Mazi H-7200 User manual

New Standard of Premium Digital Doorlock
Digital Door Lock
User Manual
New Concept PUSH PULL
Digital Doorlock
Door-opening function
with the use of password, card
Fire safety function
External double locking device
You can use your password and card key
conveniently and freely make settings
and changes.
It operates at a certain heat(around 65
degree Celsius) in case of re, which may
somewhat vary by installation
environment.
While you are out for long hours, opera-
tion of the indoor buttons can be stopped,
through which theft through the
milk drop is prevented.
Connection to home network
system(optional)
Door-opening is possible indoors through
a connection to the remote controller or
wireless transmitter.
Door open function
using ngerprint
Alarm function in case
of housebreaking and theft
Door-opening is possible indoors through
a connection to the remote controller or
wireless transmitter. (H-7290 Exdusive use)
If a wrong password is entered 5 or more
times, all the operation is stopped for 30
seconds, and forced door-opening
results in an alarm sounding.
Self-diagnosis function
If is safe from the risk of loss, theft, and
hacking by using the ngerprint as
authentication means.
Premium Smart Digital Doorlock
Be sure to make door
open manually
in emergency case
This product can be
damaged when the
door lock gets broken
ENTECS
Premium Smart Digital Doorlock
•Distributor : ENTECS Co., Ltd.
•Models : H-7200, H-7290
•Adress : #126, 19, Gosan-ro, Gunpo-si, Gyeonggi-do, Korea
•Manufacture country : Made in Korea
•Website : www.entecs.kr
H-7200 / Main key H-7290 / Main key
Opening method : 2-Way
Password + Card
Opening method : 3-Way
Password + Card + Fingerprint
• Distributor : ENTECS.CO., LTD.
• For problems due to condensation or with installation,
you must pay for the services.
• In the event you have forgotten passwords, or have lost a card /a manual key,
you must pay for the services.
※ To receive our full warranty services, pleases make an entry of all the items
in a quality assurance.
※ If you do not make the entry, you must pay even during our warranty period.
※ In the event of malfunctions due to condensation and moisture, you must
pay for warranty services.
CAUTIONS
H-7200

3
01 General Information ㆍ 3
02 Precautions ㆍ 4
03 How to use ㆍ 5
04 Product specication ㆍ12
05 Product Features ㆍ 13
06 Warranty Service for Product Defects ㆍ 14
07 Consumer support ㆍ 14
Contents
01 General Information
Premium Smart Digital Doorlock
Handle
Battery cover
Open / Close
Button
Handle
Fingerprint
contact area
Password
RF Card
9V
Emergency
Start
Button
Main Key(OUT)
Main Key(IN)

4
5
03 How to use02 Precautions
Please read the precautions thoroughly
for your safety!
• The usage period of battery is at most
four months to eight months.
(Based on the use of ten times a day)
Exchange the battery at that time.
• Use 4 alkaline batteries of 1.5v AA.
(Rechargeable batteries unusable)
• In case of full discharge, it’s possible to open the
door with ngerprint, touch-key and password
with linking 9V alkaline battery to outdoor body
terminal.
• The digital product is assembled minutely and
complicatedly in the inside.
• The random dismantlement may be dangerous
besides making the troubles of the product.
• Consumer’s responsibility in case of random
dismantlement
• It’s prohibited to clean with water because
water cleaning may disturb an electronic circuit.
• It’s hoped that a dry towel is used for cleaning
the product.
The response measures
to electric discharge of battery
are as follows
You should not dismantle
randomly the product
Prohibition of water cleaning
DANGEROUS
CAUTIONS
WARNING
1. Password registration method
2. Card registration method
➊ Open the battery cover on the indoor unit of the door lock (the indoor unit) with the door
open, and press the registration button ① on the left bottom side.
➋Enter the numbers you want on the number panel of the front unit.
(3-12 digit numbers possible)
➌When you press”*” a notication sound (sounding”ppiririk”) will be heard and the entry
will be completed.
After password registration, make sure it works
1. When you register passwords for the first time or change them, the door may
be locked by mistake. Make sure to open the front door and carry an
emergency key, card, with you.
2. For the passwords, specify the 3-12 digit number except for “*” and “#”
3. If you enter new passwords, the existing ones will be deleted.
4. When all products are delivered, their passwords are set into
1, 2, 3, 4, 5, 6, 7, 8, 9, 0
5. When you install a product for first time, make sure the user enters the
passwords himself/herself.
For your safety, we recommend you to use all RF-card and Tag that manufacturer
provide with. Entecs confirms that “ISO 14443 Type A”certified RF-card and Tag
to be used with the Digital door locks. We, Entecs, are not responsible with the
cases that customers use other type RF-card and Tag, credit card, Smart card and
Mobile phone.
➊ Open the battery cover on the indoor unit of the door lock (the indoor unit) with the door
open, and press the registration button ② on the right bottom side.
➋On the screen, the numbers 1, 2, 3, 7, 8, 9 are lit.
(If transmission module isn’t connected, only 1, 3, 7, 8, 9 are lit)
➌Press “1” - the numbers are blink on the screen
➍ Hold the card near the reader (continuous registration possible), (Max. 50 cards)
➎Press the registration button ②on the indoor unit (the card registration nished).
After card registration, make sure it works.
CAUTION
WARNING

6
7
03 How to use
3. Deletion of all the cards registered
4. Fingerprint registration method
➊ Open the battery cover on the indoor unit of the door lock (the indoor part) with the door
open, and press the registration button ② on the right bottom side.
➋On the screen, the numbers 1,2,3,7,8,9 are lit.
(If transmission module isn’t connected, only 1,3,7,8,9 are lit)
➌Press ‘7’ — on the screen, ‘#’ is lit (the card deletion ready)
➍When you press and hold ’#’ for 3 seconds, all the cards will be deleted, with a
notification sound.
➊ Open the battery cover on the
indoor unit of the door lock
(the indoor part) with the door
open, and press the registration
button ② on the right bottom
side.
➋On the screen, the numbers
1,2,3,7,8,9 are lit.
(If transmission module isn’t
connected, only 1, 3, 7, 8, 9
are lit)
➌Press”3”-the fingerprint
registration ready
(number is lit and then the
numbers 1, 2, 3, 4 are lit)
➍As soon as the numbers blink,
touch your fingerprint to the
fingerprint reader
(a total of 4 times)
(continuous registration possible),
(Max. 100 fingerprints)
➎Press the registration number
②on the indoor unit
(the ngerprint registration
nished).
※ Press the card registration
button  Press “3”  Register
the same fingerprint 4 times
in a row as for the card
registration button, you are
advised to register the same
one at several angles.
※ Since the Fingerprint Identification Digital Door Lock is used as an authentication
means, it guarantees no risk of loss, theft, or hacking. Also this model uses a semiconductor method
sensor so it is safe due to no residual fingerprint left on the sensor unit.
※ When you register your fingerprint, you must register it four times. This thus reduces an identification
error to the maximum.
※ However, fingerprint registration may not be done, depending on the status of individual fingerprints.
5. Deletion of the whole ngerprint registered
6. Ways to set automatic locking / Manual locking
7. Automatic locking time setting change method
➊ Open the battery cover on the indoor unit of the door lock (the indoor part) with the door
open, and press the registration button ② on the right bottom side.
➋On the screen, the numbers 1, 2, 3, 7, 8, 9 are lit.
(If transmission module isn’t connected, only 1, 3, 7, 8, 9 are lit)
➌Press ‘9’ - on the screen ‘#’ is lit(the fingerprint deletion ready)
➍When you press and hold ‘#’ for 3 seconds, the whole fingerprint will be deleted,
with a notification sound.
How to set into automatic lock
Press the OPEN/CLOSE button for more than 5 seconds and press the number ‘1’ button.
Then, a Beep bee beep sound comes out and the system is set into Auto Lock.
How to set automatically closed time
Press and hold the Open/Close button for at least 5 seconds, a notification sound is heard,
press ‘8’ first, press the number you want to set among the number ‘1’~’8’
(‘5’ for 5 seconds), and press ‘*’.
How to set into manual lock
Press the OPEN/CLOSE button for more than 5 seconds and press the ‘1’ button.
Beep sound comes out and the system is set into manual lock.
•Beep bee beep sound-Auto Setting
•Beep sound - Manual setting
※ When products are delivered,
they are set into Auto Lock.

8
9
03 How to use
8. Way to lock the door manually
9. High-pitched / Low-pitched sound change
10. Forced locking function
11. Way to open the door
➊Press and hold Open/Close on the indoor unit for at least 5 seconds.
➋Whenever pressing ‘9’ on the outdoor part, the sound will change by level, from silence
to a high-pitched sound.
➌Until the pitch wanted is heard (a total of 8 levels), press ‘9’ and then ‘*’
Opening with the existing fake password
➊ It is possible to use the fake number function for the front digit.
Lastly, enter the password and ‘*’.
➋The number of digits must not be over 20.
Door close inside
Press OPEN/CLOSE button
Door open in house
Press “OPEN/CLOSE”
button or open the door with
the handle.
Door open with RF card
Place RF card on door lock
front and lock is opened with
melody
Door close outside
Close the door and place your
palm on numeric button
If there is a family member in
the house with external forced
lock setting, you can open the
door by pushing the handle
from the inside.
To open the door with the
external force lock setting, open
the door with a card or
password from the outside.
With releasing Auto-door close function,
door does not close automatically and follow up as above
External force lock setting
When the door is locked it’s going out ‘*’, ‘0’, ‘#’ lights on the plate for 3 seconds.
Dragging ‘*’, ‘0’, or ‘#’ in the direction within 3 seconds sets the double forced lock.
When an external forced, lock is set, the indoor unit handle locks and switches
to the security mode.
Opening door with password from outside.
Place hand on keypad or press Start button to lighten keypad. Press registered password and
press ‘*’ or ‘#’ to open door.
Manner Mode
Pressing Start button will activate manner mode, and door will open with no configuration
alarm. (Auto-setting to non-manner mode after door opening)
※ When password is consecutively wrong for 5 times, warning alarm is notified and
external button stops for 30 seconds.

10
11
03 How to use
12. Way to register wireless transmission /
Reception communication device module
for door lock(Optional)
13. Pattern register / Editing method
(In pattern mode setting)
➊Press right side button
➋Press ‘2’ button on
door lock
Bleep sound comes out~~
➌Press Setting button for 5 sec on
Remote controller and you will
hear long beep sound
※ Video door phone screen should
be on while registration
➍Press ‘*’ button on
Door lock to complete
registration and
you will hear same
long beep sound.
Bleep Bleep ~~
Setting button
1. Red +
2. Black -
3, 4 Door release wires
➊ Open battery cover in the inner main body and press ①Register button.
➋Drag a pattern on keypad using numbers 1~9. (4~12 digits)
➌Press ‘*’ and re-draw pattern(double check).
➍Press ‘*’ or ①Register button to complete registration.
Password / Pattern mode setting (Editing) method
Opening door with pattern
※ Leaving door open, press OPEN/CLOSE button for 3 seconds, Press number 2
on keypad then you can hear configuration alarm.
※ All numbers on keypad will lighten up in password using mode.
※ 0, # will not lighten up during pattern mode.
※ If pattern mode is configured, a new pattern must be newly registered.
※ Diagonal drag pattern is not available.
※ If password mode is configured, the password must be newly registered.
※ Pattern and password cannot be used simultaneously.
※ Touch keypad to lighten up numbers. Drag registered pattern to open door.
Remote
controller
14. Registration of remote controller
(Communication device) (Optional)
15. Way to delete all the remote controllers
(Communication devices) (Optional)
16. Battery replacement method
➊ Open the battery cover on the indoor unit of the door lock (the indoor part) with the door
open, and press the registration button ②on the right bottom side.
➋On the screen, the numbers 1, 2, 3, 7, 8, 9 are lit. ➌Press ‘2’.
➍Press the Open and Close buttons of the remote controller simultaneously
(continuous registration possible).
➎Press the registration button ②on the indoor unit
(the remote controller registration nished).
※ You can register up to 3 remote controllers.
➊ Open the battery cover on the indoor unit of the door lock(the indoor part) with the door
open, and press the registration button ②on the right bottom side.
➋On the screen, the numbers 1, 2, 3, 7, 8, 9 are lit.
➌Press ‘8’ on the screen, ‘#’ is lit(the remote controller deletion ready).
➍When you press and hold ‘#’ for 3 seconds, all the remote controllers will be deleted,
with a notication sound.
1. Battery life time : 4M to 8M upon 10times using a day
2. Battery change alarm : Blinking red lights with melody.
Open battery cover and replace all 4PCS of 1.5V AA at once. Make sure its polarity
3. Emergency power supply : After battery is fully discharged, place 9V battery
on emergency power contact and open the door with password or RF card
4PCS
of 1.5V AA
batteries
inserted
In case of Battery gone,
you can put 9V battery
on front cover
as emergency power
source
Emergency
power contact

12
13
H-7200 / H-7290
Item Specication of H-7200, H-7290
Rated Voltage 4ea 1.5V(LR6)AA alkaline batteries(6V)
Emergency
Power Source 1ea 9V battery(6LF22) (sold separately)
Operation
Method Electronic control (entering password or reading card key)
Weight 1.95kg(including the outdoor and indoor units)
Dimensions
Indoor unit 85mm(W) X 288mm(H) X 70mm(D)
Outdoor unit 89mm(W) X 286mm(H) X 65mm(D)
Item Usable
Frequency
Type
of
Radio
Wave
Type of
Radio
Wave
Type of
Radio
Wave
Power
Supply
RFID 13.56MHz A1D ASK Single DC 6V
(1.5V AA
X 4EA)
For Safety System 447.275MHz F1D FSK Single
Self-Regulato-
ry Safety
Conrmation
Certicate No.
B223H5004-17001
Type and
Symbol F-T-NK-M
Authorized
manufacture’s
name
Entecs Co., Ltd.
Model H-7200 / H-7290 Country on
Manufacture Made in KOREA
Vendor Entecs Co., Ltd.
Date of
Production
Year
Year : Month:
※ You are recommended to use this device(a Class B device registered for EMC
(Electromagnetic Compatibility)) chiefly at home.
※ Any of the details of the manual can be changed without notifying you in advance
for improvement of the product functions.
(a sticker will be used on the follow-up model for any change)
Number and card key, fingerprint key you can use
You can use your password, card key and fingerprint
conveniently and freely make settings and changes.
The open / Close functions of card and one-touch
All motions became convenient through simple one-touch.
The function of automatic re-Locking
The automatic locking in case of closing a door
Self-diagnostic function
The door lock diagnoses the troubles of the system by itself,
making you know the troubles of the function and
the time to exchange batteries through alarm
Automatic locking and time setting available
Free time setting available
The function of outward double-Locking device
In case of long-time outing, the motion of inside button is set
to stop so that the robbery through milk slot can be prevented.
Remote controller, home network registration
available(Optional)
Available opening doors with remote controller in door
No. of cards you can register
You can register up to 50 cards
Manner function
Through the control of button and melody occurring
from the product’s motion, it’s possible to prevent
the neighbors from the noise at midnight.
Function of fire sensor
In case of fire, a status of 65 ±5 makes the door opened
automatically. So, you can escape safety.
Imaginary number function
The function of making other’s passwords unknown
Button lighting device distinguishable
in darkness
When the device is worked, the lamp is lighted,
so it’s available to use even in darkness.
05 Product Features04 Product specication

14
15
Damage types
Compensation items
Within warranty
period
After warranty
period
State of
Normal
Use
In case the troubles occur
within 12 months after
installation
Repair for free
In case the same troubles
occur two times Repair for free Repair for Cost
In case the same troubles
occur three times
Product replace-
ment Repair for Cost
In case there is no any
parts for repair Product replace-
ment
Product r
eplacement
(Limited to at-
rate depreciation)
Intention
or
Fault of
Con-
sumer
In case of an ocial trip
because of consumer’s
mistake including the fault
exchanging batteries and
the immaturity of inputting
Repair for Cost Repair for Cost
To exchange consumption
goods including batteries Repair for Cost Repair for Cost
Failures or damages due
to other purposes than
the original purpose of the
product
Repair for Cost Repair for Cost
Failures or damages of
purpose Repair for Cost Repair for Cost
Failures or damages
because entering pass-
words has been omitted
or passwords have been
forgotten
Repair for Cost Repair for Cost
Product damaged because
of not carrying an emer-
gency manual key
Repair for Cost Repair for Cost
Failures or damages due to a
re or natural disasters Repair for Cost Repair for Cost
Malfunctions due to
condensation and moisture and
improper operations
due to poor installation
Repair for Cost Repair for Cost
• Then, in case of the carelessness of consumers and after the warranty period(one year),
you need to pay for the repair.
• In case you have no the warranty card, you need to pay for A/S, so you are required to
keep it.
• The cost for repair includes the cost of parts and the business trip expenses.
• This compensation standard for damage follows the compensation regulation for
consumer damage noticed by the Ministry of Finance and Economy.
Warranty Card(for Company)
Thank you very much for purchasing Entecs Co., Ltd.’s digital door lock.
The quality assurance period is counted from the date of purchase.
Therefore be sure to have the date specified for sufficient service.
• This product is produced by the thorough quality management.
• In case any troubles occur in the state of normal use
within the warranty period, you can receive A/S for free.
• You are required to fill up the address, name and telephone number
on the warranty card in time of buying the product
and to keep the card well, and if otherwise, you need to pay for repair.
Consumer Name
Telephone
Model Name
Serial Number
Term of Guarantee
Address
Installation
Agency
Telephone
Address
06 Warranty Service for Product Defects
07 Consumer support