MasterForce 243-1488 User manual

Drill Press Vise
243-1488
OPERATOR’S MANUAL
To Reduce The Risk Of Injury, User Must Read And
Understand Operator’s Manual. Save These Instructions For Future Reference.
CAUTION:
© 2015 Menard, Inc., Eau Claire, WI 54703 05/05/2015

Save this Manual.............................................................................
Safety Instructions............................................................................
Operation..........................................................................................
Steps to Mount a Vise.......................................................................
Parts List...........................................................................................
Maintenance.....................................................................................
Notes................................................................................................
Warranty...........................................................................................
Page 1
Page 1
Page 2
Page 2
Page 3
Page 3
Page 4
Page 5
TABLE OF CONTENTS
Page 5
SAVE YOUR RECEIPTS
THIS WARRANTY IS VOID WITHOUT THEM
90-DAY MONEY BACK GUARANTEE
Oversized Tool Accessory Mount
WARRANTY
This MASTERFORCE™brand tool carries our 90-Day Money Back Guarantee.
If you are not completely satisfied with your MASTERFORCE™brand power tool for
any reason within ninety (90) days from the date of purchase, return the tool with your
original receipt to any MENARDS®retail store, and we will provide you a refund - no
questions asked.
1-YEAR LIMITED WARRANTY
This MASTERFORCE™brand tool carries our famous No Hassle 1-Year Limited
Warranty to the original purchaser. If, during normal use, this MASTERFORCE™power
tool breaks or fails due to a defect in material or workmanship within one (1) years from
the date of original purchase, simply bring the tool with the original sales receipt back to
your nearest MENARDS®retail store. At its discretion, MASTERFORCE™agrees to have
the tool or any defective part(s) repaired or replaced with the same or similar
MASTERFORCE™product or part free of charge, within the stated warranty period, when
returned by the original purchaser with original sales receipt. Not withstanding the
foregoing, this limited warranty does not cover any damage that has resulted from abuse
or misuse of the Merchandise. This warranty: (1) excludes expendable parts including
but not limited to blades, brushes, belts, bits, light bulbs, and/or batteries; (2) shall be
void if this tool is used for commercial and/or rental purposes; and (3) does not cover any
losses, injuries to persons/property or costs. This warranty does give you specific legal
rights and you may have other rights, which vary from state to state. Be careful, tools are
dangerous if improperly used or maintained. Seller’s employees are not qualified to
advise you on the use of this merchandise. Any oral representation(s) made will not be
binding on seller or its employees. The rights under this limited warranty are to the
original purchaser of the merchandise and may not be transferred to any subsequent
owner. This limited warranty is in lieu of all warranties, expressed or implied including
warranties or merchantability and fitness for a particular purpose. Seller shall not be
liable for any special, incidental, or consequential damages. The sole exclusive remedy
against the seller will be for the replacement of any defects as provided herein, as long
as the seller is willing or able to replace this product or is willing to refund the purchase
price as provided above. For insurance purposes seller is not allowed to demonstrate
any of these power tools for you.
For questions / comments, technical assistance or repair parts -
Please call toll free at: 1-800-255-7011 (M-F 8am - 6pm CST)

You will need the manual for the safety warnings and precautions, operating and maintenance
procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice
number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for
future reference.
Be sure to read and understand all safety instructions in this manual,
Be sure to read and understand all safety instructions in this manual, including all safety
alert symbols such as “danger”, “warning”, and “caution”, before using this power tool.
Failure to follow all instructions listed below may result in electrical shock, fire and/or
serious personal injury.
WARNING:
NOTES SAVE THIS MANUAL
1. Mount only according to these instructions.
Improper mounting can create hazards.
2. Keep work area clean and well lit.
3. Keep bystanders out of the area during use.
4. This product is not a toy. Do not allow children to play with or near this item.
5. Use for intended purposes only.
6. Inspect before use; do not use if parts are loose or damaged.
7. Maintain product labels and nameplates.
These carry important safety information. If unreadable or missing, contact 1-800-255-7011
for a replacement.
8. Before drilling vise mounting holes, check for hidden electrical wires or cords in drilling path.
9. Do not use this product if under the influence of alcohol or drugs.
Read safety warning labels on Prescriptions to determine if your judgement or reflexes are
impaired while taking drugs. If there is any doubt, do not use this product.
10. Use eye and hand protection. Wear ANSI-approved safety impact goggles and heavy-duty
work gloves during use.
11. DRESS SAFELY. Do not wear loose clothing or jewelry as they can become caught in
moving parts. Wear a protective hair covering to prevent long hair from becoming caught in
the moving parts.
SAFETY INSTRUCTIONS
Page 1Page 4
NOTE
The following safety warnings and precautions.

Adjustable Screw
Base Plate
Clamp Jaws
1 pcs
1 pcs
1 pcs
DESCRIPTION QTYPART #
1
2
3
1. Adjusting the vise base plate loosen the adjustable base screw, (part / adj base screw)
until loose. Rotate the vise to the desired position and tighten the before mentioned
adjustable base screws.
2. Clamping Turn the adjustable screw (part / adj screw) to the desire clamping force. At no
point should you use an extended pole and or tube to increase the amount of force applied
to the adjustable screw as it will damage the vise
3. Anvil (if your vise includes one) when using the anvil (part / anvil) be sure to exercise caution.
Never hit with a hardened striking tool as it may cause shipping of the tool and or anvil and
or personal injury.
13. Do not overreach. Keep proper footing and balance at all times.
14. Stay alert. Watch what you are doing at all times. Use common sense. Do not operate this
product when you are tired or distracted from the job at hand.
15. Damage could occur to your vise and/or work piece if you overtighten the Handle.
16. Check for damaged parts. Before using this product, carefully check that
It will operate properly and perform its intended function. Check for damaged parts and
any other conditions that may affect its operation. Replace or repair damaged or worn
parts immediately.
17. Replacement parts and accessories. When servicing, use only identical replacement parts.
18. Maintain product with care. Keep this product clean and dry, and all moving parts lightly
lubricated for better performance. Keep the handle dry, clean and free from oil, grease,
and solvents.
19. Use the right product for the right job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this tool was
designed. It will do the job better and more safely at the rate
For which it was intended. Do not modify this tool and do not use this tool for any purpose
other than which it was intended.
Page 3
PARTS LIST
OPERATION
STEPS TO MOUNT A VISE
1. Avoid using solvents when cleaning.
2. Most items are susceptible to damage from various types of commercial solvents.
3. Use clean cloths to remove dirt, dust, oil, grease, etc.
4. Lubricate regularly.
MAINTENANCE
Page 2
1. Place the Vise on the surface you intend to mount it to.
2. With a marker trace the inside of the bolt mounting holes.
3. Remove the vise and pre drill holes for mounting hardware.
4. Place the vise back in place and align bolt pattern of base with pre drilled mounting holes.
5. Place screws (not included) through vise base and into pre drilled mounting surface.
6. Install screws being sure not to over tighten.
1
2
3