Maxtor MaXLine III 7B250S0 User instructions

QUICKSPECS
MaXLine III SATA Hard Disk Drive Family
CAPACITIES:
MODEL ACT CYLS HDS:SECT MAX CYLS MAXLBA GB CAPACITY
7B250S0 486,344 16:63 16,383 490,234,752 250GB
7B300S0 588,422 16:63 16,383 593,129,376 300GB
SATA = Serial ATA
Attaching SATA Power Cables:
Key Features:
• SATA interface
• Burst Data Transfer Speeds
up to 150 MB/sec
• Up to 300GB capacities
• 9.3 ms average seek time
• 16MB Cache Buffer
• 100% FDB Motors
• 7200 RPM
Misc Drive Info:
For more information on step-by-step
installation procedures, troubleshooting
procedures and more go to the Maxtor.com
Knowledge Base.
GB = 1 billion bytes. Total accessible
capacity varies depending on operating
environment.
PLEASE NOTE: Unlike standard ATA drives, Serial ATA drives DO NOT
require the use of jumpers to configure the drive. Please disregard any
references to jumper settings and Master, Slave and Cable Select
configurations in the Maxtor Installation Guide.
SATA Interface Cable Requirements:
7-pin Serial ATA interface cable (Gen. 1- or Gen. 2-compliant) up to 1 meter in length.
Document #: 42104 Rev: 00
Date: 6/21/04