MD SPORTS WM.COM 1614205 User manual

Troubleshooting Guide
TM
2016
This guide provides helpful hints and solutions for troubleshooting
of the product above.
Table of Contents
Model No.: WM.COM 1614205
/SMUS1614203
/SM.COM1614204
Product Name: Dome Hockey
No sound on Control Box and no numbers displayed on Scorers ---------- page 1,2
No sound on Control Box ------------------------------------------------------------------------- page 2
No numbers displayed on Scorer Displays----------------------------------------------- page 3,4
Incomplete numbers displayed on Scorer Displays ------------------------------- page 4,5,6
No counting on Scorer Displays --------------------------------------------------------------- page 7
Unworkable button on the Control Box -------------------------------------------------- page 8
Replacement Parts# ----------------------------------------------------------------------- page 9
1
2
3
4
5
6
7

page 1
No sound on Control Box and no numbers displayed on Scorers
1
Step 2: Please check the “Scorer Display Wire - Long & Short” to the Control Box and Scorer
Display if it is installed correctly.
Step 1: Please check the Adaptor Wire to the Control Box if it is installed correctly.
STARTSTART MINUTESSTART M
RESET ON/OFF PO
Control Box
Adaptor
If it is still not working: Please replace the Control Box and Scorer Display with
a new one.
HH
ON/OFF POWER OFF
RESET
Scorer Display Scorer Display
Scorer Display Wire - Short
Scorer Display Wire - Long
Control Box
START MINUTES SOUND POWER ON

page 2
Step 4: If the above 3 steps have failed then..
Replace the Control Box and Scorer Display with a new one.
No sound on Control Box
2
Step 1: Check that the "Sound on/off" button is turned on at the control box.
Re-press the "sound on/off" button.
Step 2: If this fails to resolve the problem.
Replace the Control Box with a new one.
Step 3: Please check the “power switch of Control Box” if it is turned on.
Turn on the power switch of Control Box.

page 3
No numbers displayed on Scorer Displays
3
Step 1: Check that both the scoring sensor wires - long and short are plugged into the
control box well.
Unplug, then re-connect them making sure you have a good connection.
Interchange the scorer display wires and plug into the control box and
you should have one of the following conditions:
a) If numbers are now displayed on one side but not the other replace the scoring sensor
wire with a new one.
b) If no numbers are still showing up replace the scorer display with a new one.
Step 2: If no numbers on only one scorer display:

page 4
Step 3: If no numbers displayed on both scorer displays:
Replace the scorer display wires and plug into the control box.
a) If numbers are now displayed on one side but not the other, replace the
scorer display wire with a new one.
b) If no numbers are still being displayed replace the scorer display with a new one.
c)If it is still not working replace the control box with a new one.
Incomplete numbers displayed on Scorer Displays
4
Step 1: Please check if the “Scorer Display Wire - Long & Short” are connected well into the
Control Box.
a. Pull out the scorer plug from the control box .
b. Check the scorer plug and control box jack for any signs of glue or other debris on
the parts. Clean off any debris and re-connect it as below picture.

page 5
Step 2: If it is still now working try the following steps:
a. Pull out the scorer display from the top rail.
b. Re-check the score plug and the scorer display jack for any signs of glue or other
debris on the parts. Clean off any debris and re-connect it as below pictures.
Step 3: If incomplete numbers on one scorer display only:
Take out both of the scorer displays and interchange to re-install.
a) If numbers are displayed: Replace the Scorer Display Wire with a new one.
b) If it still is not working: Replace the Scorer Display and Scorer Display Wire
with a new one.

Step 4: If in complete numbers on both of the Scorer displays.
Replace the Scorer Displays, Scorer Display Wire and Control Box with a new one.
page 6
Step 5: If incomplete numbers on the time only:
Replace the scorer display and scorer display wires with a new one.
Step 6: If incomplete numbers on all of the Scorer Displays with the same character .
Replace the Control Box with a new one.
Step 7: If incomplete numbers on both scorer displays as per below image:
Please re-check the Scorer Display Wire if they are plugged in the correct socket.

page 7
No counting on Scorer Displays
5
Step 1: Check that the "Start" button is turned on at the control box.
Re-press the button - “START” on the Control Box.
Step 2: Please check the “Puck Catcher Wire with Sensor -1 & 2” if both are connected
with the Control Box well.
Re-plug the Puck Catcher Wire with Sensor -1 & 2 on the Control Box and
connected well.
Step 3: One scorer failed to keep score.
Interchange the Puck Catcher Wire with Sensor -1 & 2, and then plug into the
Control Box, it will come out conditions as follow:
a) If scorer keep score: Replace the Puck Catcher Wire with Sensor with a new one.
b) If it is still not working replace the control box with a new one.
Step 4: Both scorers failed to keep score.
Replace the Control Box with a new one.
Puck Catcher Wire with Sensor

Apron corner reasembly
7Unworkable button on the Control Box
7
Step 1: Please check the “Electronic Scorer Operation Guides” on the Assembly Instruction
Refer to the Electronic Scorer Operation Guides and re-operate. If still, inoperable,
please replace the Control Box with a new one.
page 8
6

page 9
Replacement Parts#
7
If you use the websie to order parts, please do not call
our 800 number as well or CHARGES for duplicate
shipments will be accessed.
Please contact with us if you have any questions.
Thank you very much!
SCORER DISPLAY WIRE-SHORT ____________________________#P1
SCORER DISPLAY WIRE-LONG _____________________________#P2
CONTROL BOX _________________________________________ #P3
SCORER DISPLAY________________________________________#P4
PUCK CATCHER with SHORT WIRE _________________________#P12
PUCK CATCHER with LONG WIRE __________________________ #P13