Maxell MXH-BTW1000 User manual
MXH
-
BTW1000
3
4
Name of Each Part
018
-
190 059
D19
-
0008018
Wireless Earphone
Bluetooth®
1
2
1. Place the main units into the charging case. Align the L and R display
of the main units to the corresponding indication in the charging
case for charging.
2. The indicator LED on the main units turn red and charging starts. The
indicator LED on the charging case shows an indication of the battery
level.
3. Charging is completed when the indicator lights on the main units go
out. (Charging time: approx. 2 hours)
2. Charging of the charging case starts and indicator LED ashes.
3. Charging is completed when the indicator LED turns o. (Charging
time: about 3.5 hrs)
4. Remove the charging USB cable.
Charging Cable
AC adaptor
Charging
（flash）
Charging
completed
（Lightoff）
Main Unit (Lx1pc,Rx1pc)
Charging Case
(USB-A−Micro-Bapprox.45cm)x1pc
※Please do not use other cables except attached cable for charging.
※Connect the charging cable after checking the terminal direction carefully. If you
connect incorrectly, the terminals may be damaged.
※Please use 5V DC power supply based on USB standard for a USB port.
※If the battery is not used for a long period of time, charge it at least every 6 months.
Self-discharge may cause complete discharge and may become unable to charge.
※Lithium ion battery is a consumable item. The usage time will reduce with use. If the
usage time becomes extremely short, it indicates the end of battery life.
※It cannot be operated while charging.
※When the battery level of the main units become low, the guidance sound "battery
low" will be announced from the unit.
Microphone
Charging Case’s terminal
for charging
<Charging the charging case>
<Charging the main units>
Connection diagram
Battery Case
■
Thank you for purchasing this MAXELL product. Before use, make
sure to read this Instruction Manual and use the product correctly
and safely.
Earpieces (XS/S/M/L 2 units each)
* M is attached to the main unit
Contents of the package
Even while walking, using it in where it will be dangerous if
surrounding sounds cannot be heard (such as railway crossings,
crosswalks, station platforms, roadways, construction sites, etc.)
can cause unexpected serious accidents.
Please make sure that small children will not swallow it by accident
Incaseofaccident,seekmedicalattentionimmediately.
The surface of equipment and parts may deteriorate, result in
causing fire. Please take extra care in closed automobile in summer,
or it is under direct sunlight or near a stove.
Radio waves may affect cardiac pacemakers and medical equipment.
Please do not use in areas where use of wireless equipment is
prohibited such as in hospitals or priority seat of trains etc.
May cause traffic accident as hard to hear surroundings.
*2: Minor injury refers to hurt, burnt, electric shock, etc. which do not result
in hospitalization or long-term follow-up consultation.
*3: Property damage refers broad damages to houses or properties and
domestic animals/ pets.
*1: Severe injury is indicated by those that have after effects such as
blindness, injury, burns (high temperature burns/low temperature burns,
chemical burns), electric shock, fracture, poisoning, etc. and those
requiring hospitalization or long-term regular hospital visits for treatment.
stands for caution to fire, explosion, high temperature
when handling the product. Details will be illustrated
inside the symbol.
stands for prohibited actions when handling the product.
Details will be illustrated inside or next to the symbol or
with written description next to it.
stands for instruction which must be followed. Details
will be illustrated inside or next to the symbol or with
written description next to it.
Examples of
Symbol
Danger
Warning
When charging, please use USB port of computer etc. or USB adapter.
Using other power exceeding USB rating may result in heat
generation, ignition, failure, electric shock or injury.
Please do not touch the leaked liquid. If liquid leaks from this device
and gets into the eye, do not rub. Rinse with plenty of clean water
immediately and consult a doctor. It may cause blindness.
This may result in heat generation, ignition, breakage, leakage.
If smoke or strange smell or sounds comes out, or water or foreign
object gets inside, or the product is dropped, please turn off the
power immediately. Furthermore, if it is being charged via USB,
unplug the USB connection. Continued usage may cause heat
generation, ignition, malfunction, electric shock, etc.
This may cause fire or electric shock.
Fire, electric shock, injury may occur.
Please strictly follow
Danger
Warning
Caution
If it is handled incorrectly, the user may suffer
death or severe injury*1 and the urgency is high.
If it is handled incorrectly, it is assumed that
the user may suffer death or serious injury*1.
If it is handled incorrectly, it is assumed that the user
may suffer minor injury*2 or there is a possibility that
property damage*3 may occur.”
Safety Caution
Introduction
Disclaimer
●
●
Maxell shall not be responsible for any damage caused by fires,
earthquakes, action of a third party, any accidents, intended or unintended
misuse or other usage under abnormal conditions.
This Instruction Manual may be subject to change without prior notice.
In order to improve the product, external appearance or part of the
specifications may be subject to change without prior notice.
Maxell shall not be responsible for failure due to any damage caused by
usage other than described in the instruction manual.
This product is Japanese specification. We assume no responsibility if use
outside Japan.
About the user manual
This product is not being designed to be any equipment or device which
could be concerned with human life such as medical device, nuclear device,
astronomical device, transportation device etc., nor equipment or devices
which requires high reliability. In case this product is used for the above
equipment and/ or systems, Maxell do not responsible for any injuries or fire
accident cause by the failure of this product.
Charging Cable
Quick Start
Guide
User Manual
(This
Document)
It may cause leakage, overheating, fire or breakage.
Continuously listening to loud volume can result in overstimulation
of ears for an extended period of time. It may affect the hearing.
Furthermore, if the volume is raised too much from the beginning,
the sudden loud sounds may harm ears. Before using, please reduce
the volume of the connected device.
~
Continued usage may cause irritation or rash.
If you feel an abnormality, please discontinue use and seek medical
attention.
It may hurt your ear hole.
Charging and using at temperatures outside this range may cause
leakage, overheating, breakage, or malfunction.
Please remove dust and dirt regularly. Otherwise it may cause
overheating or fire.
Caution
station for moving object identification from the device,
immediately change the location of use or stop the emission of
radio waves.
In addition, when any troubles arise such as radio interference to
a specific low-power radio station or an amateur radio station for
moving object identification from this unit happened, please
contact our company’s "Customer Service Center”.
This unit is certified as a low-power data communication system
based on the Radio Law. Therefore, you do not need a wireless
station license to use this machine. However, it is prohibited to
disassemble, remodel or erase the certification making on the
product.
Please do not use in areas where use of mobile phone and
wireless equipment is prohibited such as in hospitals or priority
seat of trains etc.
Note on wireless use
This device uses 2.4 GHz frequency band. This frequency band is also
used by internal radio stations (radio stations that requires a license),
specific low-power radio stations (radio stations that do not require a
license) and amateur radio stations (radio stations that requires a
license) for moving object identification that are used in industrial,
scientific, and medical equipment such as microwave ovens as well as
factory manufacturing lines.
Before using this device, make sure that any internal radio station,
any specific low power radio station or any amateur radio station
for moving object identification are not operated nearby.
In the unlikely event of radio interference to an internal radio
1.
2.
3.
4.
5.
This radio equipment uses the 2.4 GHz band.
The FHSS modulation method is adopted as
the modulation method, and the interference
distance is 10 m.
Main Unit
Multi Button
Indicator LED
Indicator LED Micro USB terminal
for charging (back)
Earpiece
USB port of PC
Back
Front
Preparation
This product has a built-in lithium ion battery. After purchase,
please charge before use.
1. Connect the supplied charging USB cable to the charging case.
and to the USB port of PC or USB adapter.
MXH
-
BTW1000
3
4
Name of Each Part
018
-
190 059
D19
-
0008018
Wireless Earphone
Bluetooth®
1
2
1. Place the main units into the charging case. Align the L and R display
of the main units to the corresponding indication in the charging
case for charging.
2. The indicator LED on the main units turn red and charging starts. The
indicator LED on the charging case shows an indication of the battery
level.
3. Charging is completed when the indicator lights on the main units go
out. (Charging time: approx. 2 hours)
2. Charging of the charging case starts and indicator LED ashes.
3. Charging is completed when the indicator LED turns o. (Charging
time: about 3.5 hrs)
4. Remove the charging USB cable.
Charging Cable
AC adaptor
Charging
（flash）
Charging
completed
（Lightoff）
Main Unit (Lx1pc,Rx1pc)
Charging Case
(USB-A−Micro-Bapprox.45cm)x1pc
※Please do not use other cables except attached cable for charging.
※Connect the charging cable after checking the terminal direction carefully. If you
connect incorrectly, the terminals may be damaged.
※Please use 5V DC power supply based on USB standard for a USB port.
※If the battery is not used for a long period of time, charge it at least every 6 months.
Self-discharge may cause complete discharge and may become unable to charge.
※Lithium ion battery is a consumable item. The usage time will reduce with use. If the
usage time becomes extremely short, it indicates the end of battery life.
※It cannot be operated while charging.
※When the battery level of the main units become low, the guidance sound "battery
low" will be announced from the unit.
Microphone
Charging Case’s terminal
for charging
<Charging the charging case>
<Charging the main units>
Connection diagram
Battery Case
■
Thank you for purchasing this MAXELL product. Before use, make
sure to read this Instruction Manual and use the product correctly
and safely.
Earpieces (XS/S/M/L 2 units each)
* M is attached to the main unit
Contents of the package
Even while walking, using it in where it will be dangerous if
surrounding sounds cannot be heard (such as railway crossings,
crosswalks, station platforms, roadways, construction sites, etc.)
can cause unexpected serious accidents.
Please make sure that small children will not swallow it by accident
Incaseofaccident,seekmedicalattentionimmediately.
The surface of equipment and parts may deteriorate, result in
causing fire. Please take extra care in closed automobile in summer,
or it is under direct sunlight or near a stove.
Radio waves may affect cardiac pacemakers and medical equipment.
Please do not use in areas where use of wireless equipment is
prohibited such as in hospitals or priority seat of trains etc.
May cause traffic accident as hard to hear surroundings.
*2: Minor injury refers to hurt, burnt, electric shock, etc. which do not result
in hospitalization or long-term follow-up consultation.
*3: Property damage refers broad damages to houses or properties and
domestic animals/ pets.
*1: Severe injury is indicated by those that have after effects such as
blindness, injury, burns (high temperature burns/low temperature burns,
chemical burns), electric shock, fracture, poisoning, etc. and those
requiring hospitalization or long-term regular hospital visits for treatment.
stands for caution to fire, explosion, high temperature
when handling the product. Details will be illustrated
inside the symbol.
stands for prohibited actions when handling the product.
Details will be illustrated inside or next to the symbol or
with written description next to it.
stands for instruction which must be followed. Details
will be illustrated inside or next to the symbol or with
written description next to it.
Examples of
Symbol
Danger
Warning
When charging, please use USB port of computer etc. or USB adapter.
Using other power exceeding USB rating may result in heat
generation, ignition, failure, electric shock or injury.
Please do not touch the leaked liquid. If liquid leaks from this device
and gets into the eye, do not rub. Rinse with plenty of clean water
immediately and consult a doctor. It may cause blindness.
This may result in heat generation, ignition, breakage, leakage.
If smoke or strange smell or sounds comes out, or water or foreign
object gets inside, or the product is dropped, please turn off the
power immediately. Furthermore, if it is being charged via USB,
unplug the USB connection. Continued usage may cause heat
generation, ignition, malfunction, electric shock, etc.
This may cause fire or electric shock.
Fire, electric shock, injury may occur.
Please strictly follow
Danger
Warning
Caution
If it is handled incorrectly, the user may suffer
death or severe injury*1 and the urgency is high.
If it is handled incorrectly, it is assumed that
the user may suffer death or serious injury*1.
If it is handled incorrectly, it is assumed that the user
may suffer minor injury*2 or there is a possibility that
property damage*3 may occur.”
Safety Caution
Introduction
Disclaimer
●
●
Maxell shall not be responsible for any damage caused by fires,
earthquakes, action of a third party, any accidents, intended or unintended
misuse or other usage under abnormal conditions.
This Instruction Manual may be subject to change without prior notice.
In order to improve the product, external appearance or part of the
specifications may be subject to change without prior notice.
Maxell shall not be responsible for failure due to any damage caused by
usage other than described in the instruction manual.
This product is Japanese specification. We assume no responsibility if use
outside Japan.
About the user manual
This product is not being designed to be any equipment or device which
could be concerned with human life such as medical device, nuclear device,
astronomical device, transportation device etc., nor equipment or devices
which requires high reliability. In case this product is used for the above
equipment and/ or systems, Maxell do not responsible for any injuries or fire
accident cause by the failure of this product.
Charging Cable
Quick Start
Guide
User Manual
(This
Document)
It may cause leakage, overheating, fire or breakage.
Continuously listening to loud volume can result in overstimulation
of ears for an extended period of time. It may affect the hearing.
Furthermore, if the volume is raised too much from the beginning,
the sudden loud sounds may harm ears. Before using, please reduce
the volume of the connected device.
~
Continued usage may cause irritation or rash.
If you feel an abnormality, please discontinue use and seek medical
attention.
It may hurt your ear hole.
Charging and using at temperatures outside this range may cause
leakage, overheating, breakage, or malfunction.
Please remove dust and dirt regularly. Otherwise it may cause
overheating or fire.
Caution
station for moving object identification from the device,
immediately change the location of use or stop the emission of
radio waves.
In addition, when any troubles arise such as radio interference to
a specific low-power radio station or an amateur radio station for
moving object identification from this unit happened, please
contact our company’s "Customer Service Center”.
This unit is certified as a low-power data communication system
based on the Radio Law. Therefore, you do not need a wireless
station license to use this machine. However, it is prohibited to
disassemble, remodel or erase the certification making on the
product.
Please do not use in areas where use of mobile phone and
wireless equipment is prohibited such as in hospitals or priority
seat of trains etc.
Note on wireless use
This device uses 2.4 GHz frequency band. This frequency band is also
used by internal radio stations (radio stations that requires a license),
specific low-power radio stations (radio stations that do not require a
license) and amateur radio stations (radio stations that requires a
license) for moving object identification that are used in industrial,
scientific, and medical equipment such as microwave ovens as well as
factory manufacturing lines.
Before using this device, make sure that any internal radio station,
any specific low power radio station or any amateur radio station
for moving object identification are not operated nearby.
In the unlikely event of radio interference to an internal radio
1.
2.
3.
4.
5.
This radio equipment uses the 2.4 GHz band.
The FHSS modulation method is adopted as
the modulation method, and the interference
distance is 10 m.
Main Unit
Multi Button
Indicator LED
Indicator LED Micro USB terminal
for charging (back)
Earpiece
USB port of PC
Back
Front
Preparation
This product has a built-in lithium ion battery. After purchase,
please charge before use.
1. Connect the supplied charging USB cable to the charging case.
and to the USB port of PC or USB adapter.
MXH
-
BTW1000
3
4
Name of Each Part
018
-
190 059
D19
-
0008018
Wireless Earphone
Bluetooth®
1
2
1. Place the main units into the charging case. Align the L and R display
of the main units to the corresponding indication in the charging
case for charging.
2. The indicator LED on the main units turn red and charging starts. The
indicator LED on the charging case shows an indication of the battery
level.
3. Charging is completed when the indicator lights on the main units go
out. (Charging time: approx. 2 hours)
2. Charging of the charging case starts and indicator LED ashes.
3. Charging is completed when the indicator LED turns o. (Charging
time: about 3.5 hrs)
4. Remove the charging USB cable.
Charging Cable
AC adaptor
Charging
（flash）
Charging
completed
（Lightoff）
Main Unit (Lx1pc,Rx1pc)
Charging Case
(USB-A−Micro-Bapprox.45cm)x1pc
※Please do not use other cables except attached cable for charging.
※Connect the charging cable after checking the terminal direction carefully. If you
connect incorrectly, the terminals may be damaged.
※Please use 5V DC power supply based on USB standard for a USB port.
※If the battery is not used for a long period of time, charge it at least every 6 months.
Self-discharge may cause complete discharge and may become unable to charge.
※Lithium ion battery is a consumable item. The usage time will reduce with use. If the
usage time becomes extremely short, it indicates the end of battery life.
※It cannot be operated while charging.
※When the battery level of the main units become low, the guidance sound "battery
low" will be announced from the unit.
Microphone
Charging Case’s terminal
for charging
<Charging the charging case>
<Charging the main units>
Connection diagram
Battery Case
■
Thank you for purchasing this MAXELL product. Before use, make
sure to read this Instruction Manual and use the product correctly
and safely.
Earpieces (XS/S/M/L 2 units each)
* M is attached to the main unit
Contents of the package
Even while walking, using it in where it will be dangerous if
surrounding sounds cannot be heard (such as railway crossings,
crosswalks, station platforms, roadways, construction sites, etc.)
can cause unexpected serious accidents.
Please make sure that small children will not swallow it by accident
Incaseofaccident,seekmedicalattentionimmediately.
The surface of equipment and parts may deteriorate, result in
causing fire. Please take extra care in closed automobile in summer,
or it is under direct sunlight or near a stove.
Radio waves may affect cardiac pacemakers and medical equipment.
Please do not use in areas where use of wireless equipment is
prohibited such as in hospitals or priority seat of trains etc.
May cause traffic accident as hard to hear surroundings.
*2: Minor injury refers to hurt, burnt, electric shock, etc. which do not result
in hospitalization or long-term follow-up consultation.
*3: Property damage refers broad damages to houses or properties and
domestic animals/ pets.
*1: Severe injury is indicated by those that have after effects such as
blindness, injury, burns (high temperature burns/low temperature burns,
chemical burns), electric shock, fracture, poisoning, etc. and those
requiring hospitalization or long-term regular hospital visits for treatment.
stands for caution to fire, explosion, high temperature
when handling the product. Details will be illustrated
inside the symbol.
stands for prohibited actions when handling the product.
Details will be illustrated inside or next to the symbol or
with written description next to it.
stands for instruction which must be followed. Details
will be illustrated inside or next to the symbol or with
written description next to it.
Examples of
Symbol
Danger
Warning
When charging, please use USB port of computer etc. or USB adapter.
Using other power exceeding USB rating may result in heat
generation, ignition, failure, electric shock or injury.
Please do not touch the leaked liquid. If liquid leaks from this device
and gets into the eye, do not rub. Rinse with plenty of clean water
immediately and consult a doctor. It may cause blindness.
This may result in heat generation, ignition, breakage, leakage.
If smoke or strange smell or sounds comes out, or water or foreign
object gets inside, or the product is dropped, please turn off the
power immediately. Furthermore, if it is being charged via USB,
unplug the USB connection. Continued usage may cause heat
generation, ignition, malfunction, electric shock, etc.
This may cause fire or electric shock.
Fire, electric shock, injury may occur.
Please strictly follow
Danger
Warning
Caution
If it is handled incorrectly, the user may suffer
death or severe injury*1 and the urgency is high.
If it is handled incorrectly, it is assumed that
the user may suffer death or serious injury*1.
If it is handled incorrectly, it is assumed that the user
may suffer minor injury*2 or there is a possibility that
property damage*3 may occur.”
Safety Caution
Introduction
Disclaimer
●
●
Maxell shall not be responsible for any damage caused by fires,
earthquakes, action of a third party, any accidents, intended or unintended
misuse or other usage under abnormal conditions.
This Instruction Manual may be subject to change without prior notice.
In order to improve the product, external appearance or part of the
specifications may be subject to change without prior notice.
Maxell shall not be responsible for failure due to any damage caused by
usage other than described in the instruction manual.
This product is Japanese specification. We assume no responsibility if use
outside Japan.
About the user manual
This product is not being designed to be any equipment or device which
could be concerned with human life such as medical device, nuclear device,
astronomical device, transportation device etc., nor equipment or devices
which requires high reliability. In case this product is used for the above
equipment and/ or systems, Maxell do not responsible for any injuries or fire
accident cause by the failure of this product.
Charging Cable
Quick Start
Guide
User Manual
(This
Document)
It may cause leakage, overheating, fire or breakage.
Continuously listening to loud volume can result in overstimulation
of ears for an extended period of time. It may affect the hearing.
Furthermore, if the volume is raised too much from the beginning,
the sudden loud sounds may harm ears. Before using, please reduce
the volume of the connected device.
~
Continued usage may cause irritation or rash.
If you feel an abnormality, please discontinue use and seek medical
attention.
It may hurt your ear hole.
Charging and using at temperatures outside this range may cause
leakage, overheating, breakage, or malfunction.
Please remove dust and dirt regularly. Otherwise it may cause
overheating or fire.
Caution
station for moving object identification from the device,
immediately change the location of use or stop the emission of
radio waves.
In addition, when any troubles arise such as radio interference to
a specific low-power radio station or an amateur radio station for
moving object identification from this unit happened, please
contact our company’s "Customer Service Center”.
This unit is certified as a low-power data communication system
based on the Radio Law. Therefore, you do not need a wireless
station license to use this machine. However, it is prohibited to
disassemble, remodel or erase the certification making on the
product.
Please do not use in areas where use of mobile phone and
wireless equipment is prohibited such as in hospitals or priority
seat of trains etc.
Note on wireless use
This device uses 2.4 GHz frequency band. This frequency band is also
used by internal radio stations (radio stations that requires a license),
specific low-power radio stations (radio stations that do not require a
license) and amateur radio stations (radio stations that requires a
license) for moving object identification that are used in industrial,
scientific, and medical equipment such as microwave ovens as well as
factory manufacturing lines.
Before using this device, make sure that any internal radio station,
any specific low power radio station or any amateur radio station
for moving object identification are not operated nearby.
In the unlikely event of radio interference to an internal radio
1.
2.
3.
4.
5.
This radio equipment uses the 2.4 GHz band.
The FHSS modulation method is adopted as
the modulation method, and the interference
distance is 10 m.
Main Unit
Multi Button
Indicator LED
Indicator LED Micro USB terminal
for charging (back)
Earpiece
USB port of PC
Back
Front
Preparation
This product has a built-in lithium ion battery. After purchase,
please charge before use.
1. Connect the supplied charging USB cable to the charging case.
and to the USB port of PC or USB adapter.
MXH
-
BTW1000
3
4
Name of Each Part
018
-
190 059
D19
-
0008018
Wireless Earphone
Bluetooth®
1
2
1. Place the main units into the charging case. Align the L and R display
of the main units to the corresponding indication in the charging
case for charging.
2. The indicator LED on the main units turn red and charging starts. The
indicator LED on the charging case shows an indication of the battery
level.
3. Charging is completed when the indicator lights on the main units go
out. (Charging time: approx. 2 hours)
2. Charging of the charging case starts and indicator LED ashes.
3. Charging is completed when the indicator LED turns o. (Charging
time: about 3.5 hrs)
4. Remove the charging USB cable.
Charging Cable
AC adaptor
Charging
（flash）
Charging
completed
（Lightoff）
Main Unit (Lx1pc,Rx1pc)
Charging Case
(USB-A−Micro-Bapprox.45cm)x1pc
※Please do not use other cables except attached cable for charging.
※Connect the charging cable after checking the terminal direction carefully. If you
connect incorrectly, the terminals may be damaged.
※Please use 5V DC power supply based on USB standard for a USB port.
※If the battery is not used for a long period of time, charge it at least every 6 months.
Self-discharge may cause complete discharge and may become unable to charge.
※Lithium ion battery is a consumable item. The usage time will reduce with use. If the
usage time becomes extremely short, it indicates the end of battery life.
※It cannot be operated while charging.
※When the battery level of the main units become low, the guidance sound "battery
low" will be announced from the unit.
Microphone
Charging Case’s terminal
for charging
<Charging the charging case>
<Charging the main units>
Connection diagram
Battery Case
■
Thank you for purchasing this MAXELL product. Before use, make
sure to read this Instruction Manual and use the product correctly
and safely.
Earpieces (XS/S/M/L 2 units each)
* M is attached to the main unit
Contents of the package
Even while walking, using it in where it will be dangerous if
surrounding sounds cannot be heard (such as railway crossings,
crosswalks, station platforms, roadways, construction sites, etc.)
can cause unexpected serious accidents.
Please make sure that small children will not swallow it by accident
Incaseofaccident,seekmedicalattentionimmediately.
The surface of equipment and parts may deteriorate, result in
causing fire. Please take extra care in closed automobile in summer,
or it is under direct sunlight or near a stove.
Radio waves may affect cardiac pacemakers and medical equipment.
Please do not use in areas where use of wireless equipment is
prohibited such as in hospitals or priority seat of trains etc.
May cause traffic accident as hard to hear surroundings.
*2: Minor injury refers to hurt, burnt, electric shock, etc. which do not result
in hospitalization or long-term follow-up consultation.
*3: Property damage refers broad damages to houses or properties and
domestic animals/ pets.
*1: Severe injury is indicated by those that have after effects such as
blindness, injury, burns (high temperature burns/low temperature burns,
chemical burns), electric shock, fracture, poisoning, etc. and those
requiring hospitalization or long-term regular hospital visits for treatment.
stands for caution to fire, explosion, high temperature
when handling the product. Details will be illustrated
inside the symbol.
stands for prohibited actions when handling the product.
Details will be illustrated inside or next to the symbol or
with written description next to it.
stands for instruction which must be followed. Details
will be illustrated inside or next to the symbol or with
written description next to it.
Examples of
Symbol
Danger
Warning
When charging, please use USB port of computer etc. or USB adapter.
Using other power exceeding USB rating may result in heat
generation, ignition, failure, electric shock or injury.
Please do not touch the leaked liquid. If liquid leaks from this device
and gets into the eye, do not rub. Rinse with plenty of clean water
immediately and consult a doctor. It may cause blindness.
This may result in heat generation, ignition, breakage, leakage.
If smoke or strange smell or sounds comes out, or water or foreign
object gets inside, or the product is dropped, please turn off the
power immediately. Furthermore, if it is being charged via USB,
unplug the USB connection. Continued usage may cause heat
generation, ignition, malfunction, electric shock, etc.
This may cause fire or electric shock.
Fire, electric shock, injury may occur.
Please strictly follow
Danger
Warning
Caution
If it is handled incorrectly, the user may suffer
death or severe injury*1 and the urgency is high.
If it is handled incorrectly, it is assumed that
the user may suffer death or serious injury*1.
If it is handled incorrectly, it is assumed that the user
may suffer minor injury*2 or there is a possibility that
property damage*3 may occur.”
Safety Caution
Introduction
Disclaimer
●
●
Maxell shall not be responsible for any damage caused by fires,
earthquakes, action of a third party, any accidents, intended or unintended
misuse or other usage under abnormal conditions.
This Instruction Manual may be subject to change without prior notice.
In order to improve the product, external appearance or part of the
specifications may be subject to change without prior notice.
Maxell shall not be responsible for failure due to any damage caused by
usage other than described in the instruction manual.
This product is Japanese specification. We assume no responsibility if use
outside Japan.
About the user manual
This product is not being designed to be any equipment or device which
could be concerned with human life such as medical device, nuclear device,
astronomical device, transportation device etc., nor equipment or devices
which requires high reliability. In case this product is used for the above
equipment and/ or systems, Maxell do not responsible for any injuries or fire
accident cause by the failure of this product.
Charging Cable
Quick Start
Guide
User Manual
(This
Document)
It may cause leakage, overheating, fire or breakage.
Continuously listening to loud volume can result in overstimulation
of ears for an extended period of time. It may affect the hearing.
Furthermore, if the volume is raised too much from the beginning,
the sudden loud sounds may harm ears. Before using, please reduce
the volume of the connected device.
~
Continued usage may cause irritation or rash.
If you feel an abnormality, please discontinue use and seek medical
attention.
It may hurt your ear hole.
Charging and using at temperatures outside this range may cause
leakage, overheating, breakage, or malfunction.
Please remove dust and dirt regularly. Otherwise it may cause
overheating or fire.
Caution
station for moving object identification from the device,
immediately change the location of use or stop the emission of
radio waves.
In addition, when any troubles arise such as radio interference to
a specific low-power radio station or an amateur radio station for
moving object identification from this unit happened, please
contact our company’s "Customer Service Center”.
This unit is certified as a low-power data communication system
based on the Radio Law. Therefore, you do not need a wireless
station license to use this machine. However, it is prohibited to
disassemble, remodel or erase the certification making on the
product.
Please do not use in areas where use of mobile phone and
wireless equipment is prohibited such as in hospitals or priority
seat of trains etc.
Note on wireless use
This device uses 2.4 GHz frequency band. This frequency band is also
used by internal radio stations (radio stations that requires a license),
specific low-power radio stations (radio stations that do not require a
license) and amateur radio stations (radio stations that requires a
license) for moving object identification that are used in industrial,
scientific, and medical equipment such as microwave ovens as well as
factory manufacturing lines.
Before using this device, make sure that any internal radio station,
any specific low power radio station or any amateur radio station
for moving object identification are not operated nearby.
In the unlikely event of radio interference to an internal radio
1.
2.
3.
4.
5.
This radio equipment uses the 2.4 GHz band.
The FHSS modulation method is adopted as
the modulation method, and the interference
distance is 10 m.
Main Unit
Multi Button
Indicator LED
Indicator LED Micro USB terminal
for charging (back)
Earpiece
USB port of PC
Back
Front
Preparation
This product has a built-in lithium ion battery. After purchase,
please charge before use.
1. Connect the supplied charging USB cable to the charging case.
and to the USB port of PC or USB adapter.
Specification
PA1375-00
6
7
*1: When pairing is performed for the
rst time after purchase, it will be in
paring mode immediately after the
power is turned on. When paring the
second device, it will be in pairing
mode approximately 30 seconds after
the power is turned on.
*1: When the main units and the charging case are fully charged, the playback time is a
maximum of 22 hours for a total of 4 times, where 1 time for the main units and 3 times for
charging from the charging case.
1.Press and hold the multi button on the main unit L or R for approximately 3
seconds to turn the power o.
2.Press and hold the multi buttons of the main units L and R for approximately
15 seconds, and release when the indicator LED ashes twice in purple.
3.Set the main units L and R in the charging case.
4.PleasecarryoutpairingaccordingtotheprocedureinHowtoUse
<Paringandconnecting>.
1. When the main units are removed from the charging case, the main
units’ power turns on automatically, and the indicator LED start
ashing.
2. Activate Bluetooth on your Bluetooth device.
3. The earphone will connect automatically.*2 After connect, the display
lamp will ash blue slowly.
If the problem does not improve, please reset the main units. When the main
units are reset, all paired device information is erased and it will be in the state
at the time of purchase. Please pair again.
5
Unable to
charge
Caution
· When the Bluetooth connection is not made and about 2 minutes elapses, the
power turns o automatically.
*4: If it does not connect automatically, please select "MXH-BTW1000" from the
list displayed on your Bluetooth device.
*2: If it does not connect automatically, please select "MXH-BTW1000" from the list
displayed on your Bluetooth device.
1. When the main units are removed from the charging case, the main
units’ power turns on automatically, and the indicator LED starts
ashing.
2. After a while, the LED of the main unit (L) starts to ash red and blue
alternately .* 1 The main unit (R) ashes in blue slowly.
3. Activate Bluetooth on your Bluetooth device.
*For details on setting, please refer to the instruction manual of the
device.
4. Please select "MXH-BTW1000" from the list displayed on your
Bluetooth device.
5. When pairing is completed, the blue indicator LED ashes slowly.
Caution
*3: Password may be called passcode, passkey, PIN code, etc.
●Pairing mode lasts for approximately 1 minute, and if it is not paired during
that time, it will become standby mode.
● Password*3 input may be requested by your Bluetooth device. In that case,
you can pair it by entering "0000".
●This product can simultaneously store up to 8 paired Bluetooth devices.
When more than 8 pairings are attempted, the information of the 1st
stored Bluetooth device is erased and is replaced by the newly paired
device. If you want to use a Bluetooth device whose information has been
erased, please pair it again.
Or, while the power is o, press
and hold the multi buttons on
the main unit L approximately
6 seconds
Power ON
Left Channel
Right Channel
Paring Mode
Remove the main units from
the charging case
Connected
Connected
Disconnected
Pairing
Mode
Main unit L: Blue
light ashes →
Blue light and
Red light ash
alternatively
Main unit R: Blue
light ashes
slowly
Main unit L:Blue
light ashes
main unit R:Blue
light ashes
slowly
Main unit LR:
Blue light ashes
slowly
Main unit LR:
Blue light ashes
slowly
Disconnect
Pairing
complete
Connect
Disconnect the product from
your device (or disable
Bluetooth)
Pair this product from your
Bluetooth device. Please refer
to <Pairing and connecting>
After pairing is completed,
automatically connects if
Bluetooth of your Bluetooth
device is enabled*4
Music Playback
Receiving a call
Ending a call Press the Multi Button on the main unit L or R during a call
The other party disconnects the call
Function Operation
*5: If the button is pressed at the beginning of the song, it will skip to the previous
song.
·Depending on your Bluetooth device, the operation may dier or may not be usable.
·Depending on your Bluetooth device, the operation may dier or may not be usable.
The power
does not
turn on
No sound
Sound is
distorted
or
interrupted
・Please reduce the volume of the connection device and this unit.
・Please turn o the functions such as bass boost of connection device.
・Remove any obstacles between the connection device and this unit.
・Keep the connection device close to this unit.
・Please keep away from radio equipment or microwave ovens.
Cannot hear
the voice on
the phone
・Please press the Multi Button to receive the call.
・Make sure that the Bluetooth device supports HFP or HSP.
Troubleshooting
・Insert the main units into the charging case and remove them
from the charging case.
・Press and hold down the Multi Button for about 3 seconds.
・Please charge the product.
・Please pair and connect Bluetooth.
・Power is not turned on. Press and hold the multi buttons for
approximately 3 seconds.
・Check to see if the connected device supports Bluetooth prole A2DP.
・Check if the Bluetooth device is playing.
・Please increase the volume of the Bluetooth device slowly.
・Insert the charging cable until the end of the charging terminal.
・Remove the main units from the charging case and place the main
units in again.
・Remove dirt from the main units and charging case contacts.
・Charge within the charge temperature range（5℃to 40℃） .
※Specications and appearances are subject to change without prior notice for improvement.
※This device has a lithium ion battery built in. Usage time and battery charging time are based
on our test results. It depends on the usage environment.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Maxell Asia, Ltd. is under license.
The names, logos, and service marks are registered trademarks and trade names of maxell
or their respective owners.
Maxell, Ltd.
30-13 Motoyoyogi-Cho, Shibuya-Ku, Tokyo 151-8527
Caution
Caution
■Hands free call
■
■
<Connection after the second time onward>
Common function
Or, while the power is o, press
and hold the multi buttons on
the main unit L and R for
approximately 3 seconds
Power On
Left Channel
Right Channel
Main Unit LR:
Light OFF
Main Unit LR:
Red light ON
Guidance
sound
Power On
Remove the main units from
the charging case Main Unit L:
Blue light ashes
Main Unit R:
Blue light ashes
slowly
Power OFF Power OFF
Place the main units into the
charging case
Or, press and hold the multi
button on the main unit L or R
for approximately 3 seconds
This operation cannot be done with this
product. Operate with the connected device
PLAY / PAUSE
Volume UP / DOWN
Function Operation
Next song (skip to the
next song)
Previous song (return to
the beginning of the
currently playing song*5)
Press the multi button on main unit L or R
twice in succession
Press the multi button on main unit L or R
three times in succession
Press the multi button on the
main unit L or R to operate play and pause
Display lampFunction Operation
<How to operate>
Press the Multi button on the main unit L or R when
receiving a call
<Pairing and connecting>
5How To Use
At the time of purchase, size M earpiece are attached to the main unit.
If size M does not fit your ears, please replace with the size XS, S or size L
earpiece in the contents.
If the earpiece does not fit correctly, it will not be possible to seal the
ear hole with the earpiece, which may cause sound leakage and no bass
to be heard. Also, if you feel that the volume is low, there is a possibility of
sound leakage.
<Choosing an earpiece>
Headphone
specication
Wireless
specication
Diameter 6mm
20~20,000Hz
Built-in rechargeable lithium ion battery
Continuous playback: approx.
5.5 hours, Continuous standby:
approx. 100 hours.
charging case charge main units for
approx. 3 times*1
Main Unit: Approx. 2 hours
Charging Case: Approx. 3.5 hours
Main Unit: Approx. 5g x 2
Charging Case: Approx. 45g
Max. 10m
Bluetooth® Ver.5.0
A2DP, AVRCP, HFP, HSP
SBC, AAC
Sealed dynamic type
SCMS-T
Max. up to 8 units
Earpieces (XS/S/M/L 2 units each)
※M size are attached to the main units.
Charging cable (USB A-Micro B approx.
45cm) x1, instruction manual, Quick start
guide
Driver unit
Model
Power supply
Duration
Charging time
Weight
Accessories
Communication
method
Communication
distance
Supported prole
Supported codecs
Supported content
protection
Multi-paring
Audio frequency
response
In order to use this product, it is necessary to pair with your
Bluetooth device. Once pairing is done, you can connect without
pairing again.
Specification
PA1375-00
6
7
*1: When pairing is performed for the
rst time after purchase, it will be in
paring mode immediately after the
power is turned on. When paring the
second device, it will be in pairing
mode approximately 30 seconds after
the power is turned on.
*1: When the main units and the charging case are fully charged, the playback time is a
maximum of 22 hours for a total of 4 times, where 1 time for the main units and 3 times for
charging from the charging case.
1.Press and hold the multi button on the main unit L or R for approximately 3
seconds to turn the power o.
2.Press and hold the multi buttons of the main units L and R for approximately
15 seconds, and release when the indicator LED ashes twice in purple.
3.Set the main units L and R in the charging case.
4.PleasecarryoutpairingaccordingtotheprocedureinHowtoUse
<Paringandconnecting>.
1. When the main units are removed from the charging case, the main
units’ power turns on automatically, and the indicator LED start
ashing.
2. Activate Bluetooth on your Bluetooth device.
3. The earphone will connect automatically.*2 After connect, the display
lamp will ash blue slowly.
If the problem does not improve, please reset the main units. When the main
units are reset, all paired device information is erased and it will be in the state
at the time of purchase. Please pair again.
5
Unable to
charge
Caution
· When the Bluetooth connection is not made and about 2 minutes elapses, the
power turns o automatically.
*4: If it does not connect automatically, please select "MXH-BTW1000" from the
list displayed on your Bluetooth device.
*2: If it does not connect automatically, please select "MXH-BTW1000" from the list
displayed on your Bluetooth device.
1. When the main units are removed from the charging case, the main
units’ power turns on automatically, and the indicator LED starts
ashing.
2. After a while, the LED of the main unit (L) starts to ash red and blue
alternately .* 1 The main unit (R) ashes in blue slowly.
3. Activate Bluetooth on your Bluetooth device.
*For details on setting, please refer to the instruction manual of the
device.
4. Please select "MXH-BTW1000" from the list displayed on your
Bluetooth device.
5. When pairing is completed, the blue indicator LED ashes slowly.
Caution
*3: Password may be called passcode, passkey, PIN code, etc.
●Pairing mode lasts for approximately 1 minute, and if it is not paired during
that time, it will become standby mode.
● Password*3 input may be requested by your Bluetooth device. In that case,
you can pair it by entering "0000".
●This product can simultaneously store up to 8 paired Bluetooth devices.
When more than 8 pairings are attempted, the information of the 1st
stored Bluetooth device is erased and is replaced by the newly paired
device. If you want to use a Bluetooth device whose information has been
erased, please pair it again.
Or, while the power is o, press
and hold the multi buttons on
the main unit L approximately
6 seconds
Power ON
Left Channel
Right Channel
Paring Mode
Remove the main units from
the charging case
Connected
Connected
Disconnected
Pairing
Mode
Main unit L: Blue
light ashes →
Blue light and
Red light ash
alternatively
Main unit R: Blue
light ashes
slowly
Main unit L:Blue
light ashes
main unit R:Blue
light ashes
slowly
Main unit LR:
Blue light ashes
slowly
Main unit LR:
Blue light ashes
slowly
Disconnect
Pairing
complete
Connect
Disconnect the product from
your device (or disable
Bluetooth)
Pair this product from your
Bluetooth device. Please refer
to <Pairing and connecting>
After pairing is completed,
automatically connects if
Bluetooth of your Bluetooth
device is enabled*4
Music Playback
Receiving a call
Ending a call Press the Multi Button on the main unit L or R during a call
The other party disconnects the call
Function Operation
*5: If the button is pressed at the beginning of the song, it will skip to the previous
song.
·Depending on your Bluetooth device, the operation may dier or may not be usable.
·Depending on your Bluetooth device, the operation may dier or may not be usable.
The power
does not
turn on
No sound
Sound is
distorted
or
interrupted
・Please reduce the volume of the connection device and this unit.
・Please turn o the functions such as bass boost of connection device.
・Remove any obstacles between the connection device and this unit.
・Keep the connection device close to this unit.
・Please keep away from radio equipment or microwave ovens.
Cannot hear
the voice on
the phone
・Please press the Multi Button to receive the call.
・Make sure that the Bluetooth device supports HFP or HSP.
Troubleshooting
・Insert the main units into the charging case and remove them
from the charging case.
・Press and hold down the Multi Button for about 3 seconds.
・Please charge the product.
・Please pair and connect Bluetooth.
・Power is not turned on. Press and hold the multi buttons for
approximately 3 seconds.
・Check to see if the connected device supports Bluetooth prole A2DP.
・Check if the Bluetooth device is playing.
・Please increase the volume of the Bluetooth device slowly.
・Insert the charging cable until the end of the charging terminal.
・Remove the main units from the charging case and place the main
units in again.
・Remove dirt from the main units and charging case contacts.
・Charge within the charge temperature range（5℃to 40℃） .
※Specications and appearances are subject to change without prior notice for improvement.
※This device has a lithium ion battery built in. Usage time and battery charging time are based
on our test results. It depends on the usage environment.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Maxell Asia, Ltd. is under license.
The names, logos, and service marks are registered trademarks and trade names of maxell
or their respective owners.
Maxell, Ltd.
30-13 Motoyoyogi-Cho, Shibuya-Ku, Tokyo 151-8527
Caution
Caution
■Hands free call
■
■
<Connection after the second time onward>
Common function
Or, while the power is o, press
and hold the multi buttons on
the main unit L and R for
approximately 3 seconds
Power On
Left Channel
Right Channel
Main Unit LR:
Light OFF
Main Unit LR:
Red light ON
Guidance
sound
Power On
Remove the main units from
the charging case Main Unit L:
Blue light ashes
Main Unit R:
Blue light ashes
slowly
Power OFF Power OFF
Place the main units into the
charging case
Or, press and hold the multi
button on the main unit L or R
for approximately 3 seconds
This operation cannot be done with this
product. Operate with the connected device
PLAY / PAUSE
Volume UP / DOWN
Function Operation
Next song (skip to the
next song)
Previous song (return to
the beginning of the
currently playing song*5)
Press the multi button on main unit L or R
twice in succession
Press the multi button on main unit L or R
three times in succession
Press the multi button on the
main unit L or R to operate play and pause
Display lampFunction Operation
<How to operate>
Press the Multi button on the main unit L or R when
receiving a call
<Pairing and connecting>
5How To Use
At the time of purchase, size M earpiece are attached to the main unit.
If size M does not fit your ears, please replace with the size XS, S or size L
earpiece in the contents.
If the earpiece does not fit correctly, it will not be possible to seal the
ear hole with the earpiece, which may cause sound leakage and no bass
to be heard. Also, if you feel that the volume is low, there is a possibility of
sound leakage.
<Choosing an earpiece>
Headphone
specication
Wireless
specication
Diameter 6mm
20~20,000Hz
Built-in rechargeable lithium ion battery
Continuous playback: approx.
5.5 hours, Continuous standby:
approx. 100 hours.
charging case charge main units for
approx. 3 times*1
Main Unit: Approx. 2 hours
Charging Case: Approx. 3.5 hours
Main Unit: Approx. 5g x 2
Charging Case: Approx. 45g
Max. 10m
Bluetooth® Ver.5.0
A2DP, AVRCP, HFP, HSP
SBC, AAC
Sealed dynamic type
SCMS-T
Max. up to 8 units
Earpieces (XS/S/M/L 2 units each)
※M size are attached to the main units.
Charging cable (USB A-Micro B approx.
45cm) x1, instruction manual, Quick start
guide
Driver unit
Model
Power supply
Duration
Charging time
Weight
Accessories
Communication
method
Communication
distance
Supported prole
Supported codecs
Supported content
protection
Multi-paring
Audio frequency
response
In order to use this product, it is necessary to pair with your
Bluetooth device. Once pairing is done, you can connect without
pairing again.
Specification
PA1375-00
6
7
*1: When pairing is performed for the
rst time after purchase, it will be in
paring mode immediately after the
power is turned on. When paring the
second device, it will be in pairing
mode approximately 30 seconds after
the power is turned on.
*1: When the main units and the charging case are fully charged, the playback time is a
maximum of 22 hours for a total of 4 times, where 1 time for the main units and 3 times for
charging from the charging case.
1.Press and hold the multi button on the main unit L or R for approximately 3
seconds to turn the power o.
2.Press and hold the multi buttons of the main units L and R for approximately
15 seconds, and release when the indicator LED ashes twice in purple.
3.Set the main units L and R in the charging case.
4.PleasecarryoutpairingaccordingtotheprocedureinHowtoUse
<Paringandconnecting>.
1. When the main units are removed from the charging case, the main
units’ power turns on automatically, and the indicator LED start
ashing.
2. Activate Bluetooth on your Bluetooth device.
3. The earphone will connect automatically.*2 After connect, the display
lamp will ash blue slowly.
If the problem does not improve, please reset the main units. When the main
units are reset, all paired device information is erased and it will be in the state
at the time of purchase. Please pair again.
5
Unable to
charge
Caution
· When the Bluetooth connection is not made and about 2 minutes elapses, the
power turns o automatically.
*4: If it does not connect automatically, please select "MXH-BTW1000" from the
list displayed on your Bluetooth device.
*2: If it does not connect automatically, please select "MXH-BTW1000" from the list
displayed on your Bluetooth device.
1. When the main units are removed from the charging case, the main
units’ power turns on automatically, and the indicator LED starts
ashing.
2. After a while, the LED of the main unit (L) starts to ash red and blue
alternately .* 1 The main unit (R) ashes in blue slowly.
3. Activate Bluetooth on your Bluetooth device.
*For details on setting, please refer to the instruction manual of the
device.
4. Please select "MXH-BTW1000" from the list displayed on your
Bluetooth device.
5. When pairing is completed, the blue indicator LED ashes slowly.
Caution
*3: Password may be called passcode, passkey, PIN code, etc.
●Pairing mode lasts for approximately 1 minute, and if it is not paired during
that time, it will become standby mode.
● Password*3 input may be requested by your Bluetooth device. In that case,
you can pair it by entering "0000".
●This product can simultaneously store up to 8 paired Bluetooth devices.
When more than 8 pairings are attempted, the information of the 1st
stored Bluetooth device is erased and is replaced by the newly paired
device. If you want to use a Bluetooth device whose information has been
erased, please pair it again.
Or, while the power is o, press
and hold the multi buttons on
the main unit L approximately
6 seconds
Power ON
Left Channel
Right Channel
Paring Mode
Remove the main units from
the charging case
Connected
Connected
Disconnected
Pairing
Mode
Main unit L: Blue
light ashes →
Blue light and
Red light ash
alternatively
Main unit R: Blue
light ashes
slowly
Main unit L:Blue
light ashes
main unit R:Blue
light ashes
slowly
Main unit LR:
Blue light ashes
slowly
Main unit LR:
Blue light ashes
slowly
Disconnect
Pairing
complete
Connect
Disconnect the product from
your device (or disable
Bluetooth)
Pair this product from your
Bluetooth device. Please refer
to <Pairing and connecting>
After pairing is completed,
automatically connects if
Bluetooth of your Bluetooth
device is enabled*4
Music Playback
Receiving a call
Ending a call Press the Multi Button on the main unit L or R during a call
The other party disconnects the call
Function Operation
*5: If the button is pressed at the beginning of the song, it will skip to the previous
song.
·Depending on your Bluetooth device, the operation may dier or may not be usable.
·Depending on your Bluetooth device, the operation may dier or may not be usable.
The power
does not
turn on
No sound
Sound is
distorted
or
interrupted
・Please reduce the volume of the connection device and this unit.
・Please turn o the functions such as bass boost of connection device.
・Remove any obstacles between the connection device and this unit.
・Keep the connection device close to this unit.
・Please keep away from radio equipment or microwave ovens.
Cannot hear
the voice on
the phone
・Please press the Multi Button to receive the call.
・Make sure that the Bluetooth device supports HFP or HSP.
Troubleshooting
・Insert the main units into the charging case and remove them
from the charging case.
・Press and hold down the Multi Button for about 3 seconds.
・Please charge the product.
・Please pair and connect Bluetooth.
・Power is not turned on. Press and hold the multi buttons for
approximately 3 seconds.
・Check to see if the connected device supports Bluetooth prole A2DP.
・Check if the Bluetooth device is playing.
・Please increase the volume of the Bluetooth device slowly.
・Insert the charging cable until the end of the charging terminal.
・Remove the main units from the charging case and place the main
units in again.
・Remove dirt from the main units and charging case contacts.
・Charge within the charge temperature range（5℃to 40℃） .
※Specications and appearances are subject to change without prior notice for improvement.
※This device has a lithium ion battery built in. Usage time and battery charging time are based
on our test results. It depends on the usage environment.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Maxell Asia, Ltd. is under license.
The names, logos, and service marks are registered trademarks and trade names of maxell
or their respective owners.
Maxell, Ltd.
30-13 Motoyoyogi-Cho, Shibuya-Ku, Tokyo 151-8527
Caution
Caution
■Hands free call
■
■
<Connection after the second time onward>
Common function
Or, while the power is o, press
and hold the multi buttons on
the main unit L and R for
approximately 3 seconds
Power On
Left Channel
Right Channel
Main Unit LR:
Light OFF
Main Unit LR:
Red light ON
Guidance
sound
Power On
Remove the main units from
the charging case Main Unit L:
Blue light ashes
Main Unit R:
Blue light ashes
slowly
Power OFF Power OFF
Place the main units into the
charging case
Or, press and hold the multi
button on the main unit L or R
for approximately 3 seconds
This operation cannot be done with this
product. Operate with the connected device
PLAY / PAUSE
Volume UP / DOWN
Function Operation
Next song (skip to the
next song)
Previous song (return to
the beginning of the
currently playing song*5)
Press the multi button on main unit L or R
twice in succession
Press the multi button on main unit L or R
three times in succession
Press the multi button on the
main unit L or R to operate play and pause
Display lampFunction Operation
<How to operate>
Press the Multi button on the main unit L or R when
receiving a call
<Pairing and connecting>
5How To Use
At the time of purchase, size M earpiece are attached to the main unit.
If size M does not fit your ears, please replace with the size XS, S or size L
earpiece in the contents.
If the earpiece does not fit correctly, it will not be possible to seal the
ear hole with the earpiece, which may cause sound leakage and no bass
to be heard. Also, if you feel that the volume is low, there is a possibility of
sound leakage.
<Choosing an earpiece>
Headphone
specication
Wireless
specication
Diameter 6mm
20~20,000Hz
Built-in rechargeable lithium ion battery
Continuous playback: approx.
5.5 hours, Continuous standby:
approx. 100 hours.
charging case charge main units for
approx. 3 times*1
Main Unit: Approx. 2 hours
Charging Case: Approx. 3.5 hours
Main Unit: Approx. 5g x 2
Charging Case: Approx. 45g
Max. 10m
Bluetooth® Ver.5.0
A2DP, AVRCP, HFP, HSP
SBC, AAC
Sealed dynamic type
SCMS-T
Max. up to 8 units
Earpieces (XS/S/M/L 2 units each)
※M size are attached to the main units.
Charging cable (USB A-Micro B approx.
45cm) x1, instruction manual, Quick start
guide
Driver unit
Model
Power supply
Duration
Charging time
Weight
Accessories
Communication
method
Communication
distance
Supported prole
Supported codecs
Supported content
protection
Multi-paring
Audio frequency
response
In order to use this product, it is necessary to pair with your
Bluetooth device. Once pairing is done, you can connect without
pairing again.
Other manuals for MXH-BTW1000
1
Table of contents
Other Maxell Headphones manuals
Maxell
Maxell Bass 13 EB2 User manual
Maxell
Maxell MXH-C120L User manual
Maxell
Maxell AIRLINK EB-ALBT140 User manual
Maxell
Maxell MXH-BTNF550 User manual
Maxell
Maxell Bass 13 User manual
Maxell
Maxell MXH-BTW510 User manual
Maxell
Maxell MXH-BT600E User manual
Maxell
Maxell MXH-BTW2000 User manual
Maxell
Maxell One User manual
Maxell
Maxell MXH-C120L User manual
