Medic Therapeutics 004-249 User manual

LARGE ROOM AIR PURIFIER
WITH HEPA H13 FILTER
User Manual
Read this instruction manual carefully and keep for future reference. Always
refer to the actual product, as the images in this manual are for reference only.

IMPORTANT SAFETY INFORMATION
This product should only be used in accordance with the
specifications outlined in this manual. Usage other than
what has been specified here may result in serious injury.
While using electronic appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock and body injury including the following:
Before Use
• WARNING: To reduce the risk of fire or electric shock,
do not use this device with any solid-state speed
control device.
• Please connect the product power supply with the
adapter corresponding to the voltage.
• To avoid any electric shocks or fire hazards, please
clench the plug, do not pull the power cord.
• To avoid any damage of power cord, electric shocks or
fire disasters, do not pull, bend, warp, destroy of the
power cord intentionally.
• Do not use the device if the power cord/plug/socket
has been damaged, and contact the manufacturer
direct for repair or replacement information.
• To avoid any electric shocks or fire disasters caused
by damage of power cord, do not put the weights on
power cord.
• Do not touch the power plug with wet hands.
In Use
• Remove the plastic layer of the filter and do not use
the device without filters.
• Never drop or insert any object into any openings.
• Do not clog or block an air inlet or outlet.
• Do not use close to hot objects (like stoves, open
flame or gas heating source).
• Unplug immediately if any malfunction happens like
smoking, emitting an odor, etc.
• To ensure the natural flow by air and efficiency
of purification, always allow for plenty of space
surrounding the device.
Additional Precautions
• Do not use the device near fire and flammable
chemicals.
• To avoid any electric shock, fire or any other damages,
do not use the device near any propane, gas, natural
gas, or any other flammable sources.
• Do not use or apply bug spray near the device.
• To avoid any electric shock, fire disaster or any other
damages, do not use the device in any unstable
locations, in extreme temperatures, or damp areas
such as bathroom, etc.
Care & Maintenance
• Do not clean and reuse the composite filter and do
not clean the device with corrosive chemical cleanser.
• To avoid any damage or malfunction of sensors,
always clean the device with a soft cloth.
• To avoid any damage, electric shock or fire, do not
clean the device with ethyl alcohol or organic solvent.
• To avoid any electric shock or fire, always power off
and clean and then wipe off the plug when cleaning
the device.
Storage
• Always keep the device stored in dry places.
• Always keep the device away from flammable and
combustible areas.
• Store using the protective cover.
Tips
• Not suitable for use by disabled persons or those with
perceptual disturbances, dysgnosia users, or children.
• Do not lean on or rest against the device to avoid any
injury.
• Unplug when moving the device.
• If the supply cord or any machine parts are damaged,
contact the manufacturer directly for repair or
replacement information.
• Contact the manufacturer directly if any odor is
emitted from the filter.
• The cord, wires and/or cables supplied with this
product contain chemicals, including lead or lead
compounds, known to the state of California to cause
cancer and birth defects or other reproductive harm.
Wash hands after using. (California code of regulation
Proposition 65)
PRODUCT SPECIFICATIONS
CADR particulate 400m³/h
CCM particulate P4 (the highest level)
CCM formaldehyde F4 (the highest level)
Coverage area 25-50m²
Noise level 27-65dB
Color white/customized
Voltage 110V 50/60Hz
Power 40W
Product size 322*322*605mm
Carton packaged size 375*375*625mm
N.W/G.W 10kg/11kg

PRODUCT OVERVIEW
Included in Packaging:
PRODUCT FEATURES
• High-efficiency Purification of PM 2.5, Smoke, Pollen
and Other Particulate Pollutants.
• Removal of HCHO, C6H6, VOC, etc.
• 4 - Gear Wind Speed Design
• Timer Setting
• Filter Replacement Reminder
• Availability of Multiple Operation Modes, Auto and
Sleep Mode
• Laser Sensor Real-time Display of PM2.5 Value
4-in-1 Air Cleaning System:
Pre-filter → High Efficiency Particulate Air (HEPA) Filter
→ Modified Activated Carbon → Air Ionizer
Pre-filter
Blocks hair, fibers, big particulates, etc. and can be
washed regularly.
HEPA Filter
Efficiently filter out the particles as small as 0.01microns
(e.g. PM2.5, smoke, pollen,
acarid and other pollutants).
Modified Activated Carbon
High-quality modified activated carbon and catalyst
are utilized. They are modified with special proprietary
technology, and can efficiently purify methanol, benzene
series, VOC and other odorous pollutants.
Air Ionizer
Disperses negative ions to seek out and remove particles
& bacteria from the air, keeping you alert and active.
*Note: Pre-filter, High-efficiency activated carbon and
high-efficiency HEPA are incorporated in the same filter.
Air Purifier 1 Item
Composite filter 2 Pieces (assembled in the appliance)
Power line 1 Piece (in accessories box)
Instruction Manual 1 Copy (in accessories box)

PRODUCT SPECIFICATIONS
Precautions for Use:
• All filters have been installed in this air purifier.
• Check filters are installed properly.
• Check filter handle is towards you.
Installation of Filters
1. Place your fingers on the handle.
2. Move upward to remove the filter cover.
3. Take out the new filters with plastic film from the
appliance.
4. Remove all packaging films from the filters.
5. Re-install the filters.
6. Re-install the covers.

How to Turn On
Connect the power to enter the standby configuration,
the power indicator lights up.
Touch Button Control Panel Operations
The easy to use control panel you can select between 4
fan speeds, sleep mode, timer and optional ionizer.
Negative ion function is on by default (the
screen will display the icon). Touch this
button to toggle the ion On/Off.
Touch this button to set the timer to power
off from now on. Each touch will switch
among off, 1hr, 2hr, 4hr, 8hr.
When this button is pressed, the air purifier
will be set on Sleep Mode. The control
panel’s lights will turn off and the appliance
will operate at the minimum speed. This
ultra quiet-operation means undisturbed
sleep and waking up with clean fresh air.
Touch this button to switch from Auto
Mode to Manual Mode. In Manual Mode the
speed of the fan can be adjusted as needed
and can be set back to Auto Mode by
pushing the button again. (The screen will
display each kind of mode that is active).
In standby mode, the light will be off. Press
this button, the light will become bright
and the appliance is turned on changing
into auto mode; Press the button again,
the appliance will go into standby mode. To
completely shut down the appliance, the
power plug should be removed from the
socket.
Display Status
Note: PM 2.5 is defined as fine dust particles of a
diameter of 2.5 micrometers or less.
: Negative ion function : Manual mode adjustment
: Sleep mode : Timer 1—8 Hrs
: fan speed (1-4 speeds)
adjusts automatically according
to the air quality. : 1—2—3—4 fan speed level
: Filter replace reminder
Indicator (PM2.5)
Air Quality Color
Indicator Ring (PM2.5):
Green- 0-75
Orange- 76-150
Red- 150+

CLEANING & MAINTENANCE
Please unplug the machine if not being used.
1. Clean the body
2. Use a soft cloth to remove any stains.
3. Stubborn stains that cannot be easily removed can be
wiped with a moderate amount of neutral detergent,
using a soft cloth.
Note: Do not scratch the machine casing with hard
objects during maintenance. When removing the front
cover, please follow the instructions and do not damage
the machine parts.
4. Cleaning and replacement of the filter:
1) The filter replacement is reminded by the built-in
program. However, due to the different degree of
pollution in the actual application environment, the
use cycle of the filter will be different, and it can
be replaced in time according to the size and smell
of the sound generated by the machine.
2) When the surface of the composite filter is
dusty, use a vacuum cleaner to clean the surface
dust to extend the filter’s life expectancy. (It is
recommended to clean every 2 months)
Depending on the place of use and the method of
use (for example, households with a large number
of smokers), the cycle of filter replacement may be
shortened. If the effect is not good, please replace it in
time.
Dispose the filter as non-combustible refuse.
TROUBLESHOOTING
The above table lists the common problems with this
product. If you cannot find answer, please contact our
after-sales service centre.
Replace me Condion
Composite Filter
Replace approximately
aer every 10 to 12
months of use
In a household where
there is an absorpon of
4-6 cigarees per day
Problem Possible Causes Remedial Acon
Product works
abnormally
1. There is a problem
with the connecon.
2. The lter cover is not
placed properly
1. Please check whether
the plug is inserted
into the socket, and
“On/O” buon
status.
2. Re-install the lter.
Fresh air cannot be
delivered from air
outlet smoothly
1. The plasc package
of new lter is not
removed.
2. The air outlet of
purier is blocked by
foreign maer.
1. Remove the lter
plasc package.
2. Clear away the
foreign maer.
Poor odor removal
eect
1. The ambient air
quality of room is
very poor.
2. The high-eciency
acvated carbon lter
is in failure due to
environmental factor.
3. The room exceeds
the eecve area of
this product.
1. Open the window
to improve air ven-
laon.
2. Please replace the
high-eciency
acvated carbon lter
mesh.
3. Use in a smaller room.
The appliance
generates an abnormal
sound while running
1. The air inlet or air
outlet is blocked by a
foreign maer
2. Foreign maer falls
into the air tube
1. Please clear the
blocking object.
2. Clear the fallen
forei gn m ae r.
PM2.5 values do not
ever reduce and stay
only in the higher
values.
1. The sensor cover has
accumulated a lot of
dust.
2. The unit is being
operated in a dusty
environment.
1. Clean the sensor
cover.
2. Adjust the air purier
operang speed to
high speed.

WARRANTY
Limited Lifetime Warranty
Your Medic Therapeutics prodcut is backed by a limited
lifetime manufacturer’s warranty. Medic Therapeutics
will repair or replace your device at any time should it
fail due to a defect in material or workmanship, subject
to the certain limitations.
This limited warranty does not cover any damage that
results from unauthorized or improper use, service, or
repair. Further, it does not cover damage caused by
accident, impact, negligence, or normal wear and tear.
Should you discover your Medic Therapeutics product is
not functioning properly, please send your device to our
repair center for evaluation. If your product cannot be
repaired or serviced, we will reserve the right to change
it for a similar or newer model.
Please note that a flat rate of $35.00 will be charged
to cover a service evaluation fee and return shipping of
your device. All warranty claims must be accompanied
by a copy of your proof of purchase from an authorized
retailer. Please send your device, proof of purchase, and
a check or money order in the amount of $35.00 made
out to Medic Therapeutics to:
Address:
Medic Therapeutics Service Center
3069 Taft Street
Hollywood, FL 33021
Contact:
[email protected]om