Mayline Medina MNRS User manual

CALL 1-800-822-8037 FOR ASSISTANCE
ASSEMBLY INSTRUCTIONS
Model No. MNRD
P/N MNRS RE 1 02/27/15 www.mayline.com
Medina Series
Reception Desk & Glass Counter
TM
PARTS LIST
1
Name Part Qty.
Spare
Qty
Spare
Qty
Qty.
PartName
A1 10
HB
Wood Dowel
REALS004
B1 25
Cam Post
REALS003
C 41
D 41
Cam Sticker
REALS102**
E 8
Mntg Bracket
REALS088
F 32
Ø4 x 20mm Black
REALS267
G 5
Stand-off
REALS086
H 2
Grommet
REALS087
Cam Lock
REALS001
1
1
1
I8
Leveler
REALS429
HB
HB HB
HB HB
HB HB
HB
HB
J8
Double Cam Post
REALS430
HB
MNRSHB
HARDWARE
Items with HB are in hardware box.
**Denotes Color Code

2
PARTS LIST
Name Part Qty. Qty. PartName
Top
MNRDT**
K 1
L1P1
Right Side Panel
MNRDE**
Q1
R1
Left Modesty Panel
MNRDTL**
Left Side Panel
MNRDE**
Glass Counter
NRDC
M 1
Right Modesty Panel
MNRDTM**
N1
Center Modesty Panel
MNRDTN**
O 2
Metal Spacers
MNRDTO**
3
IMPORTANT!
Review ALL instructions before beginning assembly. These
instructions are provided to avoid problems that may occur from
improper assembly or installation. Mayline and/or its distributor
are not responsible for failure resulting from improper assembly
or installation of this product. Moreover, all warranties are void
for failure to follow these assembly instructions.
1
Install Cam Posts (B) into Side Panels (P & Q). Insert Cams (C) to inside of the Side Panels
(P & Q). Insert Cams (C) in the underside of the Top (K). Install Levelers (I) into threaded
inserts in underside of Side Panels (P & Q).
**Denotes Color Code
NOTE:
1 .
Reception Top & Modesty Panels
packed in one carton -
MNRDT
2 .
Reception End Panels
packed in one carton -
MNRDE
3 .
Reception Counter
packed in one carton -
NRDC

45
2
Insert Wood Dowels (A) into Top (K). Insert Cams (C) in the underside of the Top (K).
Install Cam Posts (B) to the inside of the Side Panels (P & Q). Attach Top (K) and Side
Panels (P & Q) by turning Cams (C). Apply Cam Stickers (D) to Cams (C) of Top (K).
NOTE: The arrow on the face of the Cam (C) should
point towards the Cam Post (B) for proper alignment.
3
Install Double Cam Posts (J) into Metal Spacers (O). Attach Modesty Panels (L & M & N)
and Metal Spacers (O) by turning Cams (C). Apply Cam Stickers (D) to Cams (C) of
Modesty Panels (L & M & N). Install Levelers (I) into threaded inserts in underside of
Modesty Panels (L & M & N).
NOTE: The arrow on the face of the Cam (C) should point
towards the Double Cam Post (J) for proper alignment.

67
4
Attach Top (K) and Side Panels (P & Q) and Modesty Panels (L & M & N) by turning Cams
(C). Apply Cam Stickers (D) to Cams (C) of Top (K) and Side Panels (P & Q).
6
5
Attach Mntg Bracket (E) to the Top (K) and Side Panels (P & Q) & Modesty Panels (L & M
& N) using Screws (F).
NOTE: The arrow on the face of the Cam (C) should
point towards the Cam Post (B) for proper alignment.
Install Cam Posts (B) to inside of the Glass Counter (R). Place Glass Counter (R) onto
Side Panels (P & Q) and Modesty Panels (L & M & N) and lock in place by turning Cams
(C). Apply Cam Stickers (D) onto Cams (C) of Side Panels (P & Q) and Modesty Panels
(L & M & N). Insert Grommets (H) into Top holes.
7
NOTE: The arrow on the face of the Cam (C) should
point towards the Cam Post (B) for proper alignment.
Finished the assembly of the Reception Desk.

8
8
Attach MNRRHB to the Reception and Reception Return using Screws.