Maxell MXH-TC10 User manual

HANDFREE ALUMINIUM EARPHONES
MXH-TC10
Thank you for purchasing this Maxell product. Before use, please make sure to read this User Manual
and use the product correctly and safely. Please keep this User Manual carefully in suitable place.
Introduction
Disclaimer
●
●
Maxell shall not be responsible for any damage caused by fires, earthquakes, action of a
third party, any accidents, intended or unintended misuse or other usage under abnormal
conditions.
We assume no responsibility for any damage caused by any usage not described in this
User Manual.
We assume no responsibility for any damage caused by malfunction due to connection
with equipment and devices.
This User Manual may be subject to change without prior notice.
In order to improve the product, external appearance or part of the specifications may be
subject to change without prior notice.
About the User Manual
This product is not being designed to be any equipment or device which could be concerned
with human life such as medical device, nuclear device, astronomical device, transportation
device etc., nor equipment or devices which requires high reliability. In case this product
is used for the above equipment and/ or systems, Maxell do not responsible for any injuries
or fire accident cause by the failure of this product.
If it is handled incorrectly, it is assumed that the user may suffer death or
serious injury*1.
Warning
Warning
Caution If it is handled incorrectly, it is assumed that the user may suffer minor injury*2 or there
is a possibility that property damage*3 may occur.”
*2: Minor injury refers to hurt, burnt, electric shock, etc. which do not result in hospitalization or long-term
follow-up consultation
*3: Property damage refers broad damages to houses or properties and domestic animals/ pets.
*1: Severe injury is indicated by those that have after effects such as blindness, injury, burns (high temperature
burns/low temperature burns, chemical burns), electric shock, fracture, poisoning, etc. and those requiring
hospitalization or long-term regular hospital visits for treatment.
Examples of
Symbol
stands for prohibited actions when
handling the product.
stands for instruction which must be
followed.
Fire, electric shock, injury may
occur.
May cause traffic accident as hard to
hear surroundings.
If the cord is swallowed or tangled around the neck, it may cause
suffocation etc. In case of accident, seek medical attention immediately.
Safety Caution
1
2
Even while walking, using it in where it will be dangerous if surrounding sounds
cannot be heard (such as railway crossings, crosswalks, station platforms,
roadways, construction sites, etc.) can cause unexpected serious accidents.
User Manual
This product is Japanese specification. We assume no responsibility if use outside Japan.

Caution
Continuously listening to loud volume can result in overstimulation of ears.
It may affect the hearing. Furthermore, if the volume is raised too much from
the beginning, the sudden loud sounds may harm ears. Before using, please
reduce the volume of the connected device.
Continued usage may cause irritation or rash. If you feel an abnormality,
please discontinue use and seek medical attention.
The surface of equipment and parts may deteriorate, result in causing fire.
Please take extra care in closed automobile in summer, or it is under direct
sunlight or near a stove.
It may hurt your ear hole.
1.Choosing an earpiece
At the time of purchase, size M earpiece are attached to the main
unit. If size M does not fit your ears, please replace with the size S
or size L earpiece in the contents. If the earpiece does not fit
correctly, it will not be possible to seal the ear hole with the
earpiece, which may cause sound leakage and bass cannot be
heard. Also, if you feel that the volume is low, there is a possibility
of sound leakage.
How To Use
++
+Button
Controller
Button
RL
2.Connecting to a device
How to Use Remote Control
When replacing the earpiece, make sure that the earpiece is
fully inserted into earphone unit, if it is not firmly attached, the
earpiece may come off and remain in the ear. If it remains in the
ear, be careful not to push it further into the ear.
*
①Before putting on the earphones, turn
down the volume of the connected device.
②Wear the earphone with R on the right ear
and the earphone with L on the left ear. The
L/R is displayed on the outside of the
earphones.
③After putting on the earphones adjust the
volume of the connected device while
listening to the sound.
When removing the earphones from
your ears, pulling on the cord may cause
breakage of the wire. Please hold the
units carefully and remove them.
It may cause failure, malfunction
or deterioration.
Device
3.Wearing headphones
*1: Severe injury is indicated by those that have after effects such as blindness, injury, burns (high temperature
burns/low temperature burns, chemical burns), electric shock, fracture, poisoning, etc. and those requiring
hospitalization or long-term regular hospital visits for treatment.
3

https://www.maxell.jp/consumer/headphone_typec_compatibility-list.html
Specification
Earphone
Specification
16Ω
97±3dB/mW(@1kHz)
D/A Converter:
24bit/96kHz
Used unit:
Model:
Audio frequency
response:
Diameter 10mm
20~20,000Hz
Approx. 14.5g (including cord)
Sealed dynamic type
Earpieces (S/M/L 2 units each) ※M size
are attached to the main units.
Impedance:
Sensitivity:
Core Length:
Plug:
Approx. 1.2m
Weight:
Accessories:
Type-C
●Be sure to read the instruction manual of the connected device.
●Pulling on the cord may cause breakage of the wire. Please hold the plug or the units when handling.
●Avoid strong impact. It may cause failure or malfunction.
●Do not wind the cord around the device etc. It may cause breakage of the wire.
●Do not put the earphones in your trouser pocket etc. It may cause failure or malfunction.
●Do not place the product in a location, which is exposed to direct sunlight, or in a humid, dusty, oily
or steamy location. Also do not use the product where it may come in to contact with water. It may
cause failure or malfunction.
●If stained, wipe it with a soft, dry cloth.
●Wipe the plug part with a soft cloth occasionally. If it is dirty, the sound quality may deteriorate or
the sound may be interrupted.
●Please note that if the volume is set too loud, the sound will leak out and disturb other peoples.
●In dry places, static electricity may cause irritation to the ear.
●Earpieces can deteriorate with prolonged use or prolonged storage.
●If the earpiece becomes dirty, remove it from the main unit and hand wash with a diluted neutral
detergent. After cleaning, wipe off any moisture before use.
“Microphone functions such as incoming call responsed by remote control.
It may not be supported depending on the smartphone specications and operation
system version.
Check the compatibility status of the device from following website "
Troubleshooting
Handling Caution
Cannot hear any sound
The volume is very low
The sound is distorted
The sound is interrupted
The sound has noise
Unable to answer/
hang up the phone
●Check if the connected device is compatible.
●Check the connection between the earphones and the device.
●Make sure that the device connected to the earphones is turned on.
●Try increasing the volume of the connected device.
●Check the size of the earpieces.
●Try decreasing the volume of the connected device.
●Check the connection between the earphones and the device.
●Try changing the sound source you are listening to.
●Check if the connected device is compatible.
●Check the connection between the earphones and the smartphone.
4
5
6

Microphone
Specification
40dB (±2dB)
100Hz~8,000Hz
Model: Condenser Type
Directivity:
Sensitivity:
Frequency Response:
Omni-Directional
The specifications and appearance of this unit are subject to
change without notice for performance improvement.
Maxell, Ltd.
30-13 Motoyoyogi-Cho, Shibuya-Ku, Tokyo 151-8527
●Be sure to read the instruction manual of the connected device.
●Pulling on the cord may cause breakage of the wire. Please hold the plug or the units when handling.
●Avoid strong impact. It may cause failure or malfunction.
●Do not wind the cord around the device etc. It may cause breakage of the wire.
●Do not put the earphones in your trouser pocket etc. It may cause failure or malfunction.
●Do not place the product in a location, which is exposed to direct sunlight, or in a humid, dusty, oily
or steamy location. Also do not use the product where it may come in to contact with water. It may
cause failure or malfunction.
●If stained, wipe it with a soft, dry cloth.
●Wipe the plug part with a soft cloth occasionally. If it is dirty, the sound quality may deteriorate or
the sound may be interrupted.
●Please note that if the volume is set too loud, the sound will leak out and disturb other peoples.
●In dry places, static electricity may cause irritation to the ear.
●Earpieces can deteriorate with prolonged use or prolonged storage.
●If the earpiece becomes dirty, remove it from the main unit and hand wash with a diluted neutral
detergent. After cleaning, wipe off any moisture before use.
Table of contents
Other Maxell Headphones manuals

Maxell
Maxell MXH-C120L User manual

Maxell
Maxell ANC1 User manual

Maxell
Maxell MXH-BT100 User manual

Maxell
Maxell MXH-BTW1000 User manual

Maxell
Maxell One User manual

Maxell
Maxell MXH-BTNF550 User manual

Maxell
Maxell MXH-BTW510 User manual

Maxell
Maxell Bass 13 EB2 User manual

Maxell
Maxell TWDD-BK User manual

Maxell
Maxell MXH-BTW2000 User manual

Maxell
Maxell HP/NC-II User manual

Maxell
Maxell MXH-BTC14 User manual

Maxell
Maxell HP/NC-II Manual

Maxell
Maxell MXH-C120L User manual

Maxell
Maxell Bass 13 User manual

Maxell
Maxell MXH-BT600E User manual

Maxell
Maxell Solid EB-BT100 User manual

Maxell
Maxell MXH-BT600E User manual

Maxell
Maxell AIRLINK EB-ALBT140 User manual