Medic Therapeutics Mini Air Purifier User manual

MINI AIR PURIFIER
User Manual

SAFETY PRECAUTIONS
1. Do not use any liquid to clean this product.
2. There is a high-speed fan in the purifier. Do not put your hands or any foreign objects
into the Mini Air Purifier at any time.
3. Place the purifier out of reach of children.
4. Do not put any loose objects too close to the main unit.
5. In order to improve the purification effect, close the doors and windows when using
the product. Please ventilate when using the burner or stove to avoid carbon monoxide
poisoning.
6. Do not use power cords of different specifications. Please install the power cord
supplied with this product.
7. Do not use this purifier in the bathroom or any other places with high temperature
or humidity.
PRODUCT SPECIFICATIONS
Product Name: Mini Air Purifier Negative ions: 5millions/cm³
Product Size: 168x168x250mm Voltage: 5V 2A
Packing Size: 192x192x283mm Rated Power: 7W
Product Weight: 930G Noise: ≤55dB(A)
Filter: Pre+H13HEPA
Activated Carbon
CADR Particles: 50(m³/h)
Application Area: ≤20 m2UVC: Photocatalyst
sterilization
PRODUCT OVERVIEW
PREPARATION BEFORE USE
1. After removing all the packaging from the main unit and filter, rotate the filter
according to the direction of the logo and tighten the filter clip.
2. In order to better utilize the performance of the Mini Air Purifier, the main air inlet
should be within 6 inches of any obstructions.
3. Connect the TYPE-C charge. After pressing the “on” button, the Mini Air Purifier will
make a short “beep” and the ON/OFF button will light up.
Air outlet
Handle belt
TYPE-C
Charging port
Air pollution
sensor
Air inlet
PM2.5 Display Time settings
Control panel/Screen display
3 in 1
compound filter

Power on off
Adjustable: 1H-2H-3H-4H-5H-6H-7H-8H
Fan Speed: “Low---Mid---High---Auto”
Filter replacement reminder and reset
Sleeping Mode
L M H AUTO
CONTROL PANEL OVERVIEW
1. Control panel
INSTRUCTIONS
Before you turn on the Mini Air Purifier for the first time, be sure to remove the filter bag.
1. Filter Installation
Grasp the body of the Mini Air Purifier and turn it counterclockwise to open (the position
shown by the picture). Once open replace the filter and turn it in the direction of the lock
to close.
2. Air Quality Indicator
Air Quality Good Lightly Polluted Heavily Polluted
Fan Speed Low Mid High
PM2.5 0,50 51-149 <150
3. The Sleeping mode
When all other icons are off, and the purifier selects the low fan speed.
4. Filter Replacement Reminder
Change filter after 10-12 months of use.
2. Standby
Insert the plug of the Mini Air Purifier into the power source, you will hear a short ring
and the “power button” indicator will light up.
3. Power on/off
Tap the top power icon to switch the power on and off. The default fan speed is set to
Low mode.
4. PM2.5 Display
The air quality sensor automatically senses after power is on. Wait three minutes for the
sensor to stabilize. (Note: The value indicated in this function is for reference only and
cannot be used to replace professional testing equipment)
5. Fan Speed button
Tap the fan speed button to adjust the fan speed levels between: “Low” → “Mid” →
“High” → “AUTO”.
6. Adjustable Timer
Adjust the runtime of the device by tapping the timer button. The runtime alternates by
increments of one hour with every tap: 1H-2H-3H-4H-5H-6H-7H-8H, Loop in turn.
7. Replace the Filter
The Mini Air Purifier will count down when it is turned on or off. When the filter needs to
be replaced the filter icon indicator light will turn red. After replacing the new filter, keep
pressing the “filter” reset icon for 5 seconds.

CLEANING & MAINTENANCE
Be sure to unplug the power adapter before any maintenance!
1. Daily cleaning and maintenance time of filter reference: about once a month.
The surface of the filter should only be cleaned with a brush or a dry cotton cloth.
Do not wash the filter with water or detergent. The filter can easily break or be
deformed. Do not apply hard pressure when cleaning. If it is damaged, make sure to
replace before using.
2. Filter replacement: Ensure to replace the filter once every 8-12 months (depending on
extent of use and environment of the device). Please replace the filter in time when
the filtering effect is not functioning properly.
3. Outer surface cleaning: Wipe the outer surface and air inlet and outlet with a soft
cloth. Do not use a harsh chemical cleaner.
4. If the device will not be used for a long period of time: Unplug the power adapter,
clean the outer surface and the filter. Then, cover the device with a plastic bag and
store it in a dry area, away from moisture and direct exposure to sunlight.
TROUBLESHOOTING
LIMITED-LIFETIME WARRANTY:
Your Medic Therapeutics product is backed by a limited lifetime manufacturer’s warranty.
Medic Therapeutics will repair or replace your device at any time should it fail due to a
defect in material or workmanship, subject to the certain limitations.
This limited warranty does not cover any damage that results from unauthorized
or improper use, service, or repair.Further, it does not cover damage caused by
accident, impact, negligence, or normal wear and tear. Should you discover your Medic
Therapeutics product is not functioning properly, please send your device to our repair
center for evaluation. If your product cannot be repaired or serviced, we will reserve the
right to change it for a similar or newer model.
Please note that a flat rate of $66.00 will be charged to cover a service evaluation fee
and return shipping of your device. All warranty claims must be accompanied by a copy
of your proof of purchase from an authorized retailer. Please send your device, proof
of purchase, and a check or money order in the amount of $66.00 made out to Medic
Therapeutics to:
Address:
Medic Therapeutics Service Center
3069 Taft Street Hollywood, FL 33021
Contact:
[email protected]om
Issue: Possible Reasons and Solutions:
Odor • The filter is dirty and has not been replaced for a while.
•
Replace the filter.
• The filter is flooded or used in a wet environment.
•
Replace the filter.
• Re-use after a period of storage.
•
Clean or replace the filter.
• Burning smell
•
Immediately stop using, unplug the power supply and contact
repair.
No Air
Being
Released
• The motor is not running
•
Check if the power supply is normal, replace the power adaptor
or contact repair.
Too Loud • Air Purifier is too loud.
•
The fan speed level is too high. If this is the case, please change
the fan speed to a lower level or to sleep mode.
• Air Purifier gets too loud on auto mode.
•
When on auto mode, our Air Purifier uses sensors to detect
invisible changes in the air and adjusts the fan speed to restore
good air quality as quickly as possible.
•
To reduce the noise level of the device, you can adjust the fan
speed or switch on sleep mode.

EPA Est.NO.: 97483-CHN-1