5Spring clutch adjustment
Screw A
Screw B
loosen Screw A and Screw B and move the solenoid bracket height until t the latch is 90 to the
clutch spring cover.
Solenoid bracket
Clutch spring cover
Latch
90
When the machine start the feed paper. The Latch will be release the Clutch spring cover.
1 - 1.5mm
Screw C
Loosen Screw C and adjust the Solenoid up or down until the gap between the Latch and Clutch
Spring Cover is 1mm to 1.5mm.
5