MD SPORTS 1554829 User manual

MODEL: 1554829
ASSEMBLY INSTRUCTIONS
TM
Register Now on themdsports.com and Earn a One-Year Warranty for Free!
Meijer
Please contact us before returning the product to the store.

Give Us Your Opinion and Receive A
FREE FULL YEAR
EXTENTED WARRANTY!
Write a review for a recently
purchased item on
TheMDSports.com and receive an
extended full year limited warranty,
valued at $150.00.
See TheMDSports.com
for additional details.
TM

LIMITED 90 DAYS WARRANTY
NOTICE!
STAPLE YOUR RECEIPT HERE
This product is covered by a limited warranty that is effective for 90 days from the date of purchase. If, during
the limited warranty period, a part is found to be defective or breaks, we will offer replacement parts at no
cost to you, the customer. The only exceptions to the warranty include mainframes, table tops, playing
surfaces, batteries or tools.
The above warranty will not apply in cases of damages due to improper usage, alteration, misuse, abuse,
accidental damage or neglect.
This Limited Warranty gives you specific legal rights and you may also have other rights which vary from one
State (province) to another.
A PURCHASE RECEIPT (or other proof of purchase) will be required before any warranty service is initiated.
For all requests for warranty service, please feel free to contact our Consumer Service Department at :
Please be aware of your product’s Limited Warranty for the return/refund policy from the store, We, at Medal
Sports, can not handle the product which is out of product’s limited warranty since we only provide available
parts. Thank you!
PLEASE CONTACT US BEFORE RETURNING
THE PRODUCT TO THE STORE.
WEBSITE: www.themdsports.com
1 - Please leave your name, address, phone number, model number, parts needed on the answering
machine if there is no attendant. Failure to do so will result in a delay in shipping parts to you.
2 - Please review the replacement parts list and make sure that you have all of your parts before
beginning assembly. For questions that may arise or for missing/damaged parts, please contact us.
3 - Since you build all tables upside down, please inspect tabletops or playing surfaces right away before
putting together, all damaged table tops/playing surfaces need to be returned to the store. Please
contact with retailer for their return policy.
www.themdsports.com
1554829 1
(Continued on the next page.)

CAUTION !
ASSEMBLY TIPS
TOOLS REQUIRED
Phillips Screwdriver - Not Included
Standard (Flat Head Screwdriver) - Not Included
Allen Wrench - Included
Allen Key - Included
WARNING:
CHOKING HAZARD -- This item contains small parts or /
and small balls.Not suitable for children under 3 years.
WARNING: Adult Assembly Required.
IMPORTANT NOTICE!
Power Tools
-Set Low Torque
High Torque
over tightened
1 - Please read the instructions carefully, and follow all assembly, operation and safety
instructions properly in order to avoid damage and injury. For the assembly, at least two
adults are required.
2 - Some figures or drawings may not look exactly like your product. Please read and
understand the text before beginning each assembly step.
Do not use or keep product
outdoors. For indoor use only.
No wet/humid conditions.
Keep away from petsNo Children in
Assembly Area
Electric Screwdrivers may be helpful during assembly; however,
please set a low torque and use extreme caution.
1 - This product is intended for INDOOR use only.
2 - Please do not sit, climb or lean on the product.
3 - Please do not drag the product when moving it in order to avoid damaging the legs.
4 - Please only use spray furniture polish to clean the exterior surfaces of the product.
5 - This is not a child's toy, adult supervision is required for children playing this game.
X2
Strong Adults Needed
www.themdsports.com
1554829 2
(Continued on the next page.)

Hockey Mainframe Billiard Playfield
Side Leg Panel
Felt Pad Hover Puck
Table Tennis
Net
Side Pocket
Cap
Corner Pocket
Cap Leg Leveler
Table Tennis Ball
Table Tennis
Paddle
18 20
x1
x2
x1
21
x1
22
x2
23 24
17
x2
Side Leg Brace
x1
7 8
x2
9
x2
10 12
x4
x2
x2
13 14 15 16
x4
2 3 41
x1 x1 x2 x2
30 31
x1
x1
Allen key
Wrench
25 26 27 28
29
x1 x2
x2
x1
x2
x2 x4
Right Leg
Left Leg
Top Rail
Football Goal
x2
Pusher
Billiard Ball
Triangle Cue Brush Chalk
Lock Pin
x4
32
Table tennis
Post
19
x1
USB Power Cord
End Apron
11
x1
5
x2
Under Leg
Pedestal
6
x2
TT, Football,
Surface
Leg Panel
Triangle
Football-Red
www.themdsports.com
1554829 3
(Continued on the next page.)
1554829 PARTS LIST

3.5x16mm
Screw
P1 P2
x4 x4
P3 P4
x20
Square Nut
with Screws
Lock Seat
x2
6mm T - Nut
8mm T - Nut
Hockey Goal
36
x2
Corner Pocket
33
x4
Side Pocket
34
x2
35
x4
Plastic Strip
37
41 42 43 44
x14
3x18mm Screw
45 46
x2
x 8 x18
x20
x8
4x32mm
Screw
x20
3x12mm Screw
x20
47
39
x2
4x12mm Screw
49
x1
3.5 x 38mm
Screw 10 x 45mm Bolt
10mm Washer
x4
40
5 x 32mm
Bolt
48
x4
x20
38
5mm
Washer
3.5x25mm Screw
Bushing
Triangle
Football-Blue
www.themdsports.com
1554829 4
(Continued on the next page.)
1554829 PARTS LIST
1554829 PRE-INSTALLED PARTS

FIG.1
3. Repeat for both ends of the table.
4. Attach the Corner Pockets (#33) and Side Pockets (#34) to the Mainframe (#1) using two Screws
(#45) per Pocket. See FIG. 1.
ASSEMBLY INSTRUCTIONS:
1. Find a clean, level place to begin the assembly of your Multi Game. The table will be assembled upside down and
then turned over on its legs once the assembly is completed. This game table is heavy, and turning it over will require
at least two strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list page.
Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface.
FIG.1
34
33
1
X 1
45
X 12
43
X 8
47
X 2
40
X 4
P1
X 4
39
X 2
35
X 4
X 4
X 2
P4
X 2
34
33
45
45
1
P4
P1
39
35
43
47
40
NOTE: DO NOT insert Bolt (#47) all the way.
See FIG. 13B for details.
NOTE: DO NOT overtighten the Bolts and Screws.
www.themdsports.com
1554829 5
(Continued on the next page.)

FIG.3
41
X 12
14
X 4
13
X 2
NOTE: Insert the Table Tennis Post (#28) into the
Side Pocket Cap (#13) before locking the Screws
(#41), and remove the Table Tennis Post (#28)
before using the pool table.
2
21
41
41
14
13
13
28
28
FIG.3
6. Attach the Side Pocket Caps (#13) and the Corner Pocket Caps (#14) to the Billiard Playfield (#2) using two
Screws (#41) per Pocket Cap. See FIG. 3.
FIG.2
5. Attach the Billiard Playfield (#2) to the Mainframe (#1) using eighteen Screws (#44). See FIG. 2.
FIG.2
44
X 18
2
X 1
2
1
44
44
www.themdsports.com
1554829 6
(Continued on the next page.)

FIG.5
41 41
X 8
32
32
X 4
4
4
X 2
FIG.5
8. Attach the Lock Pins (#32) to the End Aprons (#4) using two Screws (#41) per Lock Pin. See FIG. 5.
FIG.4
7. Screw the Leg Levelers (#15) into the bottom of each Leg (#8 & #9). See FIG. 4.
FIG.6
5
X 2
46
X 6
9 8
&
15
P2
FIG.4
P2
X 4
9
X 2
15
X 4
8
X 2
IMPORTANT: Make sure that the Pin in the Lock
Pin is in the direction as shown.
Pin
Lock Pin
FIG.6
9. Attach the Leg Pedestals (#5) to the End Aprons (#4) using three Screws (#46) per Leg Pedestal. See FIG. 5.
5
46
www.themdsports.com
1554829 7
(Continued on the next page.)

FIG.7
46
X 8
FIG.8
45
X 8
6
X 2
45
6
8
9
4
46
FIG.7
10. Attach the Left Legs (#8) and Right Legs (#9) to the End Aprons (#4) using two Screws (#46) per Leg.
See FIG. 8.
FIG.8
11. Attach the Leg Panels (#6) to the Legs using four Screws (#45) per Leg Panel. See FIG. 10.
www.themdsports.com
1554829 8
(Continued on the next page.)

FIG.10
FIG.9
10
37
X 4
7
X 2
38
X 12
X 12
38
P3
X 8
37
38
37
X 8
X 20
P3 FIG. 8 Assembly
FIG. 9 Assembly
FIG.9
10
10
37
38
7
FIG.10
13. Attach the FIG. 8 Assemblies to the FIG. 9 Assemblies using four Bolts (#37) and four Washers (#38) per
Fig. 8 Assembly. See FIG. 10.
P3
www.themdsports.com
1554829 9
(Continued on the next page.)
12. Attach the Side Leg Braces (#10) to the Side Leg Panels (#7) using three Bolts (#37) and three Washers
(#38) per Side Leg Brace.See FIG. 9.

FIG.11
36
36
1
1
4
X 2
48
48
X 4
4
FIG.11A 32
4
4
32
39
40
40
47
FIG.11B
Top View of correct Swivel Bolt
and Washer Placement
FIG.11C 32
FIG.3 Assembly
FIG.11
14. Keep the Lock Pins (#32) open. See FIG. 11A.
15. Slide the FIG. 3 Assembly into the FIG. 10 Assembly, then tighten Bolts. See FIG. 11B.
16. Close the Lock Pins (#32) to prevent the Mainframe (#1) from flipping. See FIG. 11C.
17. Attach the Hockey Goals (#36) to the Mainframe (#1) using two Screws (#48) per Goal. See FIG. 11.
www.themdsports.com
1554829 10
(Continued on the next page.)

42
X 8
3
X 2 FIG.12
FIG.13
16
X 2
17
X 2
42
33
4
NOTE: Make sure that the Lock
Pins are closed to prevent the
mainframe from flipping.
17
17
16
32
NOTE: Open the Lock Pins.
FIG.12
18. Repeat for both ends.
19. Peel the felt off of the Felt Pads (#17) and attach onto the bottom of the Pushers (#16).
FIG.13
20. Ensure that the billiard side is facing upwards. If not, open all four Lock Pins, swivel the table, then close
the Lock Pins.
www.themdsports.com
1554829 11
(Continued on the next page.)

FIG.14
28
28
X 2
29
29
X 1
49
49
X 1
25
X 2
26
X 2
27 27
X 1
12
12
X 2
11
11
X 1
FIG.14
21. Insert the Net Posts (#28) and Net (#27) into the Mainframe (#1). See FIG. 14A.
22. In order to use the Table Tennis Surface, the Table must be on the Billiard Side.
23. Assemble the Football Set. See FIG. 14.
27
28
13
1
FIG.14A
www.themdsports.com
1554829 12
(Continued on the next page.)

19
X 1
X 1
18
FIG.15
18
19
Switch
Power In
MARCHE
ON OFF
ARRET
CHARGE
USB Power Plug
FIG.15
24. Insert the USB Power Cord (#19) into the USB Power plug.
25. Make sure that the switch on the rear of the Hover Puck (#23) is turned to the "OFF" position. Plug the USB
Power Cord (#19) into the back of the Hover Puck (#18). Allow the Hover Puck to charge for 60 minutes.
26. To operate the Hover Puck (#23), turn the switch on the rear of the Hover Puck to the "ON" position. The
Hover Puck will operate for 20-30 minutes when fully charged. See FIG. 15.
www.themdsports.com
1554829 13
(The last page)
YOU ARE NOW READY TO PLAY!
CHARGER IN
PRISE DE CHARGEUR
BC