Mattel BOOMCO RAPID MADNESS User manual

A. Fully load clip with darts.
PERFORMANCE TIPS
3
2
CAUTION: Do not aim at eyes or face.
TO AVOID INJURY: Use only darts
designed for this product.
Do not modify rounds, darts, or dart blaster.
Please keep these instructions for future reference as they contain important information.
GAUNTLET
INSTRUCTIONS
CONTENTS
1
SHIELDS
2
ATTACHING TARGETS
6
CLEANING DARTS
& ROUNDS
8
REPLACING TARGETS
& SHIELDS
9
1
4
WARNING: Do not aim at eyes or face. Only use
projectiles supplied with this toy.
Do not fire at point blank range.
Always wear appropriate eye-wear,
sold separately.
x 30
INSTRUCTION SHEET
SPECIFICATIONS
Toy:
Toy No.:
Part No.:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
DATE:
REV. DATE:
CGN78
RAPID MADNESS W/ ROUND
0920
A4
A5
70 gsm
One
black
FSC recycled paper
02.20.14
02.21.14
REMOVING DARTS
& ROUNDS
7
©2014 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations
1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty.,
Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World
Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, 13th
Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Malaysia. Tel:[phone], Fax:[phone].
CGN78-0920
B. Insert the fully loaded clip from the left
side of the blaster with the arrowheads
pointing right.
Pump sliding handle all the way forward and all the
way back up to 18 times for maximum fire power.
C.
D.
A.
Remove empty clip from blaster. B. Press and hold RESET button and
trigger to release all air from blaster.
IMPORTANT:
Release all air from
blaster when not in use.
Check if there are empty slots in the clip. Press and release RESET button and pull trigger to advance
clip one slot. At last empty slot, press and release RESET button and pull trigger to fire blaster.
1.
Pump sliding handle again to restore air
pressure as needed to fire remaining darts.
2.
3.
Clip may stop or slow down when dirt and lint
gather in clip rails and blaster channels. For
best performance, periodically wipe surfaces
clean with paper towel (not included).
✖ Do not stick target to walls or furniture as
it may cause damage to the surface.
Peel backing off target before sticking it to surface.
Y8620/BBY17
Replace time-worn targets and shields with
Y8620/BBY17 SMART STICK REFILLS.
Each sold separately, subject to availability.
3
TO FIRE
4
RESET
If rapid fire suddenly stops, try doing the following:
Dust, dirt, and other debris can cause darts and
rounds to lose their adhesiveness.
To clean them, rinse darts’ tips and rounds with
tap water or use tape to remove excess debris.
NOTE: Dry darts and rounds before using again.
IMPORTANT:
Always remove darts and rounds from target
after play. Keep one hand pressed on target,
gently peel round off or hold dart by the tip
and peel off.
OR
Pull trigger and release
quickly for single fire.
Pull and hold trigger for rapid fire.
B. To close shields.
A. Activate shields.
IMPORTANT INFORMATION
Read Carefully!
IMPORTANT INFORMATION
Read Carefully!
5
Pull rounds apart and stick
them back together!
Detach shields as desired. a
b
Click!
18x
TOP VIEW
ab
Click!
Align to blaster
as shown.
RESET BUTTON
a
b

A. Fully load clip with darts.
PERFORMANCE TIPS
3
2
CAUTION: Do not aim at eyes or face.
TO AVOID INJURY: Use only darts
designed for this product.
Do not modify rounds, darts, or dart blaster.
Please keep these instructions for future reference as they contain important information.
GAUNTLET
INSTRUCTIONS
CONTENTS
1
SHIELDS
2
ATTACHING TARGETS
6
CLEANING DARTS
& ROUNDS
8
REPLACING TARGETS
& SHIELDS
9
1
4
WARNING: Do not aim at eyes or face. Only use
projectiles supplied with this toy.
Do not fire at point blank range.
Always wear appropriate eye-wear,
sold separately.
x 30
INSTRUCTION SHEET
SPECIFICATIONS
Toy:
Toy No.:
Part No.:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
DATE:
REV. DATE:
CGN78
RAPID MADNESS W/ ROUND
0920
A4
A5
70 gsm
One
black
FSC recycled paper
02.20.14
02.21.14
REMOVING DARTS
& ROUNDS
7
©2014 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations
1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty.,
Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World
Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, 13th
Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Malaysia. Tel:[phone], Fax:[phone].
CGN78-0920
B. Insert the fully loaded clip from the left
side of the blaster with the arrowheads
pointing right.
Pump sliding handle all the way forward and all the
way back up to 18 times for maximum fire power.
C.
D.
A.
Remove empty clip from blaster. B. Press and hold RESET button and
trigger to release all air from blaster.
IMPORTANT:
Release all air from
blaster when not in use.
Check if there are empty slots in the clip. Press and release RESET button and pull trigger to advance
clip one slot. At last empty slot, press and release RESET button and pull trigger to fire blaster.
1.
Pump sliding handle again to restore air
pressure as needed to fire remaining darts.
2.
3.
Clip may stop or slow down when dirt and lint
gather in clip rails and blaster channels. For
best performance, periodically wipe surfaces
clean with paper towel (not included).
✖ Do not stick target to walls or furniture as
it may cause damage to the surface.
Peel backing off target before sticking it to surface.
Y8620/BBY17
Replace time-worn targets and shields with
Y8620/BBY17 SMART STICK REFILLS.
Each sold separately, subject to availability.
3
TO FIRE
4
RESET
If rapid fire suddenly stops, try doing the following:
Dust, dirt, and other debris can cause darts and
rounds to lose their adhesiveness.
To clean them, rinse darts’ tips and rounds with
tap water or use tape to remove excess debris.
NOTE: Dry darts and rounds before using again.
IMPORTANT:
Always remove darts and rounds from target
after play. Keep one hand pressed on target,
gently peel round off or hold dart by the tip
and peel off.
OR
Pull trigger and release
quickly for single fire.
Pull and hold trigger for rapid fire.
B. To close shields.
A. Activate shields.
IMPORTANT INFORMATION
Read Carefully!
IMPORTANT INFORMATION
Read Carefully!
5
Pull rounds apart and stick
them back together!
Detach shields as desired. a
b
Click!
18x
TOP VIEW
ab
Click!
Align to blaster
as shown.
RESET BUTTON
a
b

A. Fully load clip with darts.
PERFORMANCE TIPS
3
2
CAUTION: Do not aim at eyes or face.
TO AVOID INJURY: Use only darts
designed for this product.
Do not modify rounds, darts, or dart blaster.
Please keep these instructions for future reference as they contain important information.
GAUNTLET
INSTRUCTIONS
CONTENTS
1
SHIELDS
2
ATTACHING TARGETS
6
CLEANING DARTS
& ROUNDS
8
REPLACING TARGETS
& SHIELDS
9
1
4
WARNING: Do not aim at eyes or face. Only use
projectiles supplied with this toy.
Do not fire at point blank range.
Always wear appropriate eye-wear,
sold separately.
x 30
INSTRUCTION SHEET
SPECIFICATIONS
Toy:
Toy No.:
Part No.:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
DATE:
REV. DATE:
CGN78
RAPID MADNESS W/ ROUND
0920
A4
A5
70 gsm
One
black
FSC recycled paper
02.20.14
02.21.14
REMOVING DARTS
& ROUNDS
7
©2014 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations
1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty.,
Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World
Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, 13th
Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Malaysia. Tel:[phone], Fax:[phone].
CGN78-0920
B. Insert the fully loaded clip from the left
side of the blaster with the arrowheads
pointing right.
Pump sliding handle all the way forward and all the
way back up to 18 times for maximum fire power.
C.
D.
A.
Remove empty clip from blaster. B. Press and hold RESET button and
trigger to release all air from blaster.
IMPORTANT:
Release all air from
blaster when not in use.
Check if there are empty slots in the clip. Press and release RESET button and pull trigger to advance
clip one slot. At last empty slot, press and release RESET button and pull trigger to fire blaster.
1.
Pump sliding handle again to restore air
pressure as needed to fire remaining darts.
2.
3.
Clip may stop or slow down when dirt and lint
gather in clip rails and blaster channels. For
best performance, periodically wipe surfaces
clean with paper towel (not included).
✖ Do not stick target to walls or furniture as
it may cause damage to the surface.
Peel backing off target before sticking it to surface.
Y8620/BBY17
Replace time-worn targets and shields with
Y8620/BBY17 SMART STICK REFILLS.
Each sold separately, subject to availability.
3
TO FIRE
4
RESET
If rapid fire suddenly stops, try doing the following:
Dust, dirt, and other debris can cause darts and
rounds to lose their adhesiveness.
To clean them, rinse darts’ tips and rounds with
tap water or use tape to remove excess debris.
NOTE: Dry darts and rounds before using again.
IMPORTANT:
Always remove darts and rounds from target
after play. Keep one hand pressed on target,
gently peel round off or hold dart by the tip
and peel off.
OR
Pull trigger and release
quickly for single fire.
Pull and hold trigger for rapid fire.
B. To close shields.
A. Activate shields.
IMPORTANT INFORMATION
Read Carefully!
IMPORTANT INFORMATION
Read Carefully!
5
Pull rounds apart and stick
them back together!
Detach shields as desired. a
b
Click!
18x
TOP VIEW
ab
Click!
Align to blaster
as shown.
RESET BUTTON
a
b

A. Fully load clip with darts.
PERFORMANCE TIPS
3
2
CAUTION: Do not aim at eyes or face.
TO AVOID INJURY: Use only darts
designed for this product.
Do not modify rounds, darts, or dart blaster.
Please keep these instructions for future reference as they contain important information.
GAUNTLET
INSTRUCTIONS
CONTENTS
1
SHIELDS
2
ATTACHING TARGETS
6
CLEANING DARTS
& ROUNDS
8
REPLACING TARGETS
& SHIELDS
9
1
4
WARNING: Do not aim at eyes or face. Only use
projectiles supplied with this toy.
Do not fire at point blank range.
Always wear appropriate eye-wear,
sold separately.
x 30
INSTRUCTION SHEET
SPECIFICATIONS
Toy:
Toy No.:
Part No.:
Trim Size:
Folded Size:
Type of Fold:
# colors:
Colors:
Paper Stock:
Paper Weight:
EDM No.:
DATE:
REV. DATE:
CGN78
RAPID MADNESS W/ ROUND
0920
A4
A5
70 gsm
One
black
FSC recycled paper
02.20.14
02.21.14
REMOVING DARTS
& ROUNDS
7
©2014 Mattel. All Rights Reserved. Mattel, Inc., 636 Girard Avenue, East Aurora, NY 14052, U.S.A. Consumer Relations
1-800-524-8697. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628 500303. Mattel Australia Pty.,
Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd., Room 503-09, North Tower, World
Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 13.5, 13th
Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Malaysia. Tel:[phone], Fax:[phone].
CGN78-0920
B. Insert the fully loaded clip from the left
side of the blaster with the arrowheads
pointing right.
Pump sliding handle all the way forward and all the
way back up to 18 times for maximum fire power.
C.
D.
A.
Remove empty clip from blaster. B. Press and hold RESET button and
trigger to release all air from blaster.
IMPORTANT:
Release all air from
blaster when not in use.
Check if there are empty slots in the clip. Press and release RESET button and pull trigger to advance
clip one slot. At last empty slot, press and release RESET button and pull trigger to fire blaster.
1.
Pump sliding handle again to restore air
pressure as needed to fire remaining darts.
2.
3.
Clip may stop or slow down when dirt and lint
gather in clip rails and blaster channels. For
best performance, periodically wipe surfaces
clean with paper towel (not included).
✖ Do not stick target to walls or furniture as
it may cause damage to the surface.
Peel backing off target before sticking it to surface.
Y8620/BBY17
Replace time-worn targets and shields with
Y8620/BBY17 SMART STICK REFILLS.
Each sold separately, subject to availability.
3
TO FIRE
4
RESET
If rapid fire suddenly stops, try doing the following:
Dust, dirt, and other debris can cause darts and
rounds to lose their adhesiveness.
To clean them, rinse darts’ tips and rounds with
tap water or use tape to remove excess debris.
NOTE: Dry darts and rounds before using again.
IMPORTANT:
Always remove darts and rounds from target
after play. Keep one hand pressed on target,
gently peel round off or hold dart by the tip
and peel off.
OR
Pull trigger and release
quickly for single fire.
Pull and hold trigger for rapid fire.
B. To close shields.
A. Activate shields.
IMPORTANT INFORMATION
Read Carefully!
IMPORTANT INFORMATION
Read Carefully!
5
Pull rounds apart and stick
them back together!
Detach shields as desired. a
b
Click!
18x
TOP VIEW
ab
Click!
Align to blaster
as shown.
RESET BUTTON
a
b