
Location of terminal block on electric
models and power supply cord on gas
models, except for Canadian models.
41"
(104.2 cm)
38
3
/
16
"
(97 cm)
39
5
/
32
"
(99.5 cm)
15
/
16
"
(2.4 cm)
Gas manifold
connection
71
1
/
2
"
(181.6 cm)
13
1
/
2
"
(34.3 cm)
5"
(12.7 cm)
5
1
/
2
"
(14 cm)
27
3
/
16
"
(69.1 cm)
Location of
washer water
valve connections
3
/
8
" min.
(.95 cm)
Exit location of
washer drain hose
27
1
/
2
"
†
(69.9 cm)
Dryer
Washer
5
/
8
"
(1.6 cm)
3
/
4
"
(1.9 cm)
1
1
/
8
"
(2.9 cm)
27
1
/
2
"
†
(69.9 cm)
39
11
/
32
"
(79.9 cm)
6
27
/
32
"
(17.4 cm)
Optional
side vent
location
(kit required)
13
1
/
2
"
(34.3 cm)
www.maytagcommerciallaundry.com
†Additional depth with venting will take from 11⁄8" to 7"
(2.9 cm to 17.9 cm) of depth depending on the vent
method used.
1/06
OUR
COMMITMENT
TO DEPENDABLE QUALITY
At Maytag, we believe durable goods should
remain just that. That’s why every Maytag®product
is constructed of the highest-quality materials and
with the utmost in precision craftsmanship. It’s
also why we stand behind our equipment with
solid service and support from our professional
Maytag laundry suppliers. Simply put, when you
choose Maytag®products, you ensure your peace
of mind.
Maytag®Energy Advantage™Stack Washer/Dryer
MICROPROCESSOR COIN-DROP
Energy Advantage™
Stack Washer/Dryer
STACKED UNIT SPECIFICATIONS
MODEL
MLE/MLG19PD
WASHER SPECIFICATIONS
MOTOR
120V, 60 Hz, variable-speed, reversible, high-efficiency, switched reluctance
•
Export models — 220 – 240V, 50 Hz
•
HP (kw) —wash/spin
1/4
(.19)/
1/2
(.38)
CAPACITY
Cu. ft. (cu. m)
2.9 (.08)
INLET — ft. (m) 4 (1.22)
DRAIN HOSE LENGTH — in. (cm) 42 (109.7)
APPROXIMATE WATER USAGE
— gal. (liters)
Factory preset hot cycle average, hot water 5 (18.9)
Factory preset warm cycle average, hot water 2
1/2
(9.5)
Factory preset average, overall 18 – 21(68.1 – 79.5)*
DRYER SPECIFICATIONS
MOTOR
120V, 60 Hz, single-phase, thermoprotected against overload, auto-reset
•
Export models — 220 – 240V, 50 Hz
•
HP (kw)
1/4
(.19)
CAPACITY — cu. ft. (cu. m) 6 (.17)
AIRFLOW
Domestic models — cfm (cmm) 220 (6.2)
Export models — cfm (cmm) 180 (5)
EXHAUST DUCT DIAMETER — in. (cm) 4 (10.2)**
NICHROME HELIX COIL HEATING ELEMENT (MLE models)
•
ELECTRICAL REQUIREMENTS
Approximate dryer draw — watts 5,900
Approximate overall draw — watts 6,300
Approximate export dryer draw — watts 4,800
Approximate export overall draw — watts 5,450
FUSE REQUIREMENTS
MLE model — amps 30
MLG model — amps 15
MLG export model — amps 10
SINGLE-PORT BURNER WITH AUTOMATIC ELECTRIC IGNITION (MLG models)
•
GAS RATING (MLG models)
MLG model — BTU/hr. (kcal/hr.) 24,000 (6,048)
MLG export model — BTU/hr. (kcal/hr.) 20,000 (5,040)
AUTOMATIC PRESSURE REGULATOR (MLG models)
•
ADJUSTABLE LEVELING LEGS
•
COLOR
White
•
APPROXIMATE WEIGHT
Crated/uncrated — lbs. (kg) 335 (152)/303 (137)
* If optional additional rinse is used, add 5 gallons (18.9 liters); not dependent on incoming pressure or time.
** Use a minimum of 4" (10.2 cm) -diameter rigid aluminum or rigid galvanized-steel duct. Never use plastic, nonmetal
or combustible duct.
See specific instructions for proper installation. Because of continuous product improvement, Maytag reserves the right to change
specifications without notice
.