SmartRemote Menu Structure
Language
English
Nederlands
Deutsch
(Paired)
Brightness
100%
Auto standby
Never
Enter standby
At any time pressing left
and right button for 3
seconds will shutdown the
SmartRemote
Unpair device
Are you sure?
About
Version: 1.1.9
Revision: AA0101
Bootlaoder ver.:0.1.0
Bus voltage: 13.35V
Press
to shutdown the SmartRemote
immediately.
Press to return to the Main menu.
Press the up or down button to increase or
reduce the brightness in steps of 5
%
.
Press
to confirm your choice and return
to the Main menu.
By default, the SmartRemote does not shut
down automatically.
Other options are: 2, 5, or 10 minutes.
Press
to confirm your choice and return
to the Main menu.
Language is the language of the
SmartRemote itself.
Paired language is the language of the
connected device.
Press
to confirm your choice and return
to the Main menu.
Press
to unpair the device from the
SmartRemote immediately.
Press to return to the Main menu.
Information “About” the SmartRemote.
Press
to return to the Main menu..
Enter the main menu by pressing both the left + the right button at the same time, for less than 3 seconds.
Main menu:
• Enter standby (pressing any button will turn the SmartRemote back on.)
• Brightness
• Auto standby
• Language
• Paired language
• Unpair device
• About
• Exit menu
The SmartRemote will exit the main menu if no button is pressed within 10 seconds, or when you select “Exit menu”.
Shaded fields have the focus.
