Maxxdry Traveler 02151 User manual

IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs and maintenance (other than those listed in this manual)
should be performed by authorized service centers or other qualified service organizations, always using
identical replacement parts.
ACCESSORIES:
No recommended accessories for use with your MaxxDryVT™ are available at this time.
CAUTION: The use of any accessory or attachment not recommended
may be hazardous and may void warranty.
SERVICE INFORMATION:
MaxxDry™Service Center is staffed with trained personnel to provide customers with efficient and reliable
product service. Whether you need technical advice, repair or genuine factory replacement parts, contact
customer service at 888-330-9452.
FULL ONE (1) YEAR USE WARRANTY:
MaxxDry™(U.S.) warrants this product for One (1) Year against any defects in material or workmanship.
The defective product will be replaced or repaired at no charge in either of two ways:
The first, which will result in exchanges only, is to return the product to the retailer from whom it was
purchased (provided the store is a participating retailer). Returns should be made within the time period
of the retailer’s policy for exchanges (usually 30 days after the sale). Proof of purchase may be required.
Please check with the retailer for their specific return policy regarding returns.
The second option is to take or send the product (prepaid) to a MaxxDry™authorized service center for
repair or replacement at our discretion. Proof of purchase, store name and date of purchase may be
required.
This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have
other rights which vary from state to state. Should you have any questions, contact the service center. This
product is not intended for commercial use.
THE FOLLOWING WILL NOT BE COVERED UNDER WARRANTY:
- Any modification to MaxxDryVT™
- Product has been misused or improperly cared for
- Products over One (1) Year from date of original purchase
- Warranty request without original receipt
- Repairs done by anyone other than MaxxDry™ or a MaxxDry™ authorized repair facility
In consideration of the above promises by MaxxDry™, the buyer agrees to and accepts the following conditions:
1. That this warranty is in lieu of all other warranties, expressed or implied.
2. That all warranties OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
EXCLUDED OR WAIVED.
3. That the buyer’s sole remedy shall be to obtain replacement of the product free of charge from
MaxxDry™provided any and all warranty defects fall within the warranty period and meets all
warranty provisions.
4. That this remedy is in lieu of all other remedies or claims for damages, consequential or otherwise,
which the buyer may have against MaxxDry™.
MaxxDry™ Traveler
Portable Footwear Warmer & Dryer
02151
INSTRUCTION MANUAL
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-800-446-7587
IF YOU SHOULD HAVE A QUESTION OR EXPERIENCE
A PROBLEM WITH YOUR MaxxDry™ PRODUCT CALL
1-800-446-7587
Before you call, please have the following information available: Product MODEL number which is located below the UPC code on the
outside of the product box and the store receipt with purchase date. In most cases, a MaxxDry™ representative can resolve the problem
over the phone or via email and if not, can direct you to an authorized service center. If you have suggestions or comments, please
send them via email to: [email protected]. Your feedback is vital to MaxxDry™.
SAVE THIS MANUAL FOR FUTURE REFERENCE
March 2012
Maxxdry.com

GENERAL SAFETY RULES
WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
AREA OF USE:
• Keep surrounding area clean and well lit. Cluttered areas invite accidents.
• Do NOT operate in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
ELECTRICAL SAFETY:
• Do NOT operate in standing water.
• Do NOT cut-off or restrict air circulation.
•Do NOT expose Traveler to rain or snow.
•Do NOT place Traveler against toe of the shoe or boot; leave one inch of free space.
• Use of attachments not recommended or sold by MaxxDry™ may result in a risk of fire, electric shock,
or injury to persons.
• To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting unit.
• Make sure the cord is positioned so that it will not be stepped on, tripped over or otherwise subjected
to damage or stress.
• An extension cord should not be used unless absolutely necessary. Use of improper extension cord
could result in a risk of fire, electric shock or electrocution.
• Two-wire cords can be used with 2-wire or 3-wire extension cords. Only round jacketed extension
cords should be used and we recommend that they be listed by Underwriters Laboratories (U.L.). If the
extension cord is to be used outside, it must be suitable for outdoor use. Any cord marked for outdoor
use can also be used for indoor use. The letters “W” or “WA” on the cord jacket indicate that the cord
is suitable for outdoor use.
• An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety and to
prevent loss of power and overheating. The smaller the gauge number of the wire, the greater the
capacity of the cable; that is, 16 gauge has more capacity than 18 gauge. When using more than 1
extension to make up the total length, be sure each extension contains at least the minimum wire size.
OPERATING INSTRUCTIONS:
1. Plug the MaxxDryVT™into any standard 120 Volt 60 Hz electrical outlet or any standard 12-Volt
automotive receptacle using the proper power cord which is included. Slide carefully into footwear
being cautious not to restrict or block air circulation.
2. Do NOT trap, smother, pinch or suffocate the air circulation into or out of footwear with clothing or any
other substance. This may cause overheating.
3. Do NOT force the MaxxDryVT™into smaller footwear. The unit will work by placing into shoe or boot
opening without being pushed all the way in.
4. Leave adequate space at entrance to footwear, being careful not to restrict or block air flow.
5. Leave one inch of free space between MaxxDryVT™ and the toe end of the shoe or boot.
HELPFUL TIPS:
1. Make sure not to pinch or otherwise suffocate air circulation when placing unit into footwear. Loosen
laces and pull footwear tongue outward to help open breathing space.
2. Footwear should be dried after every use to help prevent bacteria and fungus growth, which is the
primary cause of footwear odor.
3. Smaller footwear and garments will dry quicker than larger items.
4. Your energy efficient MaxxDryVT™heats to a gentle temperature, using Thermal Convection technology
to quietly dry wet garments, but it does not generate a forced air movement. At first you may suspect
the unit is not operating properly. We recommend placing the unit into your boot or shoe for 15 to 20
minutes, the heat will be felt when the unit is placed in footwear and is in service.
OPERATION TIME:
• Drying time varies depending upon extent of moisture as well as temperature and humidity.
• We recommend a minimum of 1 hour every time your shoes or boots are used.
MAINTENANCE:
Use only mild soap and a damp cloth to clean the MaxxDryVT™. Never immerse any part of unit into liquid.
MaxxDry.com MaxxDry.com

GENERAL SAFETY RULES
WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
AREA OF USE:
• Keep surrounding area clean and well lit. Cluttered areas invite accidents.
• Do NOT operate in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
ELECTRICAL SAFETY:
• Do NOT operate in standing water.
• Do NOT cut-off or restrict air circulation.
• Do NOT expose MaxxDryVT™ to rain or snow.
• Do NOT place MaxxDryVT™ against toe of the shoe or boot; leave one inch of free space.
• Use of attachments not recommended or sold by MaxxDry™may result in a risk of fire, electric shock,
or injury to persons.
• To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting unit.
• Make sure the cord is positioned so that it will not be stepped on, tripped over or otherwise subjected
to damage or stress.
• An extension cord should not be used unless absolutely necessary. Use of improper extension cord
could result in a risk of fire, electric shock or electrocution.
• Two-wire cords can be used with 2-wire or 3-wire extension cords. Only round jacketed extension
cords should be used and we recommend that they be listed by Underwriters Laboratories (U.L.). If the
extension cord is to be used outside, it must be suitable for outdoor use. Any cord marked for outdoor
use can also be used for indoor use. The letters “W” or “WA” on the cord jacket indicate that the cord
is suitable for outdoor use.
• An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety and to
prevent loss of power and overheating. The smaller the gauge number of the wire, the greater the
capacity of the cable; that is, 16 gauge has more capacity than 18 gauge. When using more than 1
extension to make up the total length, be sure each extension contains at least the minimum wire size.
OPERATING INSTRUCTIONS:
1. Plug the Traveler into any standard 120 Volt 60 Hz electrical outlet or any standard 12-Volt
automotive receptacle using the proper power cord which is included. Slide carefully into footwear
being cautious not to restrict or block air circulation.
2. Do NOT trap, smother, pinch or suffocate the air circulation into or out of footwear with clothing or any
other substance. This may cause overheating.
3. Do NOT force the Traveler into smaller footwear. The unit will work by placing into shoe or boot
opening without being pushed all the way in.
4. Leave adequate space at entrance to footwear, being careful not to restrict or block air flow.
5. Leave one inch of free space between Traveler and the toe end of the shoe or boot.
HELPFUL TIPS:
1. Make sure not to pinch or otherwise suffocate air circulation when placing unit into footwear. Loosen
laces and pull footwear tongue outward to help open breathing space.
2. Footwear should be dried after every use to help prevent bacteria and fungus growth, which is the
primary cause of footwear odor.
3. Smaller footwear and garments will dry quicker than larger items.
4. Your energy efficient Traveler heats to a gentle temperature, using Thermal Convection technology
to quietly dry wet garments, but it does not generate a forced air movement. At first you may suspect
the unit is not operating properly. We recommend placing the unit into your boot or shoe for 15 to 20
minutes, the heat will be felt when the unit is placed in footwear and is in service.
OPERATION TIME:
• Drying time varies depending upon extent of moisture as well as temperature and humidity.
• We recommend a minimum of 1 hour every time your shoes or boots are used.
MAINTENANCE:
Use only mild soap and a damp cloth to clean the Traveler. Never immerse any part of unit into liquid.
MaxxDry.com MaxxDry.com

IMPORTANT:
To assure product SAFETY and RELIABILITY, repairs and maintenance (other than those listed in this manual)
should be performed by authorized service centers or other qualified service organizations, always using
identical replacement parts.
ACCESSORIES:
No recommended accessories for use with your Traveler are available at this time.
CAUTION: The use of any accessory or attachment not recommended
may be hazardous and may void warranty.
SERVICE INFORMATION:
MaxxDry™ Service Center is staffed with trained personnel to provide customers with efficient and reliable
product service. Whether you need technical advice, repair or genuine factory replacement parts, contact
customer service at 1-800-446-7587.
FULL ONE (1) YEAR USE WARRANTY:
MaxxDry™ (U.S.) warrants this product for One (1) Year against any defects in material or workmanship.
The defective product will be replaced or repaired at no charge in either of two ways:
The first, which will result in exchanges only, is to return the product to the retailer from whom it was
purchased (provided the store is a participating retailer). Returns should be made within the time period
of the retailer’s policy for exchanges (usually 30 days after the sale). Proof of purchase may be required.
Please check with the retailer for their specific return policy regarding returns.
The second option is to take or send the product (prepaid) to a MaxxDry™ authorized service center for
repair or replacement at our discretion. Proof of purchase, store name and date of purchase may be
required.
This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have
other rights which vary from state to state. Should you have any questions, contact the service center. This
product is not intended for commercial use.
THE FOLLOWING WILL NOT BE COVERED UNDER WARRANTY:
- Any modification to Traveler
- Product has been misused or improperly cared for
- Products over One (1) Year from date of original purchase
- Warranty request without original receipt
- Repairs done by anyone other than MaxxDry™ or a MaxxDry™ authorized repair facility
In consideration of the above promises by MaxxDry™, the buyer agrees to and accepts the following conditions:
1. That this warranty is in lieu of all other warranties, expressed or implied.
2. That all warranties OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
EXCLUDED OR WAIVED.
3. That the buyer’s sole remedy shall be to obtain replacement of the product free of charge from
MaxxDry™ provided any and all warranty defects fall within the warranty period and meets all
warranty provisions.
4. That this remedy is in lieu of all other remedies or claims for damages, consequential or otherwise,
which the buyer may have against MaxxDry™.
MaxxDryVT™Ventilator™
Shoe & Boot Dryer and Warmer - MX00300
INSTRUCTION MANUAL
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-888-330-9452
IF YOU SHOULD HAVE A QUESTION OR EXPERIENCE
A PROBLEM WITH YOUR MaxxDry™ PRODUCT
CALL 1-888-330-9452
Before you call, please have the following information available: Product MODEL number which is located below the UPC code on the
outside of the product box and the store receipt with purchase date. In most cases, a MaxxDry™ representative can resolve the problem
over the phone or via email and if not, can direct you to an authorized service center. If you have suggestions or comments, please send
them via email to: [e-mail]. Your feedback is vital to MaxxDry™.
SAVE THIS MANUAL FOR FUTURE REFERENCE
March 2012
Maxxdry.com