MD SPORTS BG125Y19003 User manual

Assembly Instructions
MODEL
BG125Y19003
Targrt
www.medalsports.com 877-472-4296

English
This product is covered by a limited warranty that is effective for 90 days from the date of purchase. If, during the limited
warranty period, a part is found to be defective or breaks, we will offer replacement parts at no cost to you, the customer.
The only exceptions to the warranty include mainframes, table tops, playing surfaces, batteries or tools.
The above warranty will not apply in cases of damages due to improper usage, alteration, misuse, abuse, accidental
damage or neglect.
This Limited Warranty gives you specific legal rights and you may also have other rights vary from one State (province) to
another.
A PURCHASE RECEIPT (or other proof of purchase) will be required before any warranty service is initiated. For all
requests for warranty service, please feel free to contact our Consumer Service Department.
Please be aware of your product’s Limited Warranty for the return/refund policy from the store, We, at Medal Sports,
cannot handle the product which is out of product’s limited warranty since we only provide available parts. Thank you!
PLEASE CONTACT US BEFORE RETURNING THE PRODUCT TO THE STORE!
LIMITED 90 DAYS WARRANTY
MD SPORTS
877-472-4296
BG125Y19003 1(Continued on the next page.) www.medalsports.com
www.medalsports.com
Customer Service Toll Free
Please Contact
Mon.-Fri., 9:00 a.m. to 5:00 p.m. EST
For additional resources and Frequently Asked Questions, please visit us at
DO NOT RETURN TO STORE
WE ARE READY TO HELP

This product is intended for INDOOR use only.
Please do not sit, climb or lean on the product.
Please do not drag the product when moving it in order to avoid damaging the legs.
Please only use spray furniture polish to clean the exterior surfaces of the product.
This is not a child's toy, adult supervision is required for children playing this game.
1.
2.
3.
4.
5.
English
TOOLS REQUIRED
- Not Included
- Not Included
- Included
RECOMMENDED
IMPORTANT NOTICE!
Adult Assembly Required.
CHOKING HAZARD - This item contains small parts. Not suitable for children under 3 years.
WARNING
Phillips Screwdriver
Standard (Flat Head Screwdriver)
Allen Key
Electric Screwdrivers may be helpful during assembly; however, please set a low
torque and use extreme caution.
BG125Y19003 www.medalsports.com2(Continued on the next page.)
X2
At least 2 adults needed No children in assembly
area
Keep away from pets in
assembly area
Do not use or keep
product outdoors. For
indoor use only. No
wet/humid conditions.
Power Tools: Set to Low Torque
High Torque Over Tightened

Rim
11
x2
FOR FIG. 9
Rim Support Plate
12
x2
FOR FIG. 9
Backboard
15
x1
FOR FIG. 8
Rim Net
13
x2
FOR FIG. 10
Electronic Scorer
16
x1
FOR FIG. 8
Paddle Sensor
18
x2
FOR FIG. 10
Control Box
17
x1
FOR FIG. 15
Tube - 7
7
x2
FOR FIG. 1, 3
Tube - 8
8
x1
FOR FIG. 6
Tube - 9
9
x1
FOR FIG . 7
Tube - 10
10
x1
FOR FIG . 13
Tube - 4 - Right
4R
x1
FOR FIG. 4
Tube - 4 - Left
4L
x1
FOR FIG. 4
Tube - 5
5
x2
FOR FIG. 6
Tube - 6
6
x2
FOR FIG. 5
Self-Stick Strap
20
x2
FOR FIG. 15
Tube - 2
2
x2
FOR FIG. 2
Tube - 3 - Right
3R
x1
FOR FIG. 1
Tube - 3 - Left
3L
x1
FOR FIG. 1
Ball Return Net
14
x1
FOR FIG. 12
Wire clip
19
x6
FOR FIG. 17
BG125Y19003 www.medalsports.com3(Continued on the next page.)
English
PARTS IDENTIFIER
Tube - 1
1
x2
FOR FIG. 2
PART NUMBER FIG NUMBER
QUANTITY
PART
PART NAME

Push Button
P1
x8
FIG. 1, 4, 5, 6
Plastic Pole Insert
P2
x4
FOR FIG. 1, 2
Pole Holder
P3
x4
FOR FIG. 1, 6
HARDWARE
PRE-INSTALLED PARTS
End Cap
P4
x2
FOR FIG. 5
Air Pump
22
x1
Basketball
21
x4
M6x42mm Bolt
A1
x4
FOR FIG. 5
M6x37mm Bolt
A2
x12
FOR FIG. 1, 3, 4, 13
Spacer
A3
x4
FOR FIG. 5
M6x18mm Bolt
A5
x16
FOR FIG. 9, 10
M6 Nut
A7
x36
FOR FIG. 1, 3, 4, 5, 9, 10,
11, 13, 14
M6 Plastic Washer
A8
x12
M6 Washer
A6
x60
FOR FIG. 1, 3, 4, 5, 9, 10,
11, 13, 14
M6x57mm Bolt
A4
x4
FIG. 11, 14
Allen Key
x1
FOR FIG. 8
Wrench
A10
x1
M4x15mm Bolt
A9
x3
FIG. 10, 11, 14
A11
BG125Y19003 www.medalsports.com4(Continued on the next page.)
English
ACCESSORIES
Needle
22

x2
x2
x2 x6
x2
1
6
13
18 19 20
x2
14 15 16 17
2
7 8 9 10 11 12
5
3R 3L 4L4R
Find a clean, level place to begin the assembly of your product.
Verify that you have all listed parts as shown on the part list pages. If any parts are missing, call our customer service.
1.
2.
BEFORE ASSEMBLY
BG125Y19003 www.medalsports.com5(Continued on the next page.)
BEFORE ASSEMBLY
Please inspect and layout all the POLES and parts
English

FIG. 1
FIG. 2
x2
1
x2
P2
Pre-installed
x2
2
x1
3R
x2
P3
Pre-installed
x1
x4
x8
x4
x1
x1
7
A2
A6
A7
A10
A11
x2
P2
Pre-installed
x1
3L
3R
3L
3L
7
P2
P2
P2
P3
3R
A2
A6
7
A6
A7
1
1
2
2
A2 A6
3L
7
3R
A6
A7
P1
P1
BG125Y19003 www.medalsports.com6(Continued on the next page.)
ASSEMBLY
English
Safety lock
x2
P1
Pre-installed

FIG. 3
x4
A7
x1
x1
x8
7
A10
x1
A11
A6
x4
A2
FIG. 4
4R
A2
A6
A7
4L
A10
A11
x4
x1
x2
x2
x1
x1
x1
1
1
1
2
2
2
7
4R
4R
4L
A2
A6
A7
A2
A6
A7
Pre-installed
P1 x2
P1
ASSEMBLY
BG125Y19003 www.medalsports.com7(Continued on the next page.)
English

FIG. 5
Pre-installed
Pre-installed
x2
x2
x2
6
6
6
A1 A6 A3
A6
6
A1
A6
A3
A7
4L
6
6
A7
2
6
P1
P1
P4
P4
x8
x1
x4
x4
x1
A6
A10
A1
x4
A3
A7
A11
Note: Pull out tube - 6 (6) till push
button (P1) pop out and fixed.
BG125Y19003 www.medalsports.com8(Continued on the next page.)
ASSEMBLY
English

Pre-installed
5
8
P3
P3
P1
P1
x2
x1
x2
Pre-installed
P1 x2
9
FIG. 7
9x1
FIG. 6
5
5
8
BG125Y19003 www.medalsports.com9(Continued on the next page.)
ASSEMBLY
English

x1
x3
x1
15
A9
16
FIG. 9
x2
x8
x16
x2
11
A5
A6
12
x8
x1
x1
A7
A11
A10
FIG. 8
15
16
A9
11
A6
A5
15
A7
A6
12
Note: Ensure that washers are used
on both sides of the backboard as
shown in FIG. 9.
Note: DO NOT over tighten bolts.
BG125Y19003 www.medalsports.com10(Continued on the next page.)
ASSEMBLY
English

13
11
Note: Attach the part with larger
meshes to the rim.
x2
x8
x8
x2
FIG. 10
13
A7
A5
18
x8
x1
x8
x1
A8
A11
A6
A10
13 13 11 11 11 13
A5
18
A6
A7
A8
Note: Connect paddle sensor (18)
to the backboard.
BG125Y19003 www.medalsports.com11(Continued on the next page.)
ASSEMBLY
English

x2
x2
x2
x2
x1
x1
15
15
FIG. 11
1
A4
A8
A4
A6
A6
A7
A7
A8
A10
A11
Note: Please do not use any bolts on
the backboard at this step. The
bolts will be added later for the
ramp tab.
BG125Y19003 www.medalsports.com12(Continued on the next page.)
ASSEMBLY
English
Note: With the help of another adult,
attach the backboard (15) to the top
tubes - 1 (1).

x1
14
Connect Velcro
Strap here.
FIG. 12
14
14
9
9
14
1
Note: Slide in the elastic straps onto
tube - 1, then slide the sleeves of ball
return net (14) onto tubes at the top.
Note: To secure the ball return net (14)
to tube - 1 (1), attach the elastic straps
over the nuts as shown in FIG. 12.
BG125Y19003 www.medalsports.com13(Continued on the next page.)
ASSEMBLY
English

x1
x2
x4
x2
x1
x1
10
A2
A6
A7
A10
A11
FIG. 13
10
10
9
A7
9
14
A6
9
A2
Note: After the elastic straps are bound to tube 9 (9),
slide tube - 10 (10) into the sleeve of the ball return net,
then attach it to tube - 9 (9) as shown in FIG. 13. Fasten
the bolt (A2) with the allen key to finish this step.
BG125Y19003 www.medalsports.com14(Continued on the next page.)
ASSEMBLY
English

Ramp Tab
x2
x2
x2
x2
x1
x1
A4
A6
A7
A8
A10
A11
FIG. 14
Connect Velcro Strap here.
15
A4
A8
A6
A7
1
14
14
15
14
Note: At each bottom hole of the backboard,
attach the ramp tabs on ball return net (14)
using bolts (A4), washers (A6 & A8), and nuts
(A7) as shown in FIG. 14.
BG125Y19003 www.medalsports.com15(Continued on the next page.)
ASSEMBLY
English

Paddle
Sensor
Control
Box Paddle Sensor
Control Wire
Sensor wire
Control Wire
x1
x2
17
20
20
FIG. 16
14
FIG. 15
17
14
9
17
Electronic Scorer
Paddle
Sensor
Control
Box
Paddle
Sensor
16
18
Note: Insert the control wire and the sensor
wires into the electronic scorer (16).
BG125Y19003 www.medalsports.com16(Continued on the next page.)
ASSEMBLY
English
Note: Run the rest of the control wire
through the loops on the ball return
net (14). Place the control wire on the
tube - 9 (9) using the self-stick straps
(20) as shown in FIG. 15.

x6
19
Wire clip 15
19
Paddle
Sensor
Control
Box Paddle
Sensor
FIG. 17
Note: Fix the wires on both sides
onto the corresponding clips.
BG125Y19003 www.medalsports.com17(Continued on the next page.)
ASSEMBLY
English

WARNING
Do NOT trap your
fingers when folding the game.
STEP 1 STEP 2
STEP 4STEP 3
8
Note: Push tube - 8 (8)
downwards.
Note: Push tube - 9 (9) upwards to fold.
Note: Release the tubes by pressing
the push button (P1) as shown.
WARNING
Two Adults Required
9
P1
Note: Buckle the safety lock
by bending it upward.
BG125Y19003 www.medalsports.com18(Continued on the next page.)
HOW TO FOLD THE GAME FOR STORAGE
English