MediCrystal THERMOGEM 3-GEMS BIO-MAGNETIC PHOTON MINI... User manual
QUICK START GUIDE
1 or 2 valuable toppers permeable
for IONS, FIR RAYS and pemf:
printed owner’s
guide
CARRY AND STORAGE
BAG for your mat
HIGH ABSORPTION BREATHABLE
WATERPROOF MULTILAYER
PROTECTION COVER TO KEEP
MAT CLEAN
and/or
3D AIR MESH PAD
TO CUSHION MAT AND
PROVIDE BODY SUPPORT
DISTRIBUTING STONES
PRESSURE
All products, controllers, specications and data as well as a set of items packaged in a box are subject to change without notice to improve reliability, function or design of the devices.
Please, check for the most updated products details at www.MediCrystal.com web site.
20
layers
EMF
FREE
HEATING
SYSTEM
11
Reveals crystals’ powers and
brings natural forces into your
home*
Provides a restful and calming
setting in the middle of
modern civilization*
Creates an energized
environment to feel inspired
and happy*
Great complement to massage,
yoga and reiki*
Helps to balance chakras’
activity and clean energy
channels*
10 Hz similar to Earth
magnetism PEMF program
cycling for 30 min every 2
hours to create relaxed and
harmonized environment
1Layer 1 – High quality heat resistant tan brown bicolor articial leather and eco-suede
which is elegant, durable, comfortable, and easy to clean, featured with ThermoGem™
Logo on the top.
2Layer 2 – Heat resistant Mesh fabric with elegant embroidery to x Amethyst, Jade and
Tourmaline by no glue artisan sewing process.
3Layer 3 – High Grade «A-AB» crushed to 2-10 mm and tumbled Natural, Not chemically
treated Purple Amethyst Crystals, Natural (non-ceramic) Black Tourmaline and Green
Jade Gems and Ceramic Tourmaline Hexagons. Hot crystals and gems release heating Far
InfraRed (FIR) rays and Negative Ions.*
Layer 4 –
Bio-stimulation Photon Red Light LEDs. Visible red light, at wavelength with 660 nm.
5Layer 5 – Cotton layer with charcoal lamination for thermal preservation and even heat
distribution.
6Layer 6 – Non-woven anion fabric layer for increased release of Negative Ions upon heat
distortion.
7Layer 7 – Waterproof and thermal preservation complex aluminum lm layer for protection
of inner mat sensors and heating systems from moisture and sweat.
8Layer 8 – Electronic-wave proof copper ber fabric EMI (Electro Magnetic Interceptor)
layer for primary shielding user from any remaining electromagnetic elds (EMF).
9Layer 9 – Aluminum foil EMI layer blocking EMFs and uniformly distributing the heat to
the upper layer with gemstones.
10 Layer 10 – Durable 0.2 mm non-woven glass ber fabric layer for heating wire xing and
protection.
11 Layer 11 – Unique silicon heating wires in teon insulation twice shielded with copper
and foil to completely eliminate EMFs.
Layer 12 – Thermostat sensors measuring temperature in the dierent points of multilayer
structure and reporting to the controller. This is the current mat’s temperature that you
can see on the controller display. The temperature sensors help to maintain uniform
heat level throughout the mat as set by user. They are also a part of overheat protection
controller system.
Layer 13 – Bimetal switches for emergency overheat protection with automatic power
shut-o feature if the mat heats up to 80 °C or 176 °F.
14 Layer 14 – Cotton fabric laminated with red clay accumulating heat, discharging Negative
Ions, naturally releasing Far InfraRed rays.
15 Layer 15 – Charcoal fabric layer releasing Far InfraRed (FIR) Rays and Negative Ions,
decomposing and deodorizing smell.
16 Layer 16 – Pure aluminum foil FIR reection layer blocks heat from being conducted
downwards and assists other layers to evenly distribute and continually release the heat.
Layer 17 – VLF PEMF (Very Low Frequency Pulsed Electromagnetic Fields) system coils.
18 Layer 18 – Non woven fabric layer for heat absorption and preservation.
19 Layer 19 – Compressed non-woven cotton padding for thermal protection and increased
comfort.
20 Layer 20 – Waterproof polyester peach skin fabric for durability, tension resistance, and
protection from moisture, dirt and wear.
E-20PV
operational
CONTROLLER
with wires
THERMOGEM™ 3-GEMS BIO-MAGNETIC PHOTON MINI MAT
THERMOGEM™ MINI MAT SET INCLUDES:
mini
mat
size: 32"x20" (80x50 cm)
heating area: 26"x15" (64x36 cm)
FIR HEAT ADJUSTABLE FROM 86 °F TO 158 °F
2BIMETAL SENSORs
2thermostat SENSORs
12 bio-Stimulation Red Light LEDs
3PEMF COILS
2lbs of crushed Amethyst Crystals
0.8 lb of crushed tourmaline Crystals
0.8 lb of crushed green jade stones
38 pcs ceramic tourmaline hexagons
HEATING POWER: 130w, voltage 110v, 60hz
Total weight: 10 lbs / gross weight: 12.5 lbs
Mat electrical connector for controller plug.
Tight connection between the mat and
controller is essential to avoid errors and faults
1
23
5
6
7
8
9
10
20
14
15
16
18
19 Tumbled Natural Amethyst, Tourmaline, Jade crystals,
and 1/4 inch thick ceramic Tourmaline hexagons are
xed without glue by special heat resistant mesh fabric
32"
20"
26"
15"
heating area
Natural Amethyst
Natural Black
Tourmaline
11
Monochromic
660 nm Red
Light LEDs
Green Jade
Ceramic
Tourmaline
QUICK START GUIDE
All products, controllers, specications and data as well as a set of items packaged in a box are subject to change without notice to improve reliability, function or design of the devices.
Please, check for the most updated products details at www.MediCrystal.com web site.
*ThermoGem™ stone mattresses, mats, pads, belts, wraps, pillows can
help you create a relaxing, soothing and re-energizing environment to
maintain your wellness, balance, good sleeping, physical strength and
tness and awaken the restfulness, comfort and invigoration powers and
energies. Together with exercises and healthy diet ThermoGem™ products
may supplement your daily activity and become an important part of your
healthy lifestyle which can improve your ability to do the everyday things
and enhance life experience. ThermoGem™ products are not intended to
diagnose, cure, treat, mitigate, or prevent any disease, illness or medical
condition or to substitute medical treatment of any kind or to aect the
structure or any function of the body. Information here is never to be
construed a medical advice. It does not reect or represent a product
claim. FDA has not approved or evaluated ThermoGem™ products or this
information. All products, specications, and data are subject to change
without notice to improve reliability, function or design of the products.
LEGAL DISCLAIMER
1. Consult your health professional to make sure that you can use red light, hot stones,
FIR sauna, and PEMF (pulsed electromagnetic elds). Take extra care if you have any
health issues.
2. Read the USER GUIDE, safety instructions, «use with caution» and contraindication
sections to be sure that the mat is OK for you, especially if you are going to use it on high
heat settings or sleep on it.
3. Drink a lot of water, juices, herbal teas before, during, and aer sessions, and replenish
minerals such as calcium, potassium, sodium, magnesium and others which may be lost
with perspiration or urine.
4. Create a relaxing surrounding atmosphere.
5. Put the mat on your bed or on the oor with crystals facing up.
6. Connect the controller to the mat very tightly, then to the power socket.
7. Turn the controller ON and set the timer, only then set the max temperature to test the
mat for an hour. While it is cooling down, test PEMF functions for 15-20 minutes. Do
not put the protector on the mat or lay on it during this time.
8. Cover the mat ENTIRELY with a blanket to pre-heat the stones for 30-60 minutes to
set level. If the mat is covered only PARTIALLY, it may cause dierent temperatures in
dierent parts of the mat, sensors disruption and controller malfunction.
9. Do not move a lot on the mat, do not stand on it, do not bend it and do not put your
head on hot stones. While heating NEVER put on the mat foam, rubber, yoga, camp
pads, mats, other non-permeable covers or too thick (more than one inch) plies of towels
or heavy blankets. NEVER put any solid objects such as pillows, laptops, books, bags,
controllers, etc. on the heating surface to avoid overheat, malfunction and re risks.
10. If mat is too hard for you, put some of the included pads or covers on the mat to cushion
it and eliminate the crystals’ pressure. You may add more towels if necessary. For more
Red Light try the mat with 3-D Pad only or a bare mat for 15-30 minutes.
11. Start with the mat on the lowest heat settings, 35-40 °C or 96–112 °F, and short
sessions only for 15-20 minutes (do not forget to preheat the mat, it will be slightly
warm) and watch how your body reacts.
12. If you enjoy shorter sessions and your body reacts well, move up to longer or more
intensive and frequent sessions.
13. Gradually increase the temperature by several degrees and session time by 5 minutes
each other day, and only if you feel comfortable and want more intensive experience.
14. You should choose the length, intensity and frequency of the sessions so that you feel
comfortable and refreshed.
15. You should also have some rest between the sessions and never start with more than
three a week before you are better informed as to how they inuence you.
16. You can also try the PEMF function, on the lowest heating levels, for 20-30 minutes
to check how your body reacts. Later if necessary you will be able to use all the functions
or any of their combinations together. However, we recommend not to use PEMF on high
heat to avoid overstimulating.
17. You should not feel any discomfort – but if there is any, rest several days, and restart
with the temperature, length and frequency set to the lowest possible.
18. Unplug your controller from the wall socket always when not in use. But do not
disconnect controller from the mat more frequently than necessary, in order to avoid
the connection becoming loose.
CONTROLLER E-20PV for mats with PEMF and PHOTON
1
3
5
2
4
6
89
7
10
11
1Power ON/OFF Switch Button – Before turning ON Сontroller, please, rotate the dial into the minimum position then push the
switch to turn mat ON. Controller Temperature display will show current temperature. To turn OFF turn the dial again into
minimum position rst and aer this press the switch again.
2Timer/Temperature Display – In Temperature Mode shows the current temperature in Celsius (30-70 °C), ashes to the set
temperature, then back again. When the Timer Control Button is activated LED Display shows the number of hours the mat
is set to function.
3Adjust Temperature Dial – Use to increase or decrease heat 30~70 °C (86~158 °F).
4Operation Indicator – Small Red point to the right of Temperature Display – ON when mat is heating, OFF when set temperature
is reached.
5PEMF Toggle Button – Activates magnetic pulsation for 30 minute periods each 2 hours of mat active sessions.
6PEMF Red or Orange Light Indicator – ON when Magnetic Pulsation is activated, OFF when it stops.
7PHOTON Toggle Button – Activates Red LEDs for 30 minute periods every 2 hours. If controller does not have Timer button it is
equipped with built-in auto shut-o aer 8 hours function.
8PHOTON Green Light Indicator – ON when Red LEDs are activated, OFF when they go o.
The temperatures on the display reect the condition of the inner heating elements, not the surface of the mat, which can be
10-20 °F lower (or even lower than this) if the mat is not covered with a thick blanket.
Usually, if the ambient temperature is around 70 °F, it takes between a half an hour to hour for the mat to reach the maximum
level (158 °F, or 70 °C) if covered it with a thick blanket.
If controller shows errors, the easiest way to solve the problem is to reset it.
Disconnect the plug from the socket rst and then from the mat connection terminal. When you disconnect the plug from the
mat, please always do it carefully with two hands, holding the connector with one hand while the other hand pulls the plug. Pull
the plug out of the connector on the mat carefully as well. Do not pull it by the cable or the connection between the mat terminal
and the controller plug may become loose.
Aer this always rst reconnect the controller to the mat tightly and then plug it into an electrical outlet again. Be sure that the
socket has electrical power, this can be tested by using any other electrical device.
If your mat is rated for the North American 110-120V voltage and your controller is with the U.S. standard
NEMA 5-15P (two-pole with ground pin) plug, use it only with the step-down 220-250V to 110V voltage
converter in the 220-250V 50Hz countries. The maximum wattage of such converter should be at least
2-3 times higher than the mat’s power consumption. Do not connect the 110-120V mat into the 220-250V
outlet through an adapter. If you plug in a device that isn’t rated for the outlet’s voltage, it may be severely
damaged, and cause re risks!
THERMOGEM™ 3-GEMS BIO-MAGNETIC PHOTON MINI MAT
