Maxell MPC-CD6V User manual

Alkaline battery charger MPC-CD6V Instruction Manual
■Instruction Manual
Thank you for purchasing this MAXELL product. Before use, make sure to
read this Instruction Manual and use the product correctly and safely.
■Compatible models
The product is compatible to smartphone models that charge using USB
Micro-B or USB type-C connecter.
※ The product cannot be used for
models that charge using connectors of other shapes, or devices with a
battery capacity equal to or higher than the tablet.
■How to use
・How to charge your smartphone
① Connect the supplied cable to the main unit.
②Charging will start when the product is connected to the smartphone
charging connector.
※It is not possible to charge a smartphone with a USB Micro-B connector
and a smartphone with a USB Type-C connector at the same time.
※iPhone can be charged with a genuine Apple cable.
Plugging the cable into the charger will reduce the battery level, so be
sure to disconnect the cable after use.
▲Charger body
▲USB Type-C
connector
smartphone
USB-A Connector
USB Micro-B
Connector
USBType-C
Connector
LED
For Micro-B Connector
For Type-C Connector
Supplied Cable▶
Supplied Cable▶
▲Charger body USB-A Connector
Do not use.
USB Micro-B
Connector
LED
The product can be used
repeatedly by replacing the
batteries. If the LED indicator
that indicate the energization
state does not light even after
connecting the supplied cable or
genuine Apple cable, please
replace the batteries according
to the following procedure.
■Battery replacement
procedure
■
About the user manual
• Contents of this user manual might be changed in the future without
prior notice. • For product improvement, change of appearance or
specication might not be announced in advance. • Except for personal
use, any unauthorized copying of part or all parts of this manual is
prohibited. Unauthorized republication is strictly prohibited.
・
The names,
logos and service marks are registered trademarks or trademarks of
Maxell or other companies.
Disclaimer
(Please refer to the warranty page for warranty details)
• Maxell shall not be responsible for any damage caused by res,
earthquakes, action of a third party, any accidents, intended or
unintended misuse or other usage under abnormal conditions. • All
explicit and implicit contents not stated in the warranty card are not
covered. • Maxell shall not be responsible for failure due to any damage
caused by usage other than described in the instruction manual. • Maxell
shall not be responsible for any loss resulted from malfunction when
connecting to interconnecting devices. • This product is not being
designed to be any equipment or device which could be concerned with
human life such as medical device, nuclear device, astronomic device,
transportation device etc., nor equipment or devices which requires high
reliability. In case this product is used for the above equipment and/or
systems, Maxell do not responsible for any injuries or re accident cause
by the failure of this product.
Introduction
Check the orientation and
connect securely.
▲USB Micro-B
connector
smartphone
■ Warning (safety precautions)
˙Do not modify or disassemble the product, otherwise, re, electric
shock or failure may occur.・ Do not drop it, soak it in water, or heat it,
otherwise, accident may occur. • Do not place the product with the cable
connected in an enclosed area such as a bag, pocket or bed etc. • Do not
store the product in places subject to high temperatures, such as in a car
in hot weather or in direct sunlight. • Do not handle the product with wet
hands or use it around the water. • Before connecting the product, check
that there are no residues such as liquid, dirt or dust on the connector of
the smartphone. Failure to do so may cause short circuit, overheating or
re. • If you encounter any overheating, strange odours, or deformation
while using this product, please immediately stop using it. • Only use AA
alkaline batteries. Furthermore, do not mix new and used batteries or
dierent brands batteries. Doing so may cause leakage of batteries. •If the
product will not be used for a long time, remove the batteries and store it.
• Store it out of the reach of children so that they do not tamper with it. •
Do not use the product for purposes other than charging the compatible
products.

When replacing batteries, use new AA alkaline batteries and replace all 6
batteries at the same time. Make sure the + and – terminals are oriented
correctly when inserting the batteries.
■Precautions for use
• It cannot be used if the power does not turn on at all even if
pressed and holding the power button on the smartphone.
・ The
supplied cable (Micro-B and Type-C) is designed exclusively, so be
sure to use the supplied cables. Connecting with other cable may
cause malfunction. • When connecting, be sure to check the
orientation of the connector. If the orientation is correct, it will
connect smoothly. Forcible connection may cause an accident or
malfunction. • Be sure to hold the housing when connecting or
disconnecting the connector. Pulling the cable may cause
malfunction. • Do not use USB Micro-B and USB Type-C connectors
that have been bent. The inside of the connector may be deformed,
causing short circuit to overheat or cause re. • Do not charge a
device for more than 2 hours continuously. The smartphone
battery may discharge and the power may not turn on. • Use the
smartphone with the battery installed. • Do not use during system
update.
・ If the smartphone’s charge level does not increase after
charging, please turn o the power and restart it. • Before using the
product, please back up the memories, such as the phonebook,
image data, music data. We shall not be liable for any incidental
compensation for damages resulting from loss of various memory
or loss of communication opportunity due to factors such as
product failure or malfunction. Please note before use. • If the
payment function (Osaifu-Keitai) becomes unusable, we shall not
be able to take any responsibility. • The illustrations of the product
and accessories described in “How to use”in this manual may dier
slightly from the actual products. Thank you for your understanding.
Main Unit
Dimensions：W63×H108×T18.4mm
Output(USB-A)：DC5V / Max1A
Weight：Approx. 49g（excluding battery and cable）
Operating temperature range：5～35˚C
Storage temperature range：0～40˚C
Accessories
Charging Cable：USB-A ーMicro-B+Type-C approx. 100cm
AA Alkaline battery：Maxell LR6(T)/1.5V
■Specifications
PA1721-00
Maxell,Ltd.
30-13 Motoyoyogi-Cho, Shibuya-Ku, Tokyo 151-8527
①Make sure that the cable is not
connected.②Slide the battery cover
and remove it.③Remove the old
batteries and insert new batteries.④
Attach the battery cover.
Recommended batteries for device
charging: Maxell AA alkaline
battery
※ When closing, insert the battery cover into the main unit until it clicks.