MDB Family 0413 Installation and operating instructions

Rocking Cradle (0413) - Assembly and Operation Manual
Congratulations on purchasing a MDB Family Product. This product will provide many years of service
if you adhere to the following guidelines for assembly, maintenance and operation. This product is for
residential use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for
assembling the product in addition to the Allen wrench included in the hardware box. Do not use power
screwdrivers. All of our products are made from natural woods. Please understand that natural woods
have color variations which are the result of nature and are not defects in workmanship.
READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF PRODUCT. KEEP INSTRUCTIONS
FOR FUTURE USE. DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF
PARTS AND HARDWARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED
DUE TO STYLISTIC VARIATIONS.
revised 25MAR2011 page 1

HARDWARE
PARTS
Tools Needed
(not included)
Phillips
screwdriver
page 2
W.

c
page 3
L
G
F
Q
L
H
E
Q
G
F

page 4
www.themdbfamily.com
MDB Family
J
S
S
P
U
V
U
VU
V
P
Stop using the cradle when a child is able to
sit, stand, kneel or roll over on his/her own.
The cradle could tip over if the child is
leaning against the rails of the cradle.
WARNING!