Maxell MXH-BTW510 User manual
MXH
-
BTW510
Wireless Earphone
Bluetooth®
*2: Minor injury refers to hurt, burnt, electric shock, etc. which do not result in
hospitalization or long-term follow-up consultation.
*3: Property damage refers broad damages to houses or properties and domestic
animals/ pets.
*1: Severe injury is indicated by those that have after effects such as blindness,
injury, burns (high temperature burns/low temperature burns, chemical burns),
electric shock, fracture, poisoning, etc. and those
requiring hospitalization or long-term regular hospital visits for treatment.
■Contents of the package
Thank you for purchasing this MAXELL product. Before use, make
sure to read this Instruction Manual and use the product correctly
and safely.
Even while walking, using it in where it will be dangerous if
surrounding sounds cannot be heard (such as railway crossings,
crosswalks, station platforms, roadways, construction sites, etc.)
can cause unexpected serious accidents.
Please make sure that small children will not swallow it by accident
In case of accident, seek medical attention immediately.
The surface of equipment and parts may deteriorate, result in
causing re. Please take extra care in closed automobile in summer,
or it is under direct sunlight or near a stove.
Radio waves may aect cardiac pacemakers and medical equipment.
Please do not use in areas where use of wireless equipment is
prohibited such as in hospitals or priority seat of trains etc.
May cause trac accident as hard to hear surroundings.
stands for caution to fire, explosion, high temperature
when handling the product. Details will be illustrated
inside the symbol.
stands for prohibited actions when handling the product.
Details will be illustrated inside or next to the symbol or
with written description next to it.
stands for instruction which must be followed. Details
will be illustrated inside or next to the symbol or with
written description next to it.
Examples of
Symbol
Danger
Warning
When charging, please use USB port of computer etc. or USB adapter.
Using other power exceeding USB rating may result in heat
generation, ignition, failure, electric shock or injury.
Please do not touch the leaked liquid. If liquid leaks from this device
and gets into the eye, do not rub. Rinse with plenty of clean water
immediately and consult a doctor. It may cause blindness.
This may result in heat generation, ignition, breakage, leakage.
If smoke or strange smell or sounds comes out, or water or foreign
object gets inside, or the product is dropped, please turn o the
power immediately. Furthermore, if it is being charged via USB,
unplug the USB connection. Continued usage may cause heat
generation, ignition, malfunction, electric shock, etc.
This may cause re or electric shock.
Fire, electric shock, injury may occur.
It may cause leakage, overheating, re or breakage.
Multi Function
Button*1
＊1：
Themultifunctionbuttonisatouchsensor.Pleaseoperatebytouchingdirectly
withthepadofyourfinger.Itcannotbeoperatedwithgloveson.Pleaseremove
and operate. When handling the main unit, please note that unintended
operationmayoccurifyourfingertouchesthemulti-functionbutton.
Continuously listening to loud volume can result in overstimulation
of ears for an extended period of time. It may aect the hearing.
Furthermore, if the volume is raised too much from the beginning,
the sudden loud sounds may harm ears. Before using, please reduce
the volume of the connected device.
~
Continued usage may cause irritation or rash.
If you feel an abnormality, please discontinue use and seek medical
attention.
It may hurt your ear hole.
Charging and using at temperatures outside this range may cause
leakage, overheating, breakage, or malfunction.
Please remove dust and dirt regularly. Otherwise it may cause
overheating or re.
Caution
station for moving object identication from the device,
immediately change the location of use or stop the emission of
radio waves.
In addition, when any troubles arise such as radio interference to
a specic low-power radio station or an amateur radio station for
moving object identication from this unit happened, please
contact our company’s "Customer Service Center”.
This unit is certied as a low-power data communication system
based on the Radio Law. Therefore, you do not need a wireless
station license to use this machine. However, it is prohibited to
disassemble, remodel or erase the certication making on the
product.
Please do not use in areas where use of mobile phone and
wireless equipment is prohibited such as in hospitals or priority
seat of trains etc.
Note on wireless use
This device uses 2.4 GHz frequency band. This frequency band is also
used by internal radio stations (radio stations that requires a license),
specic low-power radio stations (radio stations that do not require a
license) and amateur radio stations (radio stations that requires a
license) for moving object identication that are used in industrial,
scientic, and medical equipment such as microwave ovens as well as
factory manufacturing lines.
Before using this device, make sure that any internal radio station,
any specic low power radio station or any amateur radio station
for moving object identication are not operated nearby.
In the unlikely event of radio interference to an internal radio
1.
2.
3.
4.
5.
This radio equipment uses the 2.4 GHz band.
The FHSS modulation method is adopted as
the modulation method, and the interference
distance is 10 m.
3
Indicator LED / Mic
Charging
Terminal
(back)
Earpiece
4Preparation
This product has a built-in lithium ion battery. After purchase,
please charge before use.
※Please do not use other cables except the supplied cable for charging.
※If the battery is not used for a long period of time, charge it at least every 6 months.
Self-discharge may cause complete discharge and may become unable to charge.
※Lithium ion battery is a consumable item. The usage time will reduce with use. If the
usage time becomes extremely short, it indicates the end of battery life.
※Calls and playback will not work while charging.
※When the battery level of the main units become low, the guidance sound "battery
low" will be announced from the unit.
※Please use 5V DC power supply based on USB standard for a USB port.
※Charging time varies depending on the battery level. If the charging lamp turns o
immediately, the battery is fully charged.
Battery Case
204
-
B00344
Main Unit
Indicator LED
Front
Charging Cable
AC Adaptor
Charging
（ash）
Charging
completed
（Light o）
1. Place the main units into the charging case. Align the L and R display
of the main units to the corresponding indication in the charging
case for charging.
2. The indicator LED on and charging starts.
3. Charging is completed when the indicator lights on the main units go
out. (Charging time: approx. 2hrs)
<Charging the main units>
Connection diagram
USB Port of PC
2. Charging of the charging case starts and indicator LED ashes.
3. Charging is completed when the indicator LED turns o. (Charging
time: approx. 3hrs)
4. Remove the charging USB cable.
<Charging the charging case>
1. Connect the supplied USB charging cable to the charging case
and the USB port of PC or USB adapter.
Charging
Micro-USB Terminal
Back
Name of Each Part
Charging Cable
(USB-A–USB Micro-B approx. 45cm) x 1pc
Earpieces (S/M/L 2pcs each)
Main Unit (L x 1pc 、R x 1pc）
* M is attached to the main unit
Charging Case
User Manual
(This
Document)
2
Please strictly follow
Danger
Warning
Caution
If it is handled incorrectly, the user may suffer
death or severe injury*1 and the urgency is high.
If it is handled incorrectly, it is assumed that
the user may suffer death or serious injury*1.
If it is handled incorrectly, it is assumed that the user
may suffer minor injury*2 or there is a possibility that
property damage*3 may occur.”
Safety Caution
1Introduction
●
●
Maxell shall not be responsible for any damage caused by res,
earthquakes, action of a third party, any accidents, intended or unintended
misuse or other usage under abnormal conditions.
This Instruction Manual may be subject to change without prior notice.
In order to improve the product, external appearance or part of the
specications may be subject to change without prior notice.
The warranty stated in the warranty certicate is all we warrant, and we do
not warrant anything except for this warranty including express warranty
and implied warranty.
About the user manual
Maxell shall not be responsible for failure due to any damage caused by
usage other than described in the instruction manual.
This product is Japanese specication. We assume no responsibility if use
outside Japan.
This product is not being designed to be any equipment or device which
could be concerned with human life such as medical device, nuclear device,
astronomical device, transportation device etc., nor equipment or devices
which requires high reliability. In case this product is used for the above
equipment and or systems, Maxell do not responsible for any injuries or re
accident cause by the failure of this product.
Disclaimer (See the warranty certicate for details of the warranty.)
User Manual
MXH
-
BTW510
Wireless Earphone
Bluetooth®
*2: Minor injury refers to hurt, burnt, electric shock, etc. which do not result in
hospitalization or long-term follow-up consultation.
*3: Property damage refers broad damages to houses or properties and domestic
animals/ pets.
*1: Severe injury is indicated by those that have after effects such as blindness,
injury, burns (high temperature burns/low temperature burns, chemical burns),
electric shock, fracture, poisoning, etc. and those
requiring hospitalization or long-term regular hospital visits for treatment.
■Contents of the package
Thank you for purchasing this MAXELL product. Before use, make
sure to read this Instruction Manual and use the product correctly
and safely.
Even while walking, using it in where it will be dangerous if
surrounding sounds cannot be heard (such as railway crossings,
crosswalks, station platforms, roadways, construction sites, etc.)
can cause unexpected serious accidents.
Please make sure that small children will not swallow it by accident
In case of accident, seek medical attention immediately.
The surface of equipment and parts may deteriorate, result in
causing re. Please take extra care in closed automobile in summer,
or it is under direct sunlight or near a stove.
Radio waves may aect cardiac pacemakers and medical equipment.
Please do not use in areas where use of wireless equipment is
prohibited such as in hospitals or priority seat of trains etc.
May cause trac accident as hard to hear surroundings.
stands for caution to fire, explosion, high temperature
when handling the product. Details will be illustrated
inside the symbol.
stands for prohibited actions when handling the product.
Details will be illustrated inside or next to the symbol or
with written description next to it.
stands for instruction which must be followed. Details
will be illustrated inside or next to the symbol or with
written description next to it.
Examples of
Symbol
Danger
Warning
When charging, please use USB port of computer etc. or USB adapter.
Using other power exceeding USB rating may result in heat
generation, ignition, failure, electric shock or injury.
Please do not touch the leaked liquid. If liquid leaks from this device
and gets into the eye, do not rub. Rinse with plenty of clean water
immediately and consult a doctor. It may cause blindness.
This may result in heat generation, ignition, breakage, leakage.
If smoke or strange smell or sounds comes out, or water or foreign
object gets inside, or the product is dropped, please turn o the
power immediately. Furthermore, if it is being charged via USB,
unplug the USB connection. Continued usage may cause heat
generation, ignition, malfunction, electric shock, etc.
This may cause re or electric shock.
Fire, electric shock, injury may occur.
It may cause leakage, overheating, re or breakage.
Multi Function
Button*1
＊1：
Themultifunctionbuttonisatouchsensor.Pleaseoperatebytouchingdirectly
withthepadofyourfinger.Itcannotbeoperatedwithgloveson.Pleaseremove
and operate. When handling the main unit, please note that unintended
operationmayoccurifyourfingertouchesthemulti-functionbutton.
Continuously listening to loud volume can result in overstimulation
of ears for an extended period of time. It may aect the hearing.
Furthermore, if the volume is raised too much from the beginning,
the sudden loud sounds may harm ears. Before using, please reduce
the volume of the connected device.
~
Continued usage may cause irritation or rash.
If you feel an abnormality, please discontinue use and seek medical
attention.
It may hurt your ear hole.
Charging and using at temperatures outside this range may cause
leakage, overheating, breakage, or malfunction.
Please remove dust and dirt regularly. Otherwise it may cause
overheating or re.
Caution
station for moving object identication from the device,
immediately change the location of use or stop the emission of
radio waves.
In addition, when any troubles arise such as radio interference to
a specic low-power radio station or an amateur radio station for
moving object identication from this unit happened, please
contact our company’s "Customer Service Center”.
This unit is certied as a low-power data communication system
based on the Radio Law. Therefore, you do not need a wireless
station license to use this machine. However, it is prohibited to
disassemble, remodel or erase the certication making on the
product.
Please do not use in areas where use of mobile phone and
wireless equipment is prohibited such as in hospitals or priority
seat of trains etc.
Note on wireless use
This device uses 2.4 GHz frequency band. This frequency band is also
used by internal radio stations (radio stations that requires a license),
specic low-power radio stations (radio stations that do not require a
license) and amateur radio stations (radio stations that requires a
license) for moving object identication that are used in industrial,
scientic, and medical equipment such as microwave ovens as well as
factory manufacturing lines.
Before using this device, make sure that any internal radio station,
any specic low power radio station or any amateur radio station
for moving object identication are not operated nearby.
In the unlikely event of radio interference to an internal radio
1.
2.
3.
4.
5.
This radio equipment uses the 2.4 GHz band.
The FHSS modulation method is adopted as
the modulation method, and the interference
distance is 10 m.
3
Indicator LED / Mic
Charging
Terminal
(back)
Earpiece
4Preparation
This product has a built-in lithium ion battery. After purchase,
please charge before use.
※Please do not use other cables except the supplied cable for charging.
※If the battery is not used for a long period of time, charge it at least every 6 months.
Self-discharge may cause complete discharge and may become unable to charge.
※Lithium ion battery is a consumable item. The usage time will reduce with use. If the
usage time becomes extremely short, it indicates the end of battery life.
※Calls and playback will not work while charging.
※When the battery level of the main units become low, the guidance sound "battery
low" will be announced from the unit.
※Please use 5V DC power supply based on USB standard for a USB port.
※Charging time varies depending on the battery level. If the charging lamp turns o
immediately, the battery is fully charged.
Battery Case
204
-
B00344
Main Unit
Indicator LED
Front
Charging Cable
AC Adaptor
Charging
（ash）
Charging
completed
（Light o）
1. Place the main units into the charging case. Align the L and R display
of the main units to the corresponding indication in the charging
case for charging.
2. The indicator LED on and charging starts.
3. Charging is completed when the indicator lights on the main units go
out. (Charging time: approx. 2hrs)
<Charging the main units>
Connection diagram
USB Port of PC
2. Charging of the charging case starts and indicator LED ashes.
3. Charging is completed when the indicator LED turns o. (Charging
time: approx. 3hrs)
4. Remove the charging USB cable.
<Charging the charging case>
1. Connect the supplied USB charging cable to the charging case
and the USB port of PC or USB adapter.
Charging
Micro-USB Terminal
Back
Name of Each Part
Charging Cable
(USB-A–USB Micro-B approx. 45cm) x 1pc
Earpieces (S/M/L 2pcs each)
Main Unit (L x 1pc 、R x 1pc）
* M is attached to the main unit
Charging Case
User Manual
(This
Document)
2
Please strictly follow
Danger
Warning
Caution
If it is handled incorrectly, the user may suffer
death or severe injury*1 and the urgency is high.
If it is handled incorrectly, it is assumed that
the user may suffer death or serious injury*1.
If it is handled incorrectly, it is assumed that the user
may suffer minor injury*2 or there is a possibility that
property damage*3 may occur.”
Safety Caution
1Introduction
●
●
Maxell shall not be responsible for any damage caused by res,
earthquakes, action of a third party, any accidents, intended or unintended
misuse or other usage under abnormal conditions.
This Instruction Manual may be subject to change without prior notice.
In order to improve the product, external appearance or part of the
specications may be subject to change without prior notice.
The warranty stated in the warranty certicate is all we warrant, and we do
not warrant anything except for this warranty including express warranty
and implied warranty.
About the user manual
Maxell shall not be responsible for failure due to any damage caused by
usage other than described in the instruction manual.
This product is Japanese specication. We assume no responsibility if use
outside Japan.
This product is not being designed to be any equipment or device which
could be concerned with human life such as medical device, nuclear device,
astronomical device, transportation device etc., nor equipment or devices
which requires high reliability. In case this product is used for the above
equipment and or systems, Maxell do not responsible for any injuries or re
accident cause by the failure of this product.
Disclaimer (See the warranty certicate for details of the warranty.)
User Manual
MXH
-
BTW510
Wireless Earphone
Bluetooth®
*2: Minor injury refers to hurt, burnt, electric shock, etc. which do not result in
hospitalization or long-term follow-up consultation.
*3: Property damage refers broad damages to houses or properties and domestic
animals/ pets.
*1: Severe injury is indicated by those that have after effects such as blindness,
injury, burns (high temperature burns/low temperature burns, chemical burns),
electric shock, fracture, poisoning, etc. and those
requiring hospitalization or long-term regular hospital visits for treatment.
■Contents of the package
Thank you for purchasing this MAXELL product. Before use, make
sure to read this Instruction Manual and use the product correctly
and safely.
Even while walking, using it in where it will be dangerous if
surrounding sounds cannot be heard (such as railway crossings,
crosswalks, station platforms, roadways, construction sites, etc.)
can cause unexpected serious accidents.
Please make sure that small children will not swallow it by accident
In case of accident, seek medical attention immediately.
The surface of equipment and parts may deteriorate, result in
causing re. Please take extra care in closed automobile in summer,
or it is under direct sunlight or near a stove.
Radio waves may aect cardiac pacemakers and medical equipment.
Please do not use in areas where use of wireless equipment is
prohibited such as in hospitals or priority seat of trains etc.
May cause trac accident as hard to hear surroundings.
stands for caution to fire, explosion, high temperature
when handling the product. Details will be illustrated
inside the symbol.
stands for prohibited actions when handling the product.
Details will be illustrated inside or next to the symbol or
with written description next to it.
stands for instruction which must be followed. Details
will be illustrated inside or next to the symbol or with
written description next to it.
Examples of
Symbol
Danger
Warning
When charging, please use USB port of computer etc. or USB adapter.
Using other power exceeding USB rating may result in heat
generation, ignition, failure, electric shock or injury.
Please do not touch the leaked liquid. If liquid leaks from this device
and gets into the eye, do not rub. Rinse with plenty of clean water
immediately and consult a doctor. It may cause blindness.
This may result in heat generation, ignition, breakage, leakage.
If smoke or strange smell or sounds comes out, or water or foreign
object gets inside, or the product is dropped, please turn o the
power immediately. Furthermore, if it is being charged via USB,
unplug the USB connection. Continued usage may cause heat
generation, ignition, malfunction, electric shock, etc.
This may cause re or electric shock.
Fire, electric shock, injury may occur.
It may cause leakage, overheating, re or breakage.
Multi Function
Button*1
＊1：
Themultifunctionbuttonisatouchsensor.Pleaseoperatebytouchingdirectly
withthepadofyourfinger.Itcannotbeoperatedwithgloveson.Pleaseremove
and operate. When handling the main unit, please note that unintended
operationmayoccurifyourfingertouchesthemulti-functionbutton.
Continuously listening to loud volume can result in overstimulation
of ears for an extended period of time. It may aect the hearing.
Furthermore, if the volume is raised too much from the beginning,
the sudden loud sounds may harm ears. Before using, please reduce
the volume of the connected device.
~
Continued usage may cause irritation or rash.
If you feel an abnormality, please discontinue use and seek medical
attention.
It may hurt your ear hole.
Charging and using at temperatures outside this range may cause
leakage, overheating, breakage, or malfunction.
Please remove dust and dirt regularly. Otherwise it may cause
overheating or re.
Caution
station for moving object identication from the device,
immediately change the location of use or stop the emission of
radio waves.
In addition, when any troubles arise such as radio interference to
a specic low-power radio station or an amateur radio station for
moving object identication from this unit happened, please
contact our company’s "Customer Service Center”.
This unit is certied as a low-power data communication system
based on the Radio Law. Therefore, you do not need a wireless
station license to use this machine. However, it is prohibited to
disassemble, remodel or erase the certication making on the
product.
Please do not use in areas where use of mobile phone and
wireless equipment is prohibited such as in hospitals or priority
seat of trains etc.
Note on wireless use
This device uses 2.4 GHz frequency band. This frequency band is also
used by internal radio stations (radio stations that requires a license),
specic low-power radio stations (radio stations that do not require a
license) and amateur radio stations (radio stations that requires a
license) for moving object identication that are used in industrial,
scientic, and medical equipment such as microwave ovens as well as
factory manufacturing lines.
Before using this device, make sure that any internal radio station,
any specic low power radio station or any amateur radio station
for moving object identication are not operated nearby.
In the unlikely event of radio interference to an internal radio
1.
2.
3.
4.
5.
This radio equipment uses the 2.4 GHz band.
The FHSS modulation method is adopted as
the modulation method, and the interference
distance is 10 m.
3
Indicator LED / Mic
Charging
Terminal
(back)
Earpiece
4Preparation
This product has a built-in lithium ion battery. After purchase,
please charge before use.
※Please do not use other cables except the supplied cable for charging.
※If the battery is not used for a long period of time, charge it at least every 6 months.
Self-discharge may cause complete discharge and may become unable to charge.
※Lithium ion battery is a consumable item. The usage time will reduce with use. If the
usage time becomes extremely short, it indicates the end of battery life.
※Calls and playback will not work while charging.
※When the battery level of the main units become low, the guidance sound "battery
low" will be announced from the unit.
※Please use 5V DC power supply based on USB standard for a USB port.
※Charging time varies depending on the battery level. If the charging lamp turns o
immediately, the battery is fully charged.
Battery Case
204
-
B00344
Main Unit
Indicator LED
Front
Charging Cable
AC Adaptor
Charging
（ash）
Charging
completed
（Light o）
1. Place the main units into the charging case. Align the L and R display
of the main units to the corresponding indication in the charging
case for charging.
2. The indicator LED on and charging starts.
3. Charging is completed when the indicator lights on the main units go
out. (Charging time: approx. 2hrs)
<Charging the main units>
Connection diagram
USB Port of PC
2. Charging of the charging case starts and indicator LED ashes.
3. Charging is completed when the indicator LED turns o. (Charging
time: approx. 3hrs)
4. Remove the charging USB cable.
<Charging the charging case>
1. Connect the supplied USB charging cable to the charging case
and the USB port of PC or USB adapter.
Charging
Micro-USB Terminal
Back
Name of Each Part
Charging Cable
(USB-A–USB Micro-B approx. 45cm) x 1pc
Earpieces (S/M/L 2pcs each)
Main Unit (L x 1pc 、R x 1pc）
* M is attached to the main unit
Charging Case
User Manual
(This
Document)
2
Please strictly follow
Danger
Warning
Caution
If it is handled incorrectly, the user may suffer
death or severe injury*1 and the urgency is high.
If it is handled incorrectly, it is assumed that
the user may suffer death or serious injury*1.
If it is handled incorrectly, it is assumed that the user
may suffer minor injury*2 or there is a possibility that
property damage*3 may occur.”
Safety Caution
1Introduction
●
●
Maxell shall not be responsible for any damage caused by res,
earthquakes, action of a third party, any accidents, intended or unintended
misuse or other usage under abnormal conditions.
This Instruction Manual may be subject to change without prior notice.
In order to improve the product, external appearance or part of the
specications may be subject to change without prior notice.
The warranty stated in the warranty certicate is all we warrant, and we do
not warrant anything except for this warranty including express warranty
and implied warranty.
About the user manual
Maxell shall not be responsible for failure due to any damage caused by
usage other than described in the instruction manual.
This product is Japanese specication. We assume no responsibility if use
outside Japan.
This product is not being designed to be any equipment or device which
could be concerned with human life such as medical device, nuclear device,
astronomical device, transportation device etc., nor equipment or devices
which requires high reliability. In case this product is used for the above
equipment and or systems, Maxell do not responsible for any injuries or re
accident cause by the failure of this product.
Disclaimer (See the warranty certicate for details of the warranty.)
User Manual
MXH
-
BTW510
Wireless Earphone
Bluetooth®
*2: Minor injury refers to hurt, burnt, electric shock, etc. which do not result in
hospitalization or long-term follow-up consultation.
*3: Property damage refers broad damages to houses or properties and domestic
animals/ pets.
*1: Severe injury is indicated by those that have after effects such as blindness,
injury, burns (high temperature burns/low temperature burns, chemical burns),
electric shock, fracture, poisoning, etc. and those
requiring hospitalization or long-term regular hospital visits for treatment.
■Contents of the package
Thank you for purchasing this MAXELL product. Before use, make
sure to read this Instruction Manual and use the product correctly
and safely.
Even while walking, using it in where it will be dangerous if
surrounding sounds cannot be heard (such as railway crossings,
crosswalks, station platforms, roadways, construction sites, etc.)
can cause unexpected serious accidents.
Please make sure that small children will not swallow it by accident
In case of accident, seek medical attention immediately.
The surface of equipment and parts may deteriorate, result in
causing re. Please take extra care in closed automobile in summer,
or it is under direct sunlight or near a stove.
Radio waves may aect cardiac pacemakers and medical equipment.
Please do not use in areas where use of wireless equipment is
prohibited such as in hospitals or priority seat of trains etc.
May cause trac accident as hard to hear surroundings.
stands for caution to fire, explosion, high temperature
when handling the product. Details will be illustrated
inside the symbol.
stands for prohibited actions when handling the product.
Details will be illustrated inside or next to the symbol or
with written description next to it.
stands for instruction which must be followed. Details
will be illustrated inside or next to the symbol or with
written description next to it.
Examples of
Symbol
Danger
Warning
When charging, please use USB port of computer etc. or USB adapter.
Using other power exceeding USB rating may result in heat
generation, ignition, failure, electric shock or injury.
Please do not touch the leaked liquid. If liquid leaks from this device
and gets into the eye, do not rub. Rinse with plenty of clean water
immediately and consult a doctor. It may cause blindness.
This may result in heat generation, ignition, breakage, leakage.
If smoke or strange smell or sounds comes out, or water or foreign
object gets inside, or the product is dropped, please turn o the
power immediately. Furthermore, if it is being charged via USB,
unplug the USB connection. Continued usage may cause heat
generation, ignition, malfunction, electric shock, etc.
This may cause re or electric shock.
Fire, electric shock, injury may occur.
It may cause leakage, overheating, re or breakage.
Multi Function
Button*1
＊1：
Themultifunctionbuttonisatouchsensor.Pleaseoperatebytouchingdirectly
withthepadofyourfinger.Itcannotbeoperatedwithgloveson.Pleaseremove
and operate. When handling the main unit, please note that unintended
operationmayoccurifyourfingertouchesthemulti-functionbutton.
Continuously listening to loud volume can result in overstimulation
of ears for an extended period of time. It may aect the hearing.
Furthermore, if the volume is raised too much from the beginning,
the sudden loud sounds may harm ears. Before using, please reduce
the volume of the connected device.
~
Continued usage may cause irritation or rash.
If you feel an abnormality, please discontinue use and seek medical
attention.
It may hurt your ear hole.
Charging and using at temperatures outside this range may cause
leakage, overheating, breakage, or malfunction.
Please remove dust and dirt regularly. Otherwise it may cause
overheating or re.
Caution
station for moving object identication from the device,
immediately change the location of use or stop the emission of
radio waves.
In addition, when any troubles arise such as radio interference to
a specic low-power radio station or an amateur radio station for
moving object identication from this unit happened, please
contact our company’s "Customer Service Center”.
This unit is certied as a low-power data communication system
based on the Radio Law. Therefore, you do not need a wireless
station license to use this machine. However, it is prohibited to
disassemble, remodel or erase the certication making on the
product.
Please do not use in areas where use of mobile phone and
wireless equipment is prohibited such as in hospitals or priority
seat of trains etc.
Note on wireless use
This device uses 2.4 GHz frequency band. This frequency band is also
used by internal radio stations (radio stations that requires a license),
specic low-power radio stations (radio stations that do not require a
license) and amateur radio stations (radio stations that requires a
license) for moving object identication that are used in industrial,
scientic, and medical equipment such as microwave ovens as well as
factory manufacturing lines.
Before using this device, make sure that any internal radio station,
any specic low power radio station or any amateur radio station
for moving object identication are not operated nearby.
In the unlikely event of radio interference to an internal radio
1.
2.
3.
4.
5.
This radio equipment uses the 2.4 GHz band.
The FHSS modulation method is adopted as
the modulation method, and the interference
distance is 10 m.
3
Indicator LED / Mic
Charging
Terminal
(back)
Earpiece
4Preparation
This product has a built-in lithium ion battery. After purchase,
please charge before use.
※Please do not use other cables except the supplied cable for charging.
※If the battery is not used for a long period of time, charge it at least every 6 months.
Self-discharge may cause complete discharge and may become unable to charge.
※Lithium ion battery is a consumable item. The usage time will reduce with use. If the
usage time becomes extremely short, it indicates the end of battery life.
※Calls and playback will not work while charging.
※When the battery level of the main units become low, the guidance sound "battery
low" will be announced from the unit.
※Please use 5V DC power supply based on USB standard for a USB port.
※Charging time varies depending on the battery level. If the charging lamp turns o
immediately, the battery is fully charged.
Battery Case
204
-
B00344
Main Unit
Indicator LED
Front
Charging Cable
AC Adaptor
Charging
（ash）
Charging
completed
（Light o）
1. Place the main units into the charging case. Align the L and R display
of the main units to the corresponding indication in the charging
case for charging.
2. The indicator LED on and charging starts.
3. Charging is completed when the indicator lights on the main units go
out. (Charging time: approx. 2hrs)
<Charging the main units>
Connection diagram
USB Port of PC
2. Charging of the charging case starts and indicator LED ashes.
3. Charging is completed when the indicator LED turns o. (Charging
time: approx. 3hrs)
4. Remove the charging USB cable.
<Charging the charging case>
1. Connect the supplied USB charging cable to the charging case
and the USB port of PC or USB adapter.
Charging
Micro-USB Terminal
Back
Name of Each Part
Charging Cable
(USB-A–USB Micro-B approx. 45cm) x 1pc
Earpieces (S/M/L 2pcs each)
Main Unit (L x 1pc 、R x 1pc）
* M is attached to the main unit
Charging Case
User Manual
(This
Document)
2
Please strictly follow
Danger
Warning
Caution
If it is handled incorrectly, the user may suffer
death or severe injury*1 and the urgency is high.
If it is handled incorrectly, it is assumed that
the user may suffer death or serious injury*1.
If it is handled incorrectly, it is assumed that the user
may suffer minor injury*2 or there is a possibility that
property damage*3 may occur.”
Safety Caution
1Introduction
●
●
Maxell shall not be responsible for any damage caused by res,
earthquakes, action of a third party, any accidents, intended or unintended
misuse or other usage under abnormal conditions.
This Instruction Manual may be subject to change without prior notice.
In order to improve the product, external appearance or part of the
specications may be subject to change without prior notice.
The warranty stated in the warranty certicate is all we warrant, and we do
not warrant anything except for this warranty including express warranty
and implied warranty.
About the user manual
Maxell shall not be responsible for failure due to any damage caused by
usage other than described in the instruction manual.
This product is Japanese specication. We assume no responsibility if use
outside Japan.
This product is not being designed to be any equipment or device which
could be concerned with human life such as medical device, nuclear device,
astronomical device, transportation device etc., nor equipment or devices
which requires high reliability. In case this product is used for the above
equipment and or systems, Maxell do not responsible for any injuries or re
accident cause by the failure of this product.
Disclaimer (See the warranty certicate for details of the warranty.)
User Manual
PA1899-01
Caution
*3: Password may be called passcode, passkey, PIN code, etc.
●Pairing mode lasts for approximately 3 minutes, and if it is not paired during
that time, the power will OFF.
● Password*3 input may be requested by your Bluetooth device. In that case,
you can pair it by entering "0000".
●This product can simultaneously store up to 7 paired Bluetooth devices.
When more than 8 pairings are attempted, the information of the 1st
stored Bluetooth device is erased and is replaced by the newly paired
device. If you want to use a Bluetooth device whose information has been
erased, please pair it again.
*2: If it does not connect automatically, please select "MXH-BTW510" from the list
displayed on your device.
1. When the main units are removed from the charging case, the main
units’ power turns on automatically, and the indicator LED start
ashing.
2. Activate Bluetooth on your Bluetooth device.
3. The earphone will connect automatically.*2 After connect, the display
lamp will ash blue slowly.
<Connection after the second time onward>
At the time of purchase,
M does not t your ears, please replace with the size S or size L earpiece in
the contents. If the earpiece does not t correctly, it will not be possible to seal
the ear hole with the earpiece, which may cause sound leakage and no bass to
be heard. Also, if you feel that the volume is low, there is a possibility of sound
leakage.
size M earpiece are attached to the main unit. If size
<Choosing an earpiece>
<Pairing and connecting>
5How to Use
In order to use this product, it is necessary to pair with your device.
Once pairing is done, you can connect without pairing again.
1. When the main units are removed from the charging case, the main
units power turns on automatically, and the indicator LED starts
ashing.
2. After a while, the LED of the main unit (L) starts to ash red and blue
alternately.*1 The LED of The main unit (R) will ash slowly in blue.
3. Enable Bluetooth function on your Bluetooth device.
For details on setting, please refer to the instruction manual of the
device.
4. Please select "MXH-BTW510" from the list displayed on your
Bluetooth device.
5. When pairing is completed, the blue indicator
LED ashes slowly.
*1: When pairing is performed for the rst time
after purchase, it will be in paring mode
immediately after the power is turned on.
When paring the second or subsequent
devices, it will be in pairing mode approx. 15
second after the power is turn on.
Caution After approx. 3 minutes without Bluetooth connection, the power will
turns o automatically.
*4: If it does not connect automatically, please select "MXH-BTW510" from the
Receiving a call
Ending a call
Press the multi function button on the main unit L or R
during a call
The other party disconnects the call
Function Operation
Depending on your device, the operation may dierent or may not be
available.
Caution
■Hands free call
Press the multi function button on the main unit L or R when
receiving a call
6
The power
does not
turn on
No sound
Troubleshooting
Unable to
charge
Sound is
distorted or
interrupted
Cannot hear
the voice on
the phone
・Insert the main units into the charging case and remove them
from the charging case
・Please charge the product
・Please pair and connect Bluetooth
・Power is not turned on. Put the main unit in the charging case and
take it out
・Check to see if the connected device supports Bluetooth prole
A2DP
・Check if the connected device is playing
・Please increase the volume of the Bluetooth device slowly
・Please reduce the volume of the connected device and this unit
・Please turn o the functions such as bass boost of connection device
・Remove any obstacles between the connection device and this unit
・Keep the connection device close to this unit
・Please keep away from radio equipment or microwave ovens
・Please press the multi function button to receive the call
・Make sure that the Bluetooth device supports HSP
・Insert the charging cable to the charging terminal completely
・Remove the main units from the charging case and place the main
units in again
・Remove dirt from the main units and charging case contacts
・Charge within the charge temperature range(5°C to 40°C）
Power ON
Pairing Mode
Remove the main unit
from the charging case, it will
be in paring mode immediately
Connected
Connected
Disconnected
Pairing
Mode
Main unit L: Blue
light ashes →
Blue light and
Red light ash
alternatively
Main unit R: Blue
light ash slowly
Main unit LR:
Blue light ashes
slowly
Main unit LR:
Blue light ashes
slowly
Main unit LR:
Blue light ashes
slowly
Main unit L:
Blue light ashes
Disconnect
Pairing
complete
Connect
Disconnect the product from
your device (or disable
Bluetooth)
Pair this product from your
Bluetooth device. Please refer
to <Pairing and connecting>
After pairing is completed,
automatically connects if
Bluetooth of your Bluetooth
device is enabled*4
Music Playback
*5: If the button is pressed at the beginning of the song, it will skip to the previous
song.
Depending on your device, the operation may dierent or may not be
available.
Caution
■
This operation cannot be done with this
product. Operate with the connected device
PLAY / PAUSE
Volume UP / DOWN
Function Operation
Next song (skip to the
next song)
Previous song (return to
the beginning of the
currently playing song*5)
Press the multi function button on main unit
L or R twice in succession
Press the multi function button on main unit
L or R three times in succession
Press the multi function button on the
main unit L or R to operate play and pause
<The 1st Device>
<The 2nd or subsequent
devices>
1. Put the main unit L and R in the charging case.
2. Press and hold the multi function buttons of the main unit L and R for
approximately 13 seconds, and release when the blue indicator LED ashes.
3. Remove the main unit L and R from the charging case.
4. Please carry out pairing according to the procedure in How to Use
<Pairing and connecting>.
If the problem does not improve, please reset the main units. When the main
units are reset, all paired device information is erased and it will be in the state
at the time of purchase. Please pair again.
5
*1: When the main units and the charging case are fully charged, the max. playback time is 21
hours, where 1 time by the charged main units and 2 times by charging from the charging
case. Total 3 times.
※Specications and appearances are subject to change without prior notice for improvement.
※This device has a lithium ion battery built in. Usage time and battery charging time are based
on our test results. It depends on the usage environment.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Maxell Asia, Ltd. is under license. The names, logos, and
service marks are registered trademarks and trade names of maxell or their respective
owners.
Qualcomm® aptXTM audio is a product of Qualcomm Technologies International, Ltd.
aptXTM
is a trademark of Qualcomm Technologies International, Ltd., registered in the United States
and other countries, used with permission. Qualcomm® is a trademark of Qualcomm
Incorporated, registered in the United States and other countries, used with permission.
Maxell, Ltd.
30-13 Motoyoyogi-Cho, Shibuya-Ku, Tokyo 151-8527
8
Discard This Product
Disposal of rechargeable batteries in Japan
The built-in rechargeable battery can be recycled.
Do not remove the rechargeable battery yourself, please
contact our Customer Service Center.
Please refer to the JBRC website for information on
rechargeable battery collection / recycling and recycling
partners.
Caution
General
specication
Wireless
specication
Diameter 6mm
20~20,000Hz
Built-in rechargeable lithium ion battery
Continuous playback: approx. 7 hours,
Continuous standby: approx. 160 hours.
Charging case charge main units for
approx. 2 times*1
Main Unit: Approx. 2 hours
Charging Case: Approx. 3 hours
Main Unit: Approx. 4g x 2
Charging Case: Approx. 24g
Max. 10m
Bluetooth® Ver.5.0
A2DP, AVRCP, HFP, HSP
Sealed dynamic type
SCMS-T
Max. up to 7 units
Earpieces (S/M/L 2 units each)
※M size are attached to the main units.
Charging cable (USB-A-USB Micro-B
approx. 45cm) x1, instruction manual,
Quick start guide
Driver unit
Type
Power supply
Using time
Charging time
Waterproof level
Weight
Accessories
Communication
method
Communication
distance
Supported prole
Supported codecs
Supported content
protection
Multi-pairing
Audio frequency
response
7Specification
SBC,aptXTM
IPX5（Excluding the charging case）
Remove the main unit from
the charging case,
It will be in pairing mode in
about 15 seconds. Or, after
taking out the main unit,
Press and hold the multi
button of main unit L for about
3 seconds.
■Common function
Power On
Guidance
Sound
Power On Remove the main units from
the charging case
Main unit L:
Blue light ashes
Main unit R:
Display LampFunction Operation
<How to operate>
Blue light ashes
slowly
Main unit LR:
Blue light and
Red light ash
alternatively,
then red light
turns on and o
Main unit LR:
Red light ON
Power OFF Power OFF
Place the main units into the
charging case
Or, press and hold the multi
function button for
approximately 6 seconds
PA1899-01
Caution
*3: Password may be called passcode, passkey, PIN code, etc.
●Pairing mode lasts for approximately 3 minutes, and if it is not paired during
that time, the power will OFF.
● Password*3 input may be requested by your Bluetooth device. In that case,
you can pair it by entering "0000".
●This product can simultaneously store up to 7 paired Bluetooth devices.
When more than 8 pairings are attempted, the information of the 1st
stored Bluetooth device is erased and is replaced by the newly paired
device. If you want to use a Bluetooth device whose information has been
erased, please pair it again.
*2: If it does not connect automatically, please select "MXH-BTW510" from the list
displayed on your device.
1. When the main units are removed from the charging case, the main
units’ power turns on automatically, and the indicator LED start
ashing.
2. Activate Bluetooth on your Bluetooth device.
3. The earphone will connect automatically.*2 After connect, the display
lamp will ash blue slowly.
<Connection after the second time onward>
At the time of purchase,
M does not t your ears, please replace with the size S or size L earpiece in
the contents. If the earpiece does not t correctly, it will not be possible to seal
the ear hole with the earpiece, which may cause sound leakage and no bass to
be heard. Also, if you feel that the volume is low, there is a possibility of sound
leakage.
size M earpiece are attached to the main unit. If size
<Choosing an earpiece>
<Pairing and connecting>
5How to Use
In order to use this product, it is necessary to pair with your device.
Once pairing is done, you can connect without pairing again.
1. When the main units are removed from the charging case, the main
units power turns on automatically, and the indicator LED starts
ashing.
2. After a while, the LED of the main unit (L) starts to ash red and blue
alternately.*1 The LED of The main unit (R) will ash slowly in blue.
3. Enable Bluetooth function on your Bluetooth device.
For details on setting, please refer to the instruction manual of the
device.
4. Please select "MXH-BTW510" from the list displayed on your
Bluetooth device.
5. When pairing is completed, the blue indicator
LED ashes slowly.
*1: When pairing is performed for the rst time
after purchase, it will be in paring mode
immediately after the power is turned on.
When paring the second or subsequent
devices, it will be in pairing mode approx. 15
second after the power is turn on.
Caution After approx. 3 minutes without Bluetooth connection, the power will
turns o automatically.
*4: If it does not connect automatically, please select "MXH-BTW510" from the
Receiving a call
Ending a call
Press the multi function button on the main unit L or R
during a call
The other party disconnects the call
Function Operation
Depending on your device, the operation may dierent or may not be
available.
Caution
■Hands free call
Press the multi function button on the main unit L or R when
receiving a call
6
The power
does not
turn on
No sound
Troubleshooting
Unable to
charge
Sound is
distorted or
interrupted
Cannot hear
the voice on
the phone
・Insert the main units into the charging case and remove them
from the charging case
・Please charge the product
・Please pair and connect Bluetooth
・Power is not turned on. Put the main unit in the charging case and
take it out
・Check to see if the connected device supports Bluetooth prole
A2DP
・Check if the connected device is playing
・Please increase the volume of the Bluetooth device slowly
・Please reduce the volume of the connected device and this unit
・Please turn o the functions such as bass boost of connection device
・Remove any obstacles between the connection device and this unit
・Keep the connection device close to this unit
・Please keep away from radio equipment or microwave ovens
・Please press the multi function button to receive the call
・Make sure that the Bluetooth device supports HSP
・Insert the charging cable to the charging terminal completely
・Remove the main units from the charging case and place the main
units in again
・Remove dirt from the main units and charging case contacts
・Charge within the charge temperature range(5°C to 40°C）
Power ON
Pairing Mode
Remove the main unit
from the charging case, it will
be in paring mode immediately
Connected
Connected
Disconnected
Pairing
Mode
Main unit L: Blue
light ashes →
Blue light and
Red light ash
alternatively
Main unit R: Blue
light ash slowly
Main unit LR:
Blue light ashes
slowly
Main unit LR:
Blue light ashes
slowly
Main unit LR:
Blue light ashes
slowly
Main unit L:
Blue light ashes
Disconnect
Pairing
complete
Connect
Disconnect the product from
your device (or disable
Bluetooth)
Pair this product from your
Bluetooth device. Please refer
to <Pairing and connecting>
After pairing is completed,
automatically connects if
Bluetooth of your Bluetooth
device is enabled*4
Music Playback
*5: If the button is pressed at the beginning of the song, it will skip to the previous
song.
Depending on your device, the operation may dierent or may not be
available.
Caution
■
This operation cannot be done with this
product. Operate with the connected device
PLAY / PAUSE
Volume UP / DOWN
Function Operation
Next song (skip to the
next song)
Previous song (return to
the beginning of the
currently playing song*5)
Press the multi function button on main unit
L or R twice in succession
Press the multi function button on main unit
L or R three times in succession
Press the multi function button on the
main unit L or R to operate play and pause
<The 1st Device>
<The 2nd or subsequent
devices>
1. Put the main unit L and R in the charging case.
2. Press and hold the multi function buttons of the main unit L and R for
approximately 13 seconds, and release when the blue indicator LED ashes.
3. Remove the main unit L and R from the charging case.
4. Please carry out pairing according to the procedure in How to Use
<Pairing and connecting>.
If the problem does not improve, please reset the main units. When the main
units are reset, all paired device information is erased and it will be in the state
at the time of purchase. Please pair again.
5
*1: When the main units and the charging case are fully charged, the max. playback time is 21
hours, where 1 time by the charged main units and 2 times by charging from the charging
case. Total 3 times.
※Specications and appearances are subject to change without prior notice for improvement.
※This device has a lithium ion battery built in. Usage time and battery charging time are based
on our test results. It depends on the usage environment.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Maxell Asia, Ltd. is under license. The names, logos, and
service marks are registered trademarks and trade names of maxell or their respective
owners.
Qualcomm® aptXTM audio is a product of Qualcomm Technologies International, Ltd.
aptXTM
is a trademark of Qualcomm Technologies International, Ltd., registered in the United States
and other countries, used with permission. Qualcomm® is a trademark of Qualcomm
Incorporated, registered in the United States and other countries, used with permission.
Maxell, Ltd.
30-13 Motoyoyogi-Cho, Shibuya-Ku, Tokyo 151-8527
8
Discard This Product
Disposal of rechargeable batteries in Japan
The built-in rechargeable battery can be recycled.
Do not remove the rechargeable battery yourself, please
contact our Customer Service Center.
Please refer to the JBRC website for information on
rechargeable battery collection / recycling and recycling
partners.
Caution
General
specication
Wireless
specication
Diameter 6mm
20~20,000Hz
Built-in rechargeable lithium ion battery
Continuous playback: approx. 7 hours,
Continuous standby: approx. 160 hours.
Charging case charge main units for
approx. 2 times*1
Main Unit: Approx. 2 hours
Charging Case: Approx. 3 hours
Main Unit: Approx. 4g x 2
Charging Case: Approx. 24g
Max. 10m
Bluetooth® Ver.5.0
A2DP, AVRCP, HFP, HSP
Sealed dynamic type
SCMS-T
Max. up to 7 units
Earpieces (S/M/L 2 units each)
※M size are attached to the main units.
Charging cable (USB-A-USB Micro-B
approx. 45cm) x1, instruction manual,
Quick start guide
Driver unit
Type
Power supply
Using time
Charging time
Waterproof level
Weight
Accessories
Communication
method
Communication
distance
Supported prole
Supported codecs
Supported content
protection
Multi-pairing
Audio frequency
response
7Specification
SBC,aptXTM
IPX5（Excluding the charging case）
Remove the main unit from
the charging case,
It will be in pairing mode in
about 15 seconds. Or, after
taking out the main unit,
Press and hold the multi
button of main unit L for about
3 seconds.
■Common function
Power On
Guidance
Sound
Power On Remove the main units from
the charging case
Main unit L:
Blue light ashes
Main unit R:
Display LampFunction Operation
<How to operate>
Blue light ashes
slowly
Main unit LR:
Blue light and
Red light ash
alternatively,
then red light
turns on and o
Main unit LR:
Red light ON
Power OFF Power OFF
Place the main units into the
charging case
Or, press and hold the multi
function button for
approximately 6 seconds
PA1899-01
Caution
*3: Password may be called passcode, passkey, PIN code, etc.
●Pairing mode lasts for approximately 3 minutes, and if it is not paired during
that time, the power will OFF.
● Password*3 input may be requested by your Bluetooth device. In that case,
you can pair it by entering "0000".
●This product can simultaneously store up to 7 paired Bluetooth devices.
When more than 8 pairings are attempted, the information of the 1st
stored Bluetooth device is erased and is replaced by the newly paired
device. If you want to use a Bluetooth device whose information has been
erased, please pair it again.
*2: If it does not connect automatically, please select "MXH-BTW510" from the list
displayed on your device.
1. When the main units are removed from the charging case, the main
units’ power turns on automatically, and the indicator LED start
ashing.
2. Activate Bluetooth on your Bluetooth device.
3. The earphone will connect automatically.*2 After connect, the display
lamp will ash blue slowly.
<Connection after the second time onward>
At the time of purchase,
M does not t your ears, please replace with the size S or size L earpiece in
the contents. If the earpiece does not t correctly, it will not be possible to seal
the ear hole with the earpiece, which may cause sound leakage and no bass to
be heard. Also, if you feel that the volume is low, there is a possibility of sound
leakage.
size M earpiece are attached to the main unit. If size
<Choosing an earpiece>
<Pairing and connecting>
5How to Use
In order to use this product, it is necessary to pair with your device.
Once pairing is done, you can connect without pairing again.
1. When the main units are removed from the charging case, the main
units power turns on automatically, and the indicator LED starts
ashing.
2. After a while, the LED of the main unit (L) starts to ash red and blue
alternately.*1 The LED of The main unit (R) will ash slowly in blue.
3. Enable Bluetooth function on your Bluetooth device.
For details on setting, please refer to the instruction manual of the
device.
4. Please select "MXH-BTW510" from the list displayed on your
Bluetooth device.
5. When pairing is completed, the blue indicator
LED ashes slowly.
*1: When pairing is performed for the rst time
after purchase, it will be in paring mode
immediately after the power is turned on.
When paring the second or subsequent
devices, it will be in pairing mode approx. 15
second after the power is turn on.
Caution After approx. 3 minutes without Bluetooth connection, the power will
turns o automatically.
*4: If it does not connect automatically, please select "MXH-BTW510" from the
Receiving a call
Ending a call
Press the multi function button on the main unit L or R
during a call
The other party disconnects the call
Function Operation
Depending on your device, the operation may dierent or may not be
available.
Caution
■Hands free call
Press the multi function button on the main unit L or R when
receiving a call
6
The power
does not
turn on
No sound
Troubleshooting
Unable to
charge
Sound is
distorted or
interrupted
Cannot hear
the voice on
the phone
・Insert the main units into the charging case and remove them
from the charging case
・Please charge the product
・Please pair and connect Bluetooth
・Power is not turned on. Put the main unit in the charging case and
take it out
・Check to see if the connected device supports Bluetooth prole
A2DP
・Check if the connected device is playing
・Please increase the volume of the Bluetooth device slowly
・Please reduce the volume of the connected device and this unit
・Please turn o the functions such as bass boost of connection device
・Remove any obstacles between the connection device and this unit
・Keep the connection device close to this unit
・Please keep away from radio equipment or microwave ovens
・Please press the multi function button to receive the call
・Make sure that the Bluetooth device supports HSP
・Insert the charging cable to the charging terminal completely
・Remove the main units from the charging case and place the main
units in again
・Remove dirt from the main units and charging case contacts
・Charge within the charge temperature range(5°C to 40°C）
Power ON
Pairing Mode
Remove the main unit
from the charging case, it will
be in paring mode immediately
Connected
Connected
Disconnected
Pairing
Mode
Main unit L: Blue
light ashes →
Blue light and
Red light ash
alternatively
Main unit R: Blue
light ash slowly
Main unit LR:
Blue light ashes
slowly
Main unit LR:
Blue light ashes
slowly
Main unit LR:
Blue light ashes
slowly
Main unit L:
Blue light ashes
Disconnect
Pairing
complete
Connect
Disconnect the product from
your device (or disable
Bluetooth)
Pair this product from your
Bluetooth device. Please refer
to <Pairing and connecting>
After pairing is completed,
automatically connects if
Bluetooth of your Bluetooth
device is enabled*4
Music Playback
*5: If the button is pressed at the beginning of the song, it will skip to the previous
song.
Depending on your device, the operation may dierent or may not be
available.
Caution
■
This operation cannot be done with this
product. Operate with the connected device
PLAY / PAUSE
Volume UP / DOWN
Function Operation
Next song (skip to the
next song)
Previous song (return to
the beginning of the
currently playing song*5)
Press the multi function button on main unit
L or R twice in succession
Press the multi function button on main unit
L or R three times in succession
Press the multi function button on the
main unit L or R to operate play and pause
<The 1st Device>
<The 2nd or subsequent
devices>
1. Put the main unit L and R in the charging case.
2. Press and hold the multi function buttons of the main unit L and R for
approximately 13 seconds, and release when the blue indicator LED ashes.
3. Remove the main unit L and R from the charging case.
4. Please carry out pairing according to the procedure in How to Use
<Pairing and connecting>.
If the problem does not improve, please reset the main units. When the main
units are reset, all paired device information is erased and it will be in the state
at the time of purchase. Please pair again.
5
*1: When the main units and the charging case are fully charged, the max. playback time is 21
hours, where 1 time by the charged main units and 2 times by charging from the charging
case. Total 3 times.
※Specications and appearances are subject to change without prior notice for improvement.
※This device has a lithium ion battery built in. Usage time and battery charging time are based
on our test results. It depends on the usage environment.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Maxell Asia, Ltd. is under license. The names, logos, and
service marks are registered trademarks and trade names of maxell or their respective
owners.
Qualcomm® aptXTM audio is a product of Qualcomm Technologies International, Ltd.
aptXTM
is a trademark of Qualcomm Technologies International, Ltd., registered in the United States
and other countries, used with permission. Qualcomm® is a trademark of Qualcomm
Incorporated, registered in the United States and other countries, used with permission.
Maxell, Ltd.
30-13 Motoyoyogi-Cho, Shibuya-Ku, Tokyo 151-8527
8
Discard This Product
Disposal of rechargeable batteries in Japan
The built-in rechargeable battery can be recycled.
Do not remove the rechargeable battery yourself, please
contact our Customer Service Center.
Please refer to the JBRC website for information on
rechargeable battery collection / recycling and recycling
partners.
Caution
General
specication
Wireless
specication
Diameter 6mm
20~20,000Hz
Built-in rechargeable lithium ion battery
Continuous playback: approx. 7 hours,
Continuous standby: approx. 160 hours.
Charging case charge main units for
approx. 2 times*1
Main Unit: Approx. 2 hours
Charging Case: Approx. 3 hours
Main Unit: Approx. 4g x 2
Charging Case: Approx. 24g
Max. 10m
Bluetooth® Ver.5.0
A2DP, AVRCP, HFP, HSP
Sealed dynamic type
SCMS-T
Max. up to 7 units
Earpieces (S/M/L 2 units each)
※M size are attached to the main units.
Charging cable (USB-A-USB Micro-B
approx. 45cm) x1, instruction manual,
Quick start guide
Driver unit
Type
Power supply
Using time
Charging time
Waterproof level
Weight
Accessories
Communication
method
Communication
distance
Supported prole
Supported codecs
Supported content
protection
Multi-pairing
Audio frequency
response
7Specification
SBC,aptXTM
IPX5（Excluding the charging case）
Remove the main unit from
the charging case,
It will be in pairing mode in
about 15 seconds. Or, after
taking out the main unit,
Press and hold the multi
button of main unit L for about
3 seconds.
■Common function
Power On
Guidance
Sound
Power On Remove the main units from
the charging case
Main unit L:
Blue light ashes
Main unit R:
Display LampFunction Operation
<How to operate>
Blue light ashes
slowly
Main unit LR:
Blue light and
Red light ash
alternatively,
then red light
turns on and o
Main unit LR:
Red light ON
Power OFF Power OFF
Place the main units into the
charging case
Or, press and hold the multi
function button for
approximately 6 seconds
Table of contents
Other Maxell Headphones manuals
Maxell
Maxell HP/NC-II User manual
Maxell
Maxell MXH-TC10 User manual
Maxell
Maxell TWDD-BK User manual
Maxell
Maxell MXH-BTW1000 User manual
Maxell
Maxell MXH-BTNF550 User manual
Maxell
Maxell Bass 13 User manual
Maxell
Maxell MXH-BTW2000 User manual
Maxell
Maxell Bass 13 EB2 User manual
Maxell
Maxell MXH-C120L User manual
Maxell
Maxell Solid EB-BT100 User manual
Maxell
Maxell MXH-BT600E User manual
Maxell
Maxell MXH-BTC14 User manual
Maxell
Maxell HP/NC-II Manual
Maxell
Maxell ANC1 User manual
Maxell
Maxell One User manual
Maxell
Maxell AIRLINK EB-ALBT140 User manual
Maxell
Maxell MXH-BT100 User manual
Maxell
Maxell MXH-C120L User manual
Maxell
Maxell MXH-BT600E User manual
