mectron OzoActive User manual

→ MECTRON OZOACTIVE
OzoActive produces ozone
and injects it directly into
PIEZOSURGERY® device
irrigation lines, providing
ozonated water which
reduces the risk of fungi,
bacteria and virus conta-
mination through aerosols.
OZOACTIVE
Connect foot-pedal via the jack terminal
OZOACTIVE
Connect the power cord
→ASSEMBLY PIEZOSURGERY® / OZOACTIVE
(*)

OZOACTIVE
Connect the thinner tube of the
Oral Surgery irrigation kit into the
designated coupler
PIEZOSURGERY®
Disconnect foot-pedal cable, pump
tubing components from infusion tube
and handpiece irrigation coupler
PIEZOSURGERY®
Connect foot-pedal via the
Ethernet plug port
PIEZOSURGERY®
Connect irrigation tube labeled
“HANDPIECE” to Handpiece irrigation
coupler
NOTE: Arrow indicates the direction of water ow (*)
→ MECTRON OZOACTIVE

PIEZOSURGERY®
Insert irrigation tube into peristaltic pump
PIEZOSURGERY®
Connect tube to infusion line
PIEZOSURGERY®
Prime the irrigation line by activating
a Pump/Flush cycle
 OZOACTIVE
Choose the Oral Surgery function
09:00 Home 03 Apr
Oral Surgery
Prophylaxis

 OZOACTIVE
Verify that the irrigation line has been
fully primed and press OK
 OZOACTIVE
Adjust the level of ozone according to
the irrigation level on the device
09:00 Home 03 Apr
Oral Surgery
Prophylaxis
Fill the hydraulic circuit
OK
09:00 Oral Surgery 03 Apr
03
Ozone
 PIEZOSURGERY® / OZOACTIVE
Press foot-pedal to start
 SETTINGS TABLE
Set the ozone level in accordance with
the irrigation level of the PIEZOSURGERY®
device. See indications table
IRRIGATION LEVEL OZONE LEVEL
 
 
 (default)  (default)
 
 
 
WARNING
• PIEZOSURGERY® and OzoActive default setting level is 3.
• In the Oral Surgery function, ensure that the irrigation kit is connected according to the
water ow indication arrow.
• Do not use the device without irrigation and without rst priming the irrigation line.
cod. 0073