Matco Tools MAXIMUS PRO HD User manual

I
User Manual MDMAXPROHD
2311226-16
www.matcotools.com 877-853-3738
WARNING
Study, understand and follow all instructions provided with this product. Read these instructions carefully
before installing, operating, servicing or repairing this tool. Keep these instructions in a safe, accessible
place.
Caution:To help prevent personal injury,
1. Always perform automotive testing in a safe environment.
2. Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
3. DO NOT attempt to operate the tool while driving the vehicle. Have second personal operate the tool.
Any distraction may cause an accident.
4. Before starting the engine, put the gear lever in the Neutral position (for manual transmission) or in
the Park (for automatic transmission) position to avoid injury.
5. NEVER smoke or allow a spark or flame in vicinity of battery or engine. Do not operate the tool in
explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
6. Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
7. Wear an ANSI-approved eye shield when testing or repairing vehicles.
8. Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.
9. Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark
plugs. These components create hazardous voltage when the engine is running.
10.To avoid damaging the tool or generating false data, please make sure the vehicle battery is fully
charged and the connection to the vehicle DLC (Data Link Connector) is clear and secure.
11. Automotive batteries contain sulfuric acid that is harmful to skin. In operation, direct contact with the
automotive batteries should be avoided. Keep the ignition sources away from the battery at all times.
12.Keep the tool dry, clean, free from oil, water or grease. Use a mild detergent on a clean cloth to clear
the outside of the equipment when necessary.
13.Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
14.Store the tool and accessories in a locked area out of the reach of children.
15.Do not use the tool while standing in water.
16.Do not expose the tool or power adapter to rain or wet conditions. Water entering the tool or power
adapter increases the risk of electric shock.
1 7. When an engine is operating, keep the service area well-ventilated or attach a building exhaust
removal system to the engine exhaust system. Engines produce various poisonous compounds
(hydrocarbon, carbon monoxide, nitrogen oxides, etc.) that cause slower reaction time and result in
death or serious personal injury.
INTENDED USE OFTHETOOL
Compatible with heavy-duty and commercial vehicles, the MDMAXPROHD diagnostic tool is exclusively
intended for professional technicians.
Do not use this tool outside of the designed intent. Never modify the tool for any other purpose or use.
PRODUCT INFORMATION
Made in China
to Matco specifications

II
User Manual MDMAXPROHD
www.matcotools.com 877-853-3738
2311226-16
Using This Manual
This manual contains device usage instructions.
Some illustrations shown in this manual may contain modules and optional equipment that are not included
in your system.
Conventions
The following conventions are used.
Notes
A NOTE provides helpful information such as additional explanations, tips, and comments.
Example:
Note: In general, vehicle identification numbers are standardized - all contain 17 characters. VIN
characters may be capital letters A through Z and numbers 1 through 0; however, the letters I, O and Q
are never used in order to avoid mistakes of misreading. No signs or spaces are allowed in the VIN.
Warning
WARNING indicates a hazardous situation which, if not avoided, could result in minor or moderate injury to
the operator or to bystanders.
Example:
Warning: Retrieving and using DTCs for troubleshooting vehicle operation is only one part of an overall
diagnostic strategy. Never replace a part based only on the DTC definition. Each DTC has a set of testing
procedures, instructions and flow charts that must be followed to confirm the location of the problem. This
information can be found in the vehicle’s service manual.
Danger
DANGER indicates an imminently or potentially hazardous situation which, if not avoided, could result in
death or serious injury to the operator or to bystanders.
Example:
Danger: If you must drive the vehicle in order to perform a troubleshooting procedure, always have
a second person help you. Trying to drive and operate the diagnostic tool at the same time is dangerous,
and could cause a serious traffic accident.
Illustrations
Illustrations used in this manual are samples, the actual testing screen may vary for each vehicle being
tested. Observe the menu titles and on-screen instructions to make correct option selection.
Compliance Information
FCC ID: 2AUKMMAXFLEXPRO
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio

III
User Manual MDMAXPROHD
2311226-16
www.matcotools.com 877-853-3738
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The highest reported SAR for
stand-alone and simultaneous transmission exposure conditions are below the maximum value. End-users
must be informed of the operating requirements for satisfying RF exposure compliance.

IV
User Manual MDMAXPROHD
www.matcotools.com 877-853-3738
2311226-16
Table of Contents目目
1 Introduction................................................................................................................................................ 1
1.1 Product Profile........................................................................................................................................... 1
1.2 Accessory Checklist .................................................................................................................................. 2
2 Components & Controls............................................................................................................................ 4
2.1 Display Tablet ............................................................................................................................................ 4
2.2 VCI Device ................................................................................................................................................ 6
2.3 Technical Specifications ............................................................................................................................ 7
3 Initial Use.................................................................................................................................................... 8
3.1 Charging the Tablet ................................................................................................................................... 8
3.2 Power ON/OFF ......................................................................................................................................... 8
3.3 Locator & Navigation Buttons................................................................................................................... 8
3.4 Wi-Fi Setup ............................................................................................................................................... 9
3.5 Adjust Brightness ..................................................................................................................................... 9
3.6 Change System Language........................................................................................................................ 9
3.7 Set Standby Time...................................................................................................................................... 9
4 Getting Started..........................................................................................................................................10
4.1 User Registration.....................................................................................................................................10
4.2 Basic Operations on Diagnostic App .......................................................................................................12
4.2.1 Switch between different function modules ..................................................................................12
4.2.2 How to arrange diagnostic vehicle software icons? .......................................................................12
4.2.3 How to distinguish if the software is locked or not? ......................................................................12
4.3 Function Modules ....................................................................................................................................13
4.3.1 Diagnostics.....................................................................................................................................13
4.3.2 Toolbox...........................................................................................................................................13
4.4 Diagnostics toolbar ..................................................................................................................................14
5 Start Diagnostics...................................................................................................................................... 15
5.1 Connections.............................................................................................................................................15
5.1.1 Preparation......................................................................................................................................15
5.1.2 Vehicle Connection..........................................................................................................................15
5.2 Communication Settings .........................................................................................................................15
5.3 Start Diagnostics .....................................................................................................................................16
5.3.1 System Scan...................................................................................................................................16
5.3.2 Manual Diagnosis ...........................................................................................................................16
5.4 Diagnostic History (Previous Session) ................................................................................................... 22
5.5 HD Reset................................................................................................................................................ 23
6Toolbox...................................................................................................................................................... 24
6.1 Maximus Fix HD .................................................................................................................................... 24
6.2 Saved Report .......................................................................................................................................... 24
6.3 Update.................................................................................................................................................... 24
6.3.1 Update Diagnostic Software & APP .............................................................................................. 24
6.3.2 Update Frequently Used software................................................................................................. 25
6.4 Tech 2 Tech .............................................................................................................................................. 25
6.4.1 Add Friends.................................................................................................................................... 26
6.4.2 Start Instant Messaging ................................................................................................................ 26
6.4.3 Launch Remote Diagnosis (Scanner to Scanner)........................................................................... 27
6.4.4 Launch Remote Diagnosis (Scanner to PC)................................................................................... 29

V
User Manual MDMAXPROHD
2311226-16
www.matcotools.com 877-853-3738
6.5 Settings................................................................................................................................................... 30
6.5.1 General .......................................................................................................................................... 30
6.5.2 VCI ................................................................................................................................................. 31
6.5.3 VCI Management ........................................................................................................................... 31
6.5.4 ROXIE MANAGEMENT ................................................................................................................. 31
6.5.5 Color Theme .................................................................................................................................. 31
6.5.6 MD Printer Connection.................................................................................................................. 32
6.5.7 Shop Information........................................................................................................................... 32
6.5.8 Shop Management........................................................................................................................ 32
6.5.9 Favorites ........................................................................................................................................ 32
6.5.10 Hide or Remove Software............................................................................................................ 32
6.5.11 Backup/Restore............................................................................................................................ 33
6.6 Feedback ................................................................................................................................................ 33
6.7 Videoscope ............................................................................................................................................. 33
6.8 MaxSensor ............................................................................................................................................. 33
6.9 About ...................................................................................................................................................... 33
7 FAQ ........................................................................................................................................................... 34

Safety & Accessory
Initial UseDiagnosticsFAQ & Appendix Product Profile
1
2311226-16
www.matcotools.com 877-853-3738
User Manual MDMAXPROHD
1 Introduction
1.1 Product Profile
MAXIMUS PROHD (MDMAXPROHD) is an evolutionary smart solution for specialized heavy-duty vehicle
diagnosis and maintenance. It inherits from advanced diagnosing technology and is characterized by
covering a wide range of vehicles, featuring powerful functions, and providing precise test result.
Through the wireless communication between VCI dongle and MDMAXPROHD tablet, it achieves full car
model and full system vehicle trouble diagnosis, which include Reading DTCs, Clearing DTCs, Reading Data
Stream, Actuation Test and Special Functions.
Moreover, taking advantage of the mobile Internet, it also integrates One-click Update, Tech 2 Tech (Remote
Diagnosis) and Repair Data, which helps to diagnose vehicle issues more efficiently, and greatly increase
customer’s retention and boost shop revenue.
MDMAXPROHD adopts a high performance-price ratio display tablet, which comes loaded with the
powerful 4-core 2.0GHz processor, 4G RAM, and a 10.1” IPS capacitive touch screen with a resolution of
1280 x 800 dots.
It supports the following functions:
• System Scan: This module allows you to quickly scan and access all available systems installed on the
test vehicle.
• Local Diagnosis: To perform diagnosis by executing on-screen commands step by step. Diagnosis
functions include: Read DTCs, Clear DTCs, Read Data Stream, Special Functions, etc.
• Tech 2 Tech (Remote Diagnosis): This option aims to help repair shops or technicians launch instant
messaging and remote diagnosis, making the repair job getting fixed faster.
• HD Service Reset: It offers coding, reset, relearn and more service functions, to help vehicles get back
to functional status after repair or replacement. Available tests vary by vehicle manufacturer, year, and
model.
• CAN BUS Pin Detection: Allows you to detect the voltage of the vehicle OBD II diagnostic socket pins
and the supported protocol types to help technicians judge the OBD II diagnostic interface.
• One-click Update: Lets you update your diagnostic software online.
• Diagnostic History (Previous Session): Provides a quick access to the tested vehicles and users can
choose to view the test report or resume from previous diagnostic session, without starting from scratch.
• Diagnostic Feedback: Enables you to submit the vehicle issue to us for analysis and troubleshooting.
• Vehicle Coverage: Quick dial to view the vehicle models that MDMAXPROHD covers.
• Backup/Restore: This feature lets you back up the recorded files to external storage device/restore the
recorded data from the external storage device.
• Add-on Modules: Video Scope and MaxSensor (sold separately) are available as add-on modules of the
MDMAXPROHD.

Safety & Accessory Initial Use Diagnostics FAQ & Appendix
Product Profile
2www.matcotools.com 877-853-3738
2311226-16
User Manual MDMAXPROHD
1.2 Accessory Checklist
Common accessories are same, but for different destinations, the accessories may vary. The following
accessory items are only for reference. Please consult from the Matco Distributor or check the package list
supplied with this tool together.
No. Name Qt. Picture & Notes
1Display Tablet 1
(A tablet for showing test results.)
2VCI (Vehicle Communication
Interface) device 1
(A device for accessing vehicle data.)
3Power Adapter 1
(To supply power to the tablet through
connection to AC outlet.)
4 Diagnostic Cable 1
(Connects the VCI dongle to the vehicle’s
OBD II DLC port. It can be separated into
two parts: DB15F to HD15F data cable and
HD15M to OBD II adapter.)
5 Password Envelope 1
(A piece of paper bearing Product S/N and
Activation Code, which is required for your
registration.)

Safety & Accessory
Initial UseDiagnosticsFAQ & Appendix Product Profile
3
2311226-16
www.matcotools.com 877-853-3738
User Manual MDMAXPROHD
6 Data Cable 1
(Connect the VCI and diagnostic tool to
perform vehicle diagnosis.)
7 Battery Cable Clamps 1
(To provide power to the non-16pin
connector through connection to the
vehicle's battery.)
8 Cigarette Lighter Cable 1
(Supply power to the VCI through connection
to cigarette lighter receptacle.)
9 Adapter Cables 1
(Connect the diagnostic cable and vehicle’s
non-OBD II diagnostic socket.)

Safety & Accessory Initial Use Diagnostics FAQ & Appendix
Product Profile
4
User Manual MDMAXPROHD
www.matcotools.com 877-853-3738
2311226-16
2 Components & Controls
There are two main components to the diagnostic system:
• Display Tablet -- the central processor and monitor for the system (For details, please refer to Chapter
2.1.)
• VCI device -- the device for accessing vehicle data (For details, please refer to Chapter 2.2.)
2.1 Display Tablet
The tablet acts as the central processing system, which is used to receive and analyze the live vehicle data
from the VCI device and then output the test result.
The following table formulates ports and indicators of display tablet:

Safety & Accessory
Initial UseDiagnosticsFAQ & Appendix Product Profile
5
User Manual MDMAXPROHD
2311226-16
www.matcotools.com 877-853-3738
No. Name & Descriptions
1 Memory Card Slot -- To store the memory card for storage expansion.
2 Type C Charging Port -- Reserved for charging the tablet.
3Power/Screen Lock Button -- To turn the tablet on/off with long press, or lock the screen
with short press.
4 Volume Buttons -- To adjust the volume.
5Data Transmission Port -- Reserved for add-on modules (such as Videoscope, etc.), and
other devices with similar port.
6 Microphone
7Charging indicator -- It illuminates red while the tablet is charging. Once it is fully charged,
it will illuminate solid green.
8 10.1" Capacitive Touch Screen
9 Ambient Light Sensor
10 Front Camera
11 Rear Camera
12 Camera Flash
13 Audio Speaker
14 Adjustable Kickstand - Flip out it to any angle and work comfortable at your desk, or hang
it on the steering wheel.

Safety & Accessory Initial Use Diagnostics FAQ & Appendix
Product Profile
6
User Manual MDMAXPROHD
www.matcotools.com 877-853-3738
2311226-16
2.2 VCI Device
The MAXSYNC VCI dongle works as a heavy duty / medium duty / light duty vehicle communication
interface device, which is used to connect to the vehicle’s DLC (Data Link Connector) port via the diagnostic
cable to read the test data and then send it to the tablet.
No. Name & Descriptions
1 DB-15 Diagnostic Connector -- To connect the diagnostic cable.
2 Touch Screen
3
DC-IN Port
*Warning: The VCI dongle obtains power through the vehicle's DLC (Data Link Connector) via
the diagnostic cable. Do NOT connect the DC-IN port to an external DC power supply if the VCI
dongle can be powered up normally.
If the pin of the DLC is damaged or the DLC has insufficient power, connect the DC-IN port to
an external DC power supply.
No responsibility can be assumed for any damage or loss caused as a result of not strictly
following the above method.
4 Data I/O Port -- To connect it to the tablet to perform diagnosis via the data cable.
5 LAN/WAN Port -- Reserved for other purposes.

Safety & Accessory
Initial UseDiagnosticsFAQ & Appendix Product Profile
7
User Manual MDMAXPROHD
2311226-16
www.matcotools.com 877-853-3738
2.3 Technical Specifications
A. DisplayTablet
Item Description
Operating system Android 10.0
CPU 4-core processor, 2.0GHz
Display 10.1 inch capacitive touch screen with 1280 x 800 resolution
Memory 4GB
Storage 128GB
Connectivity • WLAN (802.11 b/g/n/ac)
• USB ports (1 x Type-C + 1 x Type-A)
• BT2.1, BT3.0, BT4.0, BT4.1, BT5.0, BT5.1
Cameras 2MP front-facing camera + 8MP rear-facing camera
HDMI • Gravity Accelerometer
• 3-Axis Acceleration Sensor
Operating Temperature 32 ~122℉
Storage Temperature -4 ~158℉
B. VCI device
Item Description
Power Supply DC 9V ~ 36V
Operating System Linux
Memory 256MB
Storage 8GB
Connectivity • Wi-Fi: Dual Band 2.4 & 5GHz
• DB15 port + Type-B USB port + RJ15 port + DC-IN port
Working Temperature 32 ~122℉

Safety & Accessory Initial Use Diagnostics FAQ & Appendix
Product Profile
8
User Manual MDMAXPROHD
www.matcotools.com 877-853-3738
2311226-16
3 Initial Use
3.1 Charging the Tablet
Warning:
• Only use the included power adapter to recharge the tablet. Use of any other adapter will damage the
tool. We assume no responsibility for damage or loss resulting from using other similar adapters other
than the specified one.
• Always charge on a non-flammable surface in a well-ventilated area.
To check the battery power level, press and hold the Power button about 3 seconds to turn on the tablet.
Power level is indicated as a percentage in the upper right corner of the screen. If the power level drops
below 10% while the tablet is on, a Connect Charger notification will appear on the screen.
1. Connect one end of the power adapter to Type C
charging port of the tablet, and the other end to the
AC outlet.
2. The charging LED illuminates solid red and the
charging symbol will appear on the screen.
3. Once it illuminates solid green, it indicates that
the battery is fully charged and the charging
complete symbol replaces the charging sym-
bol. Disconnect the power adapter from the AC
outlet.
3.2 Power ON/OFF
Note: If it is the first time you use the tablet or the tablet keeps idle for a long time, it could fail to be
turned on. It results from low battery. In this case, please recharge it for a while and try to turn it on.
1. Press and hold the POWER button for about 3 sec-
onds to turn on the tablet. The system starts initial-
izing and then enters the Home screen.
2. To turn the tablet off, press and hold the
POWER button until an option menu appears.
Tap Power Off.
3.3 Locator & Navigation Buttons
1234 5 6
On-screen keys and status bar are as follows:
1Tap to return to previous screen or exit the application.
2 Tap
to navigate to the Android System’s home screen.
3Tap
to display a list of applications that are currently running or recently used. To open an
application, tap it. To remove an application, swipe it upwards.
4 Tap
to display all in-app tasks that are currently running.
5Tap
to capture the current screen and all captured screenshots are stored in the
Screenshots folder.
6: Shows whether the VCI device is properly connected or not.

Safety & Accessory
Initial UseDiagnosticsFAQ & Appendix Product Profile
9
User Manual MDMAXPROHD
2311226-16
www.matcotools.com 877-853-3738
3.4 Wi-Fi Setup
MDMAXPROHD has built-in Wi-Fi that can be used to get online. Once you’re online, you can register your
tool, update diagnostic software & APK, browse the Internet, get apps and send email on your network.
Note: Once WLAN is set as ON, the tablet will consume more power. While it keeps unused, please
set it off to save power. While WLAN is not in use, please turn it off to conserve battery power.
Connect to a WLAN Network
1. On the Home screen, tap Settings -> Network & in-
ternet -> Wi-Fi.
2. Slide the Wi-Fi switch to ON, the tablet starts search-
ing for available wireless LANs.
3. Select the desired WLAN network from the
list. If the chosen network is open, you can
connect directly. A password may be required
for secured networks.
Disconnect from a WLAN Network
1. On the Home screen, tap Settings -> Network & in-
ternet -> Wi-Fi.
2. Tap the network with a Connected status, then
tap Forget.
3.5 Adjust Brightness
Note: Reducing the brightness of the screen is helpful to conserve the battery power.
1. On the home screen, tap Settings -> Display ->
Brightness level.
2. Drag the slider to adjust it.
3.6 Change System Language
The tool supports multiple system languages. To change the language of the tool, please do the following:
1. On the home screen, tap Settings -> System -> Lan-
guage & input -> Languages.
2. Tap Add a language, and then choose the desired
language from the list.
3. Tap and hold the desired language and drag it
to the top of the screen and then release it, the
system will change into the target language.
3.7 Set Standby Time
If no activities are made within the defined standby period, the screen will be locked automatically and the
system enters sleep mode to save power.
1. On the home screen, tap Settings -> Display -> Ad-
vanced -> Screen timeout.
2. Choose the desired sleep time.

Safety & Accessory Initial Use Diagnostics FAQ & Appendix
Product Profile
10
User Manual MDMAXPROHD
www.matcotools.com 877-853-3738
2311226-16
4 Getting Started
4.1 User Registration
Users need to go through an sign-up process before using MDMAXPROHD.
Notes:
• Before registering, please make sure that your tablet has a strong and stable Wi-Fi signal.
• While activating device, the Serial number and Verification code can be found in the included password
envelope. To obtain Activation code, please contact with your dealer.
Follow the steps below to proceed:
1. Tap “MDMAXPROHD” on the home screen. For new user, tap “REGISTER” to go to step 2.
2. Fill in your account information and device information and then tap “ACTIVATE”.
Notes:
Serial number is a 12-digit number starting with 98 -- you can find it on the back of your tool.
Verification code is a 8-digit number stored in the Private & Confidential sheet.
Activation code is printed on the receipt, or consult your dealer for it.
On-screen Buttons:
Forgot Password: If you forgot the password, tap it and then follow the on-screen instructions to reset a
new password.
3. Tap “RUN DIAGNOSTICS” to launch diagnostics.

Safety & Accessory
Initial UseDiagnosticsFAQ & Appendix Product Profile
11
User Manual MDMAXPROHD
2311226-16
www.matcotools.com 877-853-3738
“MANAGE SUBSCRIPTIONS” enables you to renew your subscriptions or purchase new software
packages.
On-screen Buttons:
Sign Out: Tap it to log out the system.
Update Profile: Tap it to modify personal information.
4. Tap “ ” on the top left-hand corner of the screen to switch to the Toolbox module.
Note: If a number indicator appears on upper right corner of the Update logo, it indicates newer
software is available.
5. Tap “Update” to enter the update center.

Safety & Accessory Initial Use Diagnostics FAQ & Appendix
Product Profile
12
User Manual MDMAXPROHD
www.matcotools.com 877-853-3738
2311226-16
Make sure all brands are selected, tap “Update” to start updating.
Tap the “OK” button on the pop-up message box when update is complete.
Note: Download and installation will take approximately 10 minutes depending on the internet
connection.
4.2 Basic Operations on Diagnostic App
4.2.1 Switch between different function modules
There are 2 function modules available on the MDMAXPROHD: Diagnostics and Toolbox.
Swipe in from the left/right edge of the screen to switch between function modules.
Alternatively, you can also tap on the upper left corner of the screen to toggle between Diagnostics
and Toolbox.
4.2.2 How to arrange diagnostic vehicle software icons?
All software icons, by default are organized by the system. Many display rules are available to meet your
preference.
To re-organize it, press and hold certain software icon, an option menu will pop up on the screen. Choose
the display rule and the system will arrange the icon as desired.
If you choose “Pin to the top”, the icon will be displayed on the top of the screen and marked with an
orange solid dot.
4.2.3 How to distinguish if the software is locked or not?
If the software is locked, tap it to display the latest software summary. In this case, you need to purchase
the software to unlock its content. Once it is unlocked, the software icon will turn into orange.

Safety & Accessory
Initial UseDiagnosticsFAQ & Appendix Product Profile
13
User Manual MDMAXPROHD
2311226-16
www.matcotools.com 877-853-3738
4.3 Function Modules
There are 2 function modules available on the MDMAXPROHD: Diagnostics and Toolbox.
4.3.1 Diagnostics
It mainly includes the following items:
Heavy Duty
System Scan Quickly scan which systems are equipped on the test vehicle.
CAN BUS Pin
Detection
Allows you to detect the voltage of the vehicle OBD II diagnostic socket
pins and the supported protocol types to help technicians judge the OBD
II diagnostic interface.
Maximus HD Fix
This modules allows you to access full instructions, flow charts, wiring
diagrams and more of heavy-duty vehicles to walk through how to fix and
finish the job.
HD Reset
It offers coding, reset, relearn and more service functions of heavy-duty
vehicles, to help vehicles get back to functional status after repair or
replacement.
Vehicle Voltage Performs a check of the vehicle’s battery to ensure the system is
operating within acceptable limits.
Previous
Sessions
Provides a quick access to the previously tested vehicles. Testing can be
resumed from the previous operation without starting from scratch.
Explore OEM
Brands Retrieve or select the desired vehicle diagnostic software.
Portal Quickly access our portal website.
4.3.2 Toolbox
It mainly includes the following items:
Maximus HD Fix Another access to the Maximus HD Fix on the main screen.
Saved Report Includes Health report, Recorded Data, Remote Report, Data Samples
and ROXIE Reports.
Update To update vehicle diagnostic software and APK.
Tech 2 Tech
This option aims to help repair shops or technicians launch instant
messaging and remote diagnosis, making the repair job getting fixed
faster.
Settings
To make some system settings, including VCI Management, MD Printer
Connection, Shop Information, Icon Size, Vehicle Voltage and Hide/
Remove Software, etc.
Feedback This item allows you to feedback your diagnostic problems to us for
analysis and troubleshooting.
Videoscope To check unseen or unreachable parts or components.
MaxSensor This module is specially designed to diagnose and simulator vehicle
sensor faults quickly and conveniently.
About Includes FAQ, Vehicle Coverage, Quick Start Guide and User Manual, etc.

Safety & Accessory Initial Use Diagnostics FAQ & Appendix
Product Profile
14
User Manual MDMAXPROHD
www.matcotools.com 877-853-3738
2311226-16
4.4 Diagnostics toolbar
The diagnostics toolbar contains a number of buttons that enables various procedures. It is hidden under
at the top of the vehicle diagnostic screens throughout the diagnostic session. Refer to the table below
for a brief description of the functions of the diagnostics toolbar buttons.
Print
Tap to print the current screen.
To perform printing, you need to purchase an extra Wi-Fi printer
separately.
Exit Session Tap to exit the current diagnostic session.

Safety & Accessory
Initial UseDiagnosticsFAQ & Appendix Product Profile
15
User Manual MDMAXPROHD
2311226-16
www.matcotools.com 877-853-3738
5 Start Diagnostics
5.1 Connections
5.1.1 Preparation
1. Make sure that the ignition is turned off and vehicle battery voltage range is 9-14V or 18-30V.
2. Find DLC location.
For Commercial Vehicles, the DLC is generally located in driver’s cab.
3. Refer to Chapter 5.1.2 to make connection.
4. Turn the vehicle’ ignition ON with engine OFF.
5. Now the tool is ready for diagnostics.
5.1.2 Vehicle Connection
The method used to connect the VCI device to a vehicle’s DLC depends on the vehicle’s configuration as
follows:
For OBD II vehicles, use the included diagnostic cable (DB15F to HD15F data cable and HD15M to OBD16
adapter) to connect the VCI to the vehicle’s DLC port.
1. VCI
2. DB15F to HD15F data cable
3. HD15M to OBD16 adapter
4. Vehicle’s DLC port
For non-OBDII vehicles, refer to the above figure to make connection.
1. Select the appropriate adapter according to the vehicle’s DLC port type (4).
2. Loosen the captive screws of the DB15F to HD15F data cable (2) and disconnect the HD15M to OBD16
adapter (3) from the data cable.
3. Connect the data cable (2) with the target adapter on the above figure and tighten the screws. Other
steps shall also apply.
If you choose to perform vehicle diagnosis via data cable, connect one end of the data cable into the VCI,
and the other end into the data transmission port of the tablet.
5.2 Communication Settings
There are two kinds of ways available for the tablet to communicate with the VCI device: wireless and
wired (USB).
After the user registration is successfully finished, the wireless communication between the tablet and the
VCI device is automatically established and user has no need to configure it again.
The USB connection is a simple & quick way to establish communication between the tablet and the VCI.
After properly connecting the data cable from the tablet to the VCI, the VCI navigation button at the bottom