MasterKraft DA026 User manual

DA026
PULL DOWN/MID ROW

6
7
8
9
15
16
17

─ 3 ─
Important Safety Instructions
Before beginning any fitness program, you should obtain a complete
physical examination from your physician. When using exercise equipment,
basic precautions should always be taken, including the following:
* Read all instructions before using the equipment. These instructions are
written to ensure your safety and to protect the unit.
* Do not allow children on or near the equipment.
* Use the equipment only for its intended purpose as described in this
guide. Do not use accessory attachments that are not recommended by
the manufacturer: such attachments might cause injuries.
* Wear proper exercise clothing and shoes for your workout----no loose
clothing.
* Be careful when getting on or off the equipment.
* Do not overexert yourself or work to exhaustion.
* If you feel any pain or abnormal symptoms, stop your workout immediately
and consult your physician.
* Never operate the unit when it has been dropped or damaged.
* Never drop or insert anything into any opening in the equipment.
* Always check the unit and its cables before each use. Make sure that all
fasteners and cables are secure and in good working condition.
* Frayed or worn cables can be dangerous and may cause injury.
Periodically check these cables for any indication of wear.
* Keep hands, limbs, loose clothing and long hair well out of the way of
moving parts.
* Do not attempt to lift more weight than you can control safely.
* Do not use the equipment outdoors.
Personal Safety During Assembly
* Read each step in the assembly instructions and follow the steps in
sequence. Do not skip ahead. If you skip ahead, you may learn later that
you have to disassemble components and that you may have damaged
the equipment.
* Assemble and operate the equipment on a solid, level surface. Locate the
unit a few feet from walls or furniture to provide easy access. The
equipment is designed for your enjoyment. By following these precautions
and using common sense, you will have many safe and pleasurable hours
of healthful exercise with the equipment.

Instructions
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that all
parts have been included in your shipment. When ordering, use part number
and description from the lists. Use only our replacement part when servicing.
Failure to do so will void your warranty and could result in personal injury.
The equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly. If
you are unable to correct the problem, call your authorized dealer. Be sure to
have your serial number and this manual when calling. When all parts have
been accounted for, continue on.
Tools Required
Ratchet Wrench and Socket
Adjustable Wrench
Rubber Mallet
Hex Key Wrench Set
─ 4 ─

ITEM NO
DESCRIPTION QTY
ITEM NO
DESCRIPTION QTY
1 Weight Stack Frame 1 38 Aluminium Grip Cap 4
2 Adjustable Foot plate 1 39 Aluminium Grip Ring 4
3 Standing Frame 1 40 Bronze Bearing 2
4 Top Frame 1 41 Aluminium Ring 4
5 Swivel Pulley Block 1 42 Aluminium Cap 2
6 Foam Frame 1 43 Nut M10 6
7 Handle Support 1 44 Buon Head Cap Screw M12*100 1
8 Grip 1 45 Socket Head Cap Screw M10*50 4
9 Lat Bar 1 46 Flat Head Cap Screw M10*25 2
10 Foot Tube 1 47 Hex Bolt M10*125 4
11 Hook 1 48 Hex Bolt M10*95 2
12 Swing Tube 1 49 Hex Bolt M10*80 1
13 Rear shroud 1 50 Hex Bolt M10*75 3
14 Front Shroud 1 51 Hex Bolt M10*55 2
15 Scaleboard 1 52 Hex Bolt M10*50 4
16 Foam Axle 72.5 1 53 Hex Bolt M10*30 2
17 Stopper 4 54 Hex Bolt M10*30 2
18 Mount Sleeve 2 55 Hex Bolt M10*20 10
19 Pulley Spacer 2 56 Hex Bolt M10*15 2
20 Cable Retainer Bracket 2 57 Socket Head Cap Screw M8*25 2
21 Guide Rod 2 58 Socket Head Cap Screw M8*20 2
22 Back Pad 1 59 Socket Set Screw M8*10 2
23 Foam 2 60 Socket Set Screw M5*3 16
24 Grip 2 61 Flat Washer φ13 2
25 Pulley Cover 8 62 Flat Washer φ11 48
26 Pulley 11 63 Flat Washer φ9 4
27 Plug RT50 3 64 Nylon lock Nut M12 1
28 Top Shroud 1 65 Nylon lock Nut M10 21
29 Pop Pin 1 66 Nylon lock Nut M8 2
30 Plug F38 1 67 Self-tapping screw 4
31 Plug RT40 2 68 Spring Washer 2
32 Grip 2 69 Weight Stack 15
33 Rubber Foot 3 70 Top Plate 1
34 Foot Sleeve 2 71 Selector Pin W/Coil 1
35 Bumper 2 72 Weight Rubber Bumper 2
36 Cable_1 1 73 Chain 2
37 Cable_2 1 74 Gear Hook 2

6
52
4
45
67
1
47
28 1821
13
19
57
68
63
26
70
20
69
52
71 72 43
48
33
17
51
30
14
46
54
25
5
56
44 23
62
105027 34
2
53
58
22
15
35
66
31
29
59
61
6
16
12
40
64
42
765
3
24
9
73
38 60
32
8
55
11
60
39
39
38
74
73
62
26
6265
60
65
62
26
25 47 62
65
62 65
45
62
17
26
62
46
41
23
63
61
62
55
62
6265
49
62
62
62
62
45
62
6562 5062
65 6226
65 62

7

8
125 275

9
STEP 1 | USER FRAME INSTRUCTIONS & NOTES
NOTE: WRENCH TIGHTEN SCREWS.
ITEMNO DESCRIPTION QTY
48
47
54
62
65
2
2
14
6
1 1
1
1
4
3
4
Weight Stack Frame
Top Frame
47
62
4
3
1
48
62
65
62
54
62
62
65
47
62
65
62
Standing Frame
Hex Bolt M10*125
Hex Bolt M10*95
Hex Bolt M10*30
Flat Washer φ11
Nylon lock Nut M10

10
NOTE: WRENCH TIGHTEN SCREWS.
STEP 2 | USER FRAME INSTRUCTIONS & NOTES
40 16 40
59
64 61
44
61
50
62
65 62
6
10
ITEMNO DESCRIPTION QTY
44
40
50
61
62
64
65
1
2
2
4
6 1
1
1
1
2
2
10
16
Foam Frame
Foot Tube
Foam Axle 72.5
Bronze Bearing
Buon Head Cap Screw M12*100
Hex Bolt M10*75
Flat Washer φ13
Flat Washer φ11
Nylon lock Nut M12
Nylon lock Nut M10

11
NOTE: WRENCH TIGHTEN SCREWS.
STEP 3 | USER FRAME INSTRUCTIONS & NOTES
21
18
70
69
72
71
57 68 63
ITEMNO DESCRIPTION QTY
71
70
72
1
2
18 1
1
15/19/24
2
2
2
2
21
69
57
63
68
Mount Sleeve
Guide Rod
Weight Stack
Top Plate
Selector Pin W/Coil
Weight Rubber Bumper
Spring Washer
Flat Washer φ9
SocketHeadCapScrewM8*25

12
NOTE: WRENCH TIGHTEN SCREWS.
STEP 4 | USER FRAME INSTRUCTIONS & NOTES
8
9
ITEMNO DESCRIPTION QTY
8 1
19
Grip
Lat Bar

13
NOTE: WRENCH TIGHTEN SCREWS.
STEP 5 | USER FRAME INSTRUCTIONS & NOTES
46 42 41 23 41
53
62
22
50
62
ITEMNO DESCRIPTION QTY
22
41
46
50
53
62
42
1
2
4
2
2
1
2
3
23
Back Pad
Foam
Aluminium Ring
Aluminium Cap
FlatHead Cap Screw M10*25
Hex Bolt M10*75
Hex Bolt M10*30
Flat Washer φ11

14
NOTE: WRENCH TIGHTEN SCREWS.
STEP 6 | USER FRAME INSTRUCTIONS & NOTES
ITEMNO DESCRIPTION QTY
13
14
55
62
1
1
1
8
10
28
65 2
Rear shroud
Front Shroud
Top Shroud
Hex Bolt M10*20
67 4
Self-tapping screw
Flat Washer φ11
Nylon lock Nut M10
67
28 55
62
13 14
62
65
5562

15

16

17