MasterCraft 054-3187-0 User manual

20V max* LITHIUM-ION
CORDLESS LED WORK LIGHT
IMPORTANT:
Read and understand this instruction manual
thoroughly before using the product.
INSTRUCTION
MANUAL
054-3187-0

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
3
TABLE OF CONTENTS
Technical Specifications 4
Safety Guidelines 5
Key Parts Diagram 13
Operating Instructions 15
Maintenance 17
Troubleshooting 18
Parts List 19
Warranty 20
NOTE:
If any parts are missing or damaged, or if you have
any questions, please call our toll-free helpline at
1-800-689-9928.
SAVE THESE INSTRUCTIONS
• This manual contains important safety and operating
instructions. Read all instructions and follow them with use
of this product.
TABLE OF CONTENTS

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 054-3187-0 | contact us 1-800-689-9928
4
TECHNICAL SPECIFICATIONS
Head Pivot 0-115°
Numbers of Led 20 pcs
Illumination at 1M >300 lux
Run Time 37 hours (using 4.0Ah
battery)
Tool Weight (without battery) 6 oz (0.17 kg)
Battery Type Lithium-ion
Battery Voltage 20V max* d.c.
Charger Input 120V, 60 Hz AC only
Optimum Charging Temperature 5–40°C (41–104°F)
Light Output 97 lumens with 4.0Ah
battery
*Maximum battery voltage without workload; with workload
nominal voltage is 18V.
Recommend using tool with Mastercraft® 20V max* Lithium-
Ion 4.0 Ah battery (054-7557-6; sold separately) for optimal
performance.
TECHNICAL SPECIFICATIONS

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
5
SAFETY GUIDELINES:
WARNING!
Safety symbols in this Instruction Manual are used to
flag possible dangers. The safety symbols and their
explanations require your full understanding. The
safety warnings do not, by themselves, eliminate any
danger, nor are they substitutes for proper accident
prevention measures.
WARNING!
This Safety Alert Symbol indicates caution, warning,
or danger. Failure to obey a safety warning can result
in serious injury to yourself or others. To reduce the
risk of injury, fire, or electric shock, always follow
the safety precautions.
KNOW YOUR TOOL
To operate this tool, carefully read this Instruction Manual and
all labels affixed to the Cordless LED Work Light before using.
Keep this manual available for future reference.
IMPORTANT
This tool should only be serviced by a qualified service
technician. For more information, call the toll-free helpline at
1-800-689-9928.
READ ALL INSTRUCTIONS THOROUGHLY
SAFETY GUIDELINES

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
6
model no. 054-3187-0 | contact us 1-800-689-9928
SAVE THESE INSTRUCTIONS
GENERAL POWER TOOL SAFETY WARNINGS
WARNING!
Read all safety warnings and instructions. Failure to
follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
• Keep the work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks, which may ignite the
dust or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce the risk of electric shock.
SAFETY GUIDELINES

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
7
• Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep the cord
away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground-fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the risk
of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use the tool
while tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating power
tools may result in serious personal injury.
SAFETY GUIDELINES

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
8
model no. 054-3187-0 | contact us 1-800-689-9928
• Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection, used for
appropriate conditions, will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to power source and/or
battery pack, picking up or carrying the tool. Carrying power
tools with your finger on the switch or energising power tools
that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
• If devices are provided for the connection of dust
extraction and collection facilities, ensure that these are
connected and properly used. Use of these devices can
reduce dust-related hazards.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power tool for
your application. The correct power tool will do the job better
and more safely at the rate for which it was designed.
SAFETY GUIDELINES

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
9
• Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
• Use the power tool, accessories, tool bits, etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
SAFETY GUIDELINES

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
10
model no. 054-3187-0 | contact us 1-800-689-9928
BATTERY TOOL USE AND CARE
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
• Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
• When battery pack is not in use, keep it away from other
metal objects like paper clips, coins, keys, nails, screws
or other small metal objects that can make a connection
from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, also
seek medical help. Liquid ejected from the battery may
cause irritation or burns.
SERVICE
• Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
SAFETY GUIDELINES FOR CORDLESS LED WORK LIGHT
WARNING!
When using electric appliances, basic precautions
should always be followed, including the following:
SAFETY GUIDELINES

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
11
• Read all the instructions before using the appliance.
• To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
• Do not contact moving parts.
• Only use attachments recommended or sold by the
manufacturer.
• Do not use outdoors.
• To reduce the risk of electrical shock, do not put work
light and battery pack in water or other liquid. Do not
place or store appliance where it can fall or be pulled into
a tub or sink.
• Use only the recommended battery packs and charger
listed below. Any attempt to use another battery pack will
cause damage to the work light; it could possibly explode
or cause a fire or personal injury.
BATTERY PACK CHARGER
054-3124-0,
054-7553-4,
054-7557-6
054-2434-8
054-3126-6,
054-7559-2
• The label on your tool may include the following
symbols. The symbols and their definitions are as
follows:
V ..................... Volts
A ..................... Amperes
SAFETY GUIDELINES

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
12
model no. 054-3187-0 | contact us 1-800-689-9928
Hz ................... Hertz
W .................... Watts
min ................. Minutes
................. Alternating current
or d.c..... Direct current
n0 ................... No-load speed
............... Class II Construction
…/min ........... Revolutions or reciprocation per minute
............... Grounding terminal
BPM ............... Beats per minute
.............. WARNING – To reduce the risk of injury,
user must read instruction manual.
.............. WARNING – To reduce the risk of injury
always wear eye protection.
.............. WARNING – To reduce the risk of injury
always wear ear protection.
SAFETY GUIDELINES

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
13
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
PACKAGE CONTENTS:
Cordless LED Light and instruction manual.
KEY PARTS DIAGRAM
1
2
3
No. Description No. Description
1 LEDs 3 Work light Head
2 On/Off Button
WARNING!
• Remove the Cordless LED Work Light from the package
and examine it carefully. Do not discard the carton
or any packaging material until all parts have been
examined.
• If any part of the work light is missing or damaged, do
not attach the battery pack to the tool or use the tool
until the part has been repaired or replaced. Failure to
heed this warning could result in serious injury.
FPO
KEY PARTS DIAGRAM

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
14
model no. 054-3187-0 | contact us 1-800-689-9928
Before attempting to use this tool, become familiar with all of
its operating features and safety requirements.
For optimum performance and safety, read the following
operating instructions carefully before using.
WARNING!
• Do not allow familiarity with the Cordless LED Work
Light to cause a lack of alertness. A fraction of a
second of carelessness is enough to cause severe
injury.
FPO
KEY PARTS DIAGRAM

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
15
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
OPERATING INSTRUCTIONS
TO ATTACH THE BATTERY
PACK
(fig 1)
1. Align the raised platform
on the battery pack
with the grooves on the
bottom of the work light,
and then attach battery
pack to the work light as shown in fig 1.
2. Make sure that the latch on the battery pack snaps into
place and the battery pack is secured to the work light
before beginning operation.
TO DETACH THE BATTERY PACK
(fig 1)
1. Depress the battery-release buttons located on the front of
the battery pack to release the battery pack.
2. Pull the battery pack out and remove it from the tool.
fig 1
Attach
Latch Detach
NOTICE: When inserting the battery pack into the tool, make
sure that the raised platform on the pack aligns with the grooves
on the bottom of the tool and that the latches snap properly into
place. Improper assembly of the battery pack can cause damage
to internal components.
OPERATING INSTRUCTIONS

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
16
model no. 054-3187-0 | contact us 1-800-689-9928
TURN ON/OFF THE WORK
LIGHT
(fig 2)
Depress the on/off button to
turn on the work light; depress
the switch button again to turn
off the work light.
TO ADJUST THE WORK
LIGHT HEAD
(fig 3)
The work light head
independently pivots 115° for
maximum flexibility. Move the
head by manually adjusting it
to any position within the 115°
pivot range. Do not force the head beyond the 115° range.
fig 2
On/Off
button
fig 3 115°
OPERATING INSTRUCTIONS

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
17
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics
are susceptible to damage from various types of commercial
solvents and may be damaged by their use. Use clean cloths to
remove dirt, dust, oil, grease, etc.
WARNING!
• When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage. To ensure safety and reliability, all
repairs should be performed by a qualified service
technician.
• Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc. to come in
contact with plastic parts. Chemicals can damage,
weaken or destroy plastic.
FPO
MAINTENANCE

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 054-3187-0 | contact us 1-800-689-9928
18
TROUBLESHOOTING
Problem Possible causes Solutions
The work light
does not light
The battery is
depleted Charge the battery
If the problem remains unsolved after performing the checks
described above, call the toll-freehelpline at 1-800-689-9928.
TROUBLESHOOTING

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
19
EXPLODED VIEW
1
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
No. Part No. Description No. Part No. Description
1 3126251000 Upper Housing 10 3402385000 Contact Receptacle
Assembly
2 3126250000 Transparent
Guard 11 3126261000 Rubber Gasket
3 3705114000 Reflector 12 3126258000 Plate
4 4890822000 PCB Assembly 13 4890821000 PCB Assembly
5 5610012000 Tapping Screw 14 3660318000 Spring
6 3126252000 Lower Housing 15 3126253000 Switch Cover
7 3127173000 Right Base 16 3126260000 Pin
8 5690004000 O Ring 17 5610015000 Tapping Screw
9 3126259000 Pin 18 3127172000 Left Base
If any parts are missing or damaged, or if you have any
questions, please call the Toll-free Helpline, at 1-800-689-9928.
PARTS LIST

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 054-3187-0 | contact us 1-800-689-9928
20
This Mastercraft product is guaranteed for a period of 3 years
from the date of original retail purchase against defects in
workmanship and materials, except for the following components:
a) Component A: Batteries, chargers and carrying case, which
are guaranteed for a period of 2 years from the date of
original retail purchase against defects in workmanship and
materials;
b) Component B: Accessories, which are guaranteed for a
period of 1 year from the date of original retail purchase
against defects in workmanship and materials.
Subject to the conditions and limitations described below, this
product, if returned to us with proof of purchase within the
stated warranty period and if covered under this warranty, will be
repaired or replaced (with the same model, or one of equal value
or specification), at our option. We will bear the cost of any repair
or replacement and any costs of labour relating thereto.
These warranties are subject to the following conditions
and limitations:
a) a bill of sale verifying the purchase and purchase date must
be provided;
b) this warranty will not apply to any product or part thereof
which is worn or broken or which has become inoperative
due to abuse, misuse, accidental damage, neglect or lack of
proper installation, operation or maintenance (as outlined in
the applicable owner’s manual or operating instructions) or
which is being used for industrial, professional, commercial
or rental purposes;
WARRANTY
Table of contents
Popular Work Light manuals by other brands

Larson Electronics
Larson Electronics WAL-WBC-500LTL-LED-100 instruction manual

HIKOKI
HIKOKI UB 18DG Handling instructions

Flex
Flex CL 5000 10.8/18.0 Original operating instructions

Anslut
Anslut 016711 operating instructions

3B SCIENTIFIC PHYSICS
3B SCIENTIFIC PHYSICS U191501 instruction sheet

Xtricity
Xtricity 4-80004 instructions