MB QUART Polaris Sound Bar 8 User manual

The wiring and connections should be secure and away
from any moving parts or extremely hot surfaces.
Wiring
Power - Will turn the unit on or off. / Three second press will switch audio inputs.
PLAY / PAUSE - Press once to pause. Press again to play.
Volume DOWN - Each press will decrease the volume.
Volume UP - Each press will increase the volume.
Track DOWN - Press to restart the current track or to back up to previous tracks.
Track UP - Press to advance to the next track.
The Polaris Sound bar unit can be powered on either with the power button or with the
orange remote turn on wire.
During unit power up, the blue LED on the left of the control panel will blink indicating
that it is in Bluetooth search mode.
During this process “POLARIS” should show up in your list of Bluetooth devices when
the search has connected with your device. When the connection is made the blue
LED will change to solid.
Once a device has been paired the unit will reconnect at power up if the device is in
range.
To connect to a different device, the rst device will need to be disconnected.
When a phone call is received, the audio signal will mute but not disconnect.
To switch to 3.5mm press the power button for three sec.
To switch back to BT press the power button again for three sec.
Controls
Bluetooth Device Pairing
1
2
3
4
5
6
The pairing process can vary based on your particular device. Refer to the
operating instructions of your device. Below is the general process to connect.
Volume UP
Power
Track UP
1PLAY / PAUSE 2
6
Track DOWN 5
4
Volume DOWN
3
3.5mm AUX IN
AUDIO OUTPUT Polaris Harness
Connection Plug
Congratulations on your choice of Polaris Sound Bars by
MB Quart.This “Quick Start” Installation guide is meant to
help you complete a basic installation. For more detailed
information about the product, please visit our website at
MBQuart.com

Operators Guide
WARRANTY
Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics USA Inc. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper installation
and use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product being returned. The
costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics
USA Inc. This warranty is limited to defective parts and specically excludes any incidental or
consequential damages connected therewith. To view the full warranty, please visit the website.
MBQuart products are designed and engineered in the USA by
847-540-7700
www.maxxsonics.com Pol SBAR8 QSG 01 - rev1
Polaris
Sound Bars