple push
down on the trigger to acvate both the
air ow and paint ow.
Airbrush Resource Center is the Go-To Source for
Everything You Need to Know About Airbrushing!
www.airbrushresourcecenter.com
For more informaon about Master or Master Pro Series Airbrushes, visit www.usartsupply.com or www.tcpglobal.com
PUSH DOWN
PULL BACK
PUSH DOWN
Master Airbrush oers a complete professional line of
value priced precision airbrushes that provide exceponal
atomizaon and accurate spray control. Master Airbrush has
mulple levels of airbrushes to t all levels of users, all types
of spray applicaons and all forms of spray media.
Master Pro is a new series of superior quality airbrushes that
provide the user with an elite level of spraying performance!
Durable nely tuned airbrushes, built with the highest
quality materials, and designed to be used by those that
desire the perfect results every me!
WARNING: Cancer or reproducve harm. www.P65Warnings.ca.gov