Matelec FPC-30002 Instructions for use

DUAL HOT WATER
CIRCULATOR
PUMP 1
MAN
PUMP 2
MAN
AUTO
-DANGER-
HIGH VOLTAGE
DO NOT OPEN COVER
AUTHORISED
PERSONS ONLY
FPC-SERIES
DOC: FPC-30002 VER 1.0
PUMPCONTROL
OWNER’S
OPERATION
MANUAL
Econo Recirculating Controller Installation
and Operating Instructions
MODEL: FPC-30002

2
FRONT
Top
Bottom
1. Controller enclosure must be
mounted in a vertical position.
2. Ensure mounting method does
not compromise enclosure
weather proof rating.
3. Ensure cables/conduits entering
the panel have mechanical
protection and that the
penetrations are sealed and do
not compromise the weather
proof rating of the enclosure.
PUMP 1
PUMP 2
EARTH
ACTIVE
NEUTRAL
PUMP 1 PUMP 2SUPPLY
240Vac
SUPPLY
EARTH
ACTIVE
NEUTRAL
EARTH
ACTIVE
NEUTRAL
2 4 0 V a c C o n n e c t i o n s
INSTALLATION
CONNECTION
MOUNTING
DUAL HOT WATER
CIRCULATOR
PUMP 1
MAN
PUMP 2
MAN
AUTO
-DANGER-
HIGHVOLTAGE
DONOT OPEN COVER
AUTHORISED
PERSONSONLY
FPC-SERIES

3
SETTING UP
MATELEC TIME CLOCK
COM- 30314
54 3
12
23:36
AUTO
FRI
D+P H+ M+
MANUALRESET
Step Key Programming
1 Press P Setting 1 ON time (display 1 on)
2 Press H+/M+ Setting hours and minutes
3 Press D+ Select same everyday, different day, MO-FR, MO-SA,
SA-SU, MO WE FR, TU THU SA, MO-WE,
TH-SA. (if same everyday, no need to press this key)
4 Press P Setting 1 OFF time (display 1 off)
5 Press H+/M+ Setting hours and minutes of the turn off time
6 Press D+ If you want the same setting every day, there is no
need to press this key
7 Repeat steps 2~6 Set 2-17 ON/OFF times
8 Press End
1. To start switch, press Reset key
2. To adjust the present time, please press
key, then press D+, H+, M+ to adjust the Days, Hours and Minutes.
3. Programming steps as follows:

4
• Weatherproof Poly Enclosure
• Pump- 240Vac 6Amp (MAX)
• Auto/Manual Selection
• Mounting Brackets Included
OPERATION
CIRCUIT DIAGRAM
A
N
1 2
10AMP
C/B
PUMP 1
PUMP 2
TIME
CLOCK
3
5
4
AUTO
PUMP 2
MAN
PUMP 1
MAN
R1/2
PROGRAMMABLE
TIMER
SUPPLY