Maxxair HVFF10 Mini Turbo User manual

Ventamatic, Ltd. P.O. Box 728, Mineral Wells, TX 76068-0728 1-800-433-1626 Fax: [phone] www.BVC.com
QTY Printed
SKU / Document #
©2020 VENTAMATIC, LTD. 2020 HVFF10 INS MANUAL 0420/#1149
2020 HVFF10 INS Manual #1149
HVFF10 Mini Turbo
Owner’s Manual
SAFETY
This safety alert symbol is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Danger indicates an imminently hazardous situation, which,
if not avoided, will result in death or serious injury.
DANGER
Warning indicates a potentially hazardous situation, which,
if not avoided, could result in death or serious injury.
WARNING
Caution indicates a potentially hazardous situation, which,
if not avoided, may result in minor or moderate injury.
CAUTION
Used to indicate an electrical shock or electrocution hazard.
ELECTRICAL
SHOCK
SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING:

Ventamatic, Ltd. P.O. Box 728, Mineral Wells, TX 76068-0728 1-800-433-1626 Fax: [phone] www.BVC.com
2
2
VENTAM ATIC, LTD . • 100 WASHINGTON AVE MINERAL WELLS, TX 76067 • PHONE [phone] • WWW.BVC.COM
READ AND SAVE THESE INSTRUCTIONS.
ASSEMBLY AND OPERATING INSTRUCTIONS
CAUTION:
Read and follow all instructions before operating fan.
Do not use fan if any part is damaged or missing.
WARNING:
To reduce the risk of fire or electrical shock, do not expose to water or rain.
To reduce the risk of fire or electrical shock, do not use this fan with any solid state speed control device.
This appliance has a 3-prong plug. To reduce the risk of electrical shock, this plug is intended to fit in an outlet only one way.
If this does not fit the outlet, contact a qualified electrician. Do not attempt to bypass this procedure.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to
avoid a hazard.
RULES FOR SAFE OPERATION:
Never insert fingers or any other objects through the grille guard when fan is in operation.
Disconnect the fan when moving from one location to another.
Disconnect the fan when removing guards for cleaning.
Be sure fan is on a stable, flat surface when in operation.
DO NOT use fan in windows. Rain and moisture may create electrical hazard.
CAUTION: Do not alter the Fan’s assembly.
WARNING: Be sure FRONT and REAR GUARD screw are completely screwed down in locking position before operation.
OPERATING INSTRUCTIONS
BASE ASSEMBLY:
1. Align one washer assembly with pre-drilled hole on side of
fan housing.
2. Place base arm against washer assembly, aligning base hole
with washer assembly hole.
3. Insert knob and tilt nut assembly through base hole and into
washer, turning clockwise until tight.
4. Repeat for other side.
How To Adjust Tilt
1. Use knob to loosen tilt nut by turning counter-clockwise.
2. Adjust fan head to tilt you want.
3. Tighten the tilt nut by turning clockwise.
SPEED CONTROL: Rotate SWITCH to LOW (1), MEDIUM (2) AND HIGH (3) speeds for respective air velocity. It is normal
for the motor to feel warm to touch after continuous operation. This fan features a thermal cutoff that will automatically shut off
should it overheat for any reason. If this happens, immediately unplug the fan from the outlet.
Knob
Washer
CAUTION
WARNING
CAUTION
WARNING
CAUTION: Do not alter the Fan’s assembly.
WARNING: Be sure FRONT and REAR GUARD screw are completely screwed down in locking
position before operation.
How to Adjust Tilt:

Ventamatic, Ltd. P.O. Box 728, Mineral Wells, TX 76068-0728 1-800-433-1626 Fax: [phone] www.BVC.com
3
VENTAM ATIC, LTD . • 100 WASHINGTON AVE MINERAL WELLS, TX 76067 • PHONE [phone] • WWW.BVC.COM
3
TO INSTALL AS WALL FAN (hardware not provided)
WARNING:
Mount fan on a wooden wall only.
To reduce the risk of electric shock and personal injury,
ensure the location for all mounting is able to support this fan.
Total weight of fan is 18 lbs (8 kg).
This fan is recommended to be mounted by a qualified electrician.
CLEANING
WARNING: Unplug from electrical supply source before cleaning.
After servicing, any safety device (including grilles and blades) must be reinstalled or remounted as previously installed:
Use soft damp cloth to clean. Then wipe with dry cloth.
Do not use a cleaning solution that is harmful to paints or plastics.
Do not bend the blades.
The motor bearings are permanently sealed and do not require additional lubrication.
WARNING: This product is not intended for use by persons including children with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the
product by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product.
No.
Part Name
No.
Part Name
1
KNOB
7
FAN BLADE
2
SWITCH BOX
8
METAL DRUM
3
ON/OFF SWITCH
9
FRONT GRILLE
4
SWITCH BOX
10
WASHER
5
MOTOR
11
KNOB
6
REAR GRILLE
12
STAND
WARNING
WARNING
WARNING: Unplug from electrical supply source before cleaning.
After servicing, any safety device (including grilles and blades) must be reinstalled or remounted
as previously installed:
• Use soft damp cloth to clean. Then wipe with dry cloth.
• Do not use a cleaning solution that is harmful to paints or plastics.
• Do not bend the blades.
• The motor bearings are permanently sealed and do not require additional lubrication.
WARNING: This product is not intended for use by persons including children with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the product by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the product.

Ventamatic, Ltd. P.O. Box 728, Mineral Wells, TX 76068-0728 1-800-433-1626 Fax: [phone] www.BVC.com
©2020 VENTAMATIC, LTD. 2020 HVFF10 INS MANUAL 0420/#1149
VENTAMATIC, Ltd.
LIMITED WARRANTY STATEMENT
This warranty is underwritten by Falco Insurance Company and is extended to the original
retail purchaser of this model or, if this unit is purchased and requires installation by a building
contractor, to the original owner of the home. No subsequent purchaser of the unit or of a home
in which it is installed is entitled to any of the benefi ts of this warranty.
This product is warranted against defects in materials and workmanship for a period of one (1)
year from the date of original retail purchase. No other parts or components are warranted.
There is no warranty for defects caused by abuse, faulty installation, or the like.
Repairs or replacement parts supplied under this warranty are warranted only for the period of
this warranty; that is, one (1) year from the date of the original retail purchase of the unit.
In the event of a defect or malfunction, we will replace or repair the defective part or component
only and return the new or repaired part to you freight prepaid.
You must bear all other expenses incurred in obtaining repairs, including labor required for fi eld
repair or replacement, and the cost of shipping the defective part to us. You must also bear the
cost of repair to or replacement of any part or component and the shipping charges incurred
for the repair or replacement and return to you of any part or component not covered by this
warranty, including parts or components damaged by you.
The company reserves the right to demand and receive written evidence of the date of purchase
before undertaking its obligations under this warranty. The right to demand and receive written
evidence of date of purchase extends to all licensed dealers of Ventamatic, Ltd. products.
You should, therefore, retain your sales slip and attach a copy of it to the warranty claim.
To start a warranty claim you must:
Contact Ventamatic, Ltd.
An RGA (Returned Goods Authorization) form is required for returns to the factory
to ensure your return can be processed effi ciently and quickly. Please contact
Ventamatic, Ltd. toll-free at 800-433-1626 or via web at www.bvc.com to obtain an
RGA and follow the instructions given.
There is no informal dispute settling mechanism available in the event of a controversy involving
this warranty.
Any and all implied warranties which may exist terminate upon the expiration of this warranty
one (1) year from the date of the original retail purchase. Some states do not allow limitations on
how long an implied warranty lasts, so this limitation may not apply to you.
Ventamatic, Ltd. is not liable to you for incidental or consequential damages arising out of defect
or malfunction of a unit or its installation or out of any alleged breach of this warranty. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so this
limitation may not apply to you.
This warranty gives you specifi c legal rights and you may also have other rights which may vary
from state to state.
rev. 04/19