Mcube BioCon-500 Manual

SERVICE TRAINING
Mcube Technology Co., Ltd.
www.mcubetech.co.kr

www.mcubetech.co.kr -2-
BioCon
BioConBioCon
BioCon-
--
-500 Service Training
500 Service Training500 Service Training
500 Service Training
1. General System
2. System Configuration
3. System Setup
4. Module Test
5. Troubleshooting
Contents

www.mcubetech.co.kr -3-
PRINCIPLES (1)
Gain
Lateral Position
ultrasonic reflections 3-dimensional
scanning abstract
bladder wall
125mL
calculate
bladder volume
∑
i=0
i=n-1
1. General
GeneralGeneral
General

www.mcubetech.co.kr -4-
PRINCIPLES (2)
▣
▣▣
▣Measuring ultrasonic reflections within a patient's body
- differentiates the urinary bladder from the surrounding tissues.
▣
▣▣
▣Measuring ultrasonic reflections on multiple planes
- 3-dimensional scanning
▣
▣▣
▣Calculates the patient’s bladder volume with multiple planes
- 3-dimensional images
- more accurate than conventional 2-dimensional ultrasound
▣
▣▣
▣Displays bladder volume and bladder image
- you can confirm that the result is reliable with 3D bladder images.
1. General
GeneralGeneral
General

www.mcubetech.co.kr -5-
2. System Configuration
2. System Configuration2. System Configuration
2. System Configuration
System block diagram
Connection diagram
Device disassembly

www.mcubetech.co.kr -6-
2. System Configuration
2. System Configuration2. System Configuration
2. System Configuration
System block diagram

www.mcubetech.co.kr -7-
2. System Configuration
2. System Configuration2. System Configuration
2. System Configuration
Connection diagram
Control Board
J4
Connection Board
JP3JP2JP1
JP5JP4JP6
JP3JP2JP1
Analog Board
JP5JP4
JP101
JP2
JP1
JP3
Charge
Board
J7
J5
J4
J2 J6
Key Board
Battery
Module
J2
J1 Ultrasonic
Probe
PC
USB
JP7
Battery
Board
J3J1
J1
JP6
JP7
Printer
Module
JP5 JP4
JP1
JP2
J2
LCD Module
DC
Adapter

www.mcubetech.co.kr -8-
2. System Configuration
2. System Configuration2. System Configuration
2. System Configuration
Components of the Device
Main Body
Main BodyMain Body
Main Body
Upper Case
Upper CaseUpper Case
Upper Case LCD Module / Printer Module /
LCD Module / Printer Module / LCD Module / Printer Module /
LCD Module / Printer Module /
Key Board
Key BoardKey Board
Key Board
Lower Case
Lower CaseLower Case
Lower Case
Control Board / Analog Board /
Control Board / Analog Board / Control Board / Analog Board /
Control Board / Analog Board /
Charge Board / Battery Board /
Charge Board / Battery Board / Charge Board / Battery Board /
Charge Board / Battery Board /
Connection Board
Connection BoardConnection Board
Connection Board
Battery Module
Battery ModuleBattery Module
Battery Module
Ultrasonic
Ultrasonic Ultrasonic
Ultrasonic
Probe Module
Probe ModuleProbe Module
Probe Module
Ultrasonic Probe
Ultrasonic ProbeUltrasonic Probe
Ultrasonic Probe
Probe Cable
Probe CableProbe Cable
Probe Cable
DC Adapter
DC AdapterDC Adapter
DC Adapter
*Ref.: Service Manual (3.Structure and Assembling of the Device )
*Ref.: Service Manual (3.Structure and Assembling of the Device )*Ref.: Service Manual (3.Structure and Assembling of the Device )
*Ref.: Service Manual (3.Structure and Assembling of the Device )

www.mcubetech.co.kr -9-
2. System Configuration
2. System Configuration2. System Configuration
2. System Configuration
Console

www.mcubetech.co.kr -10-
2. System Configuration
2. System Configuration2. System Configuration
2. System Configuration
Upper Case

www.mcubetech.co.kr -11-
2. System Configuration
2. System Configuration2. System Configuration
2. System Configuration
Lower Case

www.mcubetech.co.kr -12-
2. System Configuration
2. System Configuration2. System Configuration
2. System Configuration
Ultrasonic Probe Module(1)

www.mcubetech.co.kr -13-
2. System Configuration
2. System Configuration2. System Configuration
2. System Configuration
Ultrasonic Probe Module(2)
Red
RedRed
Red
3
33
3
white
whitewhite
white
5
55
5
Coaxial
CoaxialCoaxial
Coaxial-
--
-
7
77
7
Pink
PinkPink
Pink
9
99
9
Brown
BrownBrown
Brown
2
22
2
Blue
BlueBlue
Blue
4
44
4
Black
BlackBlack
Black
6
66
6
Coaxial+
Coaxial+Coaxial+
Coaxial+
8
88
8
Yellow
YellowYellow
Yellow
0
00
0
Green
GreenGreen
Green

www.mcubetech.co.kr -14-
3. System Setup
3. System Setup3. System Setup
3. System Setup
Firmware Upgrade
Set the Maintenance Menu
Set the Setup Menu
Calibration

www.mcubetech.co.kr -15-
3. System Setup
3. System Setup3. System Setup
3. System Setup
Firmware Upgrade
Step Activity
1Install “CS_Maintenance
CS_MaintenanceCS_Maintenance
CS_Maintenance”to a PC.
2Execute “CS_Maintenance
CS_MaintenanceCS_Maintenance
CS_Maintenance”.
3 Connect the device to the PC by using a USB cable.
4 Tu n on the device.
5Click “Setup
SetupSetup
Setup”in menu ba , and then click “Program Upgrade
Program UpgradeProgram Upgrade
Program Upgrade”.
6Click “Select File
Select FileSelect File
Select File…”button in the Dialog box.
7 Choose fi mwa e file to be upg aded.
8Click “Upgrade
UpgradeUpgrade
Upgrade”button in the Dialog box.
(Must not be disconnected du ing upg ade.)
9 Remove the USB cable and Change to use mode afte upg ade and
booting of the device is completed.
The scan data sto ed is deleted when the Fi mwa e is pe fo med

www.mcubetech.co.kr -16-
3. System Setup
3. System Setup3. System Setup
3. System Setup
Maintenance Menu
Item Available Value Reset Value
Cal. Value 5~20 10
Store Mode Current / Maximum Maximum
System Reset Return / Reset
(The scan data stored is deleted) Return
Probe Offset ~ 20 9
Print Density 3 ~ 10 7
Outline Mode On/Off On

www.mcubetech.co.kr -17-
3. System Setup
3. System Setup3. System Setup
3. System Setup
Setup Menu
Item Available Value Reset Value
Clinic Name - -
Set Date / Time - -
Print Option Value Only / Raw Image / Walls /
Value Only / Raw Image / Walls / Value Only / Raw Image / Walls /
Value Only / Raw Image / Walls /
All Planes
All PlanesAll Planes
All Planes Raw Image
Flash Store On/Off On
Setup Print - -
Scan Result Contour / B-Mode B-Mode
Auto Power Off, 3, 5, 7, 10 minutes 5 minutes
Calibration - -
Prescan Enable On/Off On

www.mcubetech.co.kr -18-
3. System Setup
3. System Setup3. System Setup
3. System Setup
Calibration
1. Check the error in the ultrasound transducer.
2. Verify the start position of the plane motor.
3. Verify the direction of rotation of the plane motor.
4. Check the plane motor rotation.
. Set the angle motor offset.
6. Check the angle motor rotation.
7. Set the reference threshold.

www.mcubetech.co.kr -19-
3. System Setup
3. System Setup3. System Setup
3. System Setup
Required material
• BioCon-500 Unit (Including Probe)
• Calibration Kit
• Saline Solution: About 2.5 liter

www.mcubetech.co.kr -20-
3. System Setup
3. System Setup3. System Setup
3. System Setup
When we should perform calibration?
Item
ItemItem
Item When
WhenWhen
When Remark
RemarkRemark
Remark
1When you upgraded BioCon-500’s program over
Version 3.10
Necessary
After replacing Analog Board Necessary
3 After replacing Digital Board Necessary
4 After replacing Probe Necessary
5 Periodical check (Once a year ) Recommended