Medify Air MA-112 User manual

MA-112
AIRPURIFIER
MA-112
READ AND SAVE THESE INSTRUCTIONS
INSTRUCTION MANUAL AND WARRANTY INFORMATION
Lifetime warranty if replacing filters on time

IMPORTANT SAFETY INSTRUCTIONS:
IN ORDER TO AVOID ANY DAMAGE TO YOU, OTHERS OR PROPERTY, FOLLOW THE FOLLOWING SAFETY PRECAUTIONS:
IF THE POWER CORD OR UNIT DOES NOT WORK, CONTACT MEDIFY CUSTOMER SERVICE IMMEDIATELY.
READ ALL INSTRUCTIONS BEFORE USING.
WARNING – TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS:
• DO NOT touch the power plug with wet hands.
• Turn off the power before cleaning the unit.
• DO NOT use the air purifier in rooms where fumigation or pesticide is being used.
• Keep the unit dry.
• DO NOT use air purifier in a room where it is being cooked with oils and grease that may clog the filters.
• Use ONLY a soft clean cloth. DO NOT use solvents like Benzene, Alcohol or any flammable cleaners to
clean the air purifier.
• This is a 220-240V unit. It is NOT made for 11OV use. Plugging it into a 11OV outlet will damage the
motor and circuits and the unit will no work any longer. Use only with a 220-240V outlet.
• Turn off the power immediately in case of any of the following:
-Malfunction of any switch
-Circuit failure
-Abnormal heating of wires or plugs
-Any other malfunction
CORRECT DISPOSAL OF THIS PRODUCT
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in
order to avoid any type of hazard. This appliance can be used by children aged from 8 years and above and people with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision
or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and maintenance of the unit shall not be made by children without supervision. Prior to
cleaning or doing any type of maintenance, the appliance must be disconnected from the supply.
SAVE THESE IMPORTANT INSTRUCTIONS FOR EASY REFERENCE.
This symbol indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.

3
UNIQUE FEATURES & SPECIFICATIONS
FOUR-STEP FILTER PURIFICATION SYSTEM
1. FIRST STEP: PRE FILTER
Removes large particles such as: Dust, Dander, Hair and others
2. SECOND STEP: TRUE HEPA H13 FILTER
HEPA H13 is a higher grade of TRUE HEPA that can remove 99.9% of particles down to 0.1 microns as
well as PM2.5 particles such as smoke, pollen, dust mites and others.
3. THIRD STEP: ACTIVATED CARBON FILTER
Absorbs odors, harmful VOCs, and other toxic substances such as formaldehyde.
4. FOURTH STEP: IONIZER GENERATOR
Produces negative ions to neutralize positively charged particles such as dust, bacteria, mold spores,
pollen, animal dander and other airborne positive particles.
•
•
CLEAN AIR INLET
POLLUTED AIR INLET POLLUTED AIR INLET

4
TECHNICAL DATA
• Voltage: 220-240V AC SOHz
• Rated power: 120W
• Noise level: < 69 dB(A)
• Unit dimensions: 28.311 H x 15.711W x 15.411 D
• Unit weight: 32.8 lbs.
CONTROL PANEL
INDICATOR LIGHT OF AIR QUALITY
FRONT PANEL
LEFT COVER RIGHT COVER
PRE-FILTER PRE-FILTER
TRUE HEPA H13 FILTER
+ ACTIVATD CARBON FILTER NET
TRUE HEPA H13 FILTER
+ ACTIVATD CARBON FILTER NET
HANDLE
AIR OUTLET COVER
SENSOR COVER
BACK COVER
AIR INLET

5
BEFORE USE
LEARNING ABOUT AIR QUALITY INDICATOR LIGHT
DISASSEMBLY AND INSTALLATION METHODS OF SIDE COVERS
The air quality indicator reflects the current air quality
condition.
1. Press down on the handles on the sides to remove the
side covers. After they open, lift the cover out from the
bottom fixed grooves.
2. To reinstall the side covers, align the fixed slots
and insert the covers into the slots. The covers will
automatically snap back into place.
50cm
50cm
50cm
50cm
50cm
50cm
Air Quality Indicator Light Index
INDICATOR LIGHT OF AIR QUALITY
Blue / Excellent
Green / Average
Red / Poor

6
INSTALLING THE AIR PURIFIER
Do not obstruct the air intake or the clean air outlet.
To ensure enough ventilation, make sure there is a 20 inch
(or 50 cm) distance between the air inlet and the wall or
nearby furniture.
1. Place the machine in a dry location and on a smooth
and flat surface.
2. Press down on the handles on the sides to remove
the side covers. Once they are open, lift the cover out
from the bottom fixed grooves.
INSTALLING THE FILTER SET
All filters must be used together. Please remove the filters according to the following instructions.
Reinstall the filters accordingly.
50cm
50cm
50cm

7
3. Do not disassemble the filters. Filters sets come in one
piece for maximum efficiency.
4. Remove any exterior packaging of the filter sets. Place
the filters back in the air purifiers once the packaging
has been removed.
5. To reinstall the side covers, align the fixed slots
and insert the covers into the slots. The covers will
automatically snap back into place.

8
HOW TO USE
BEFORE USE
• After plugging it in, the air purifier will beep. Indicator lights will flash 1 time. Then, they will turn off.
POWER BUTTON
• Press the ON/OFF button. The unit will start on speed 1 and the indicator light will be on.
• Press the ON/OFF button again to turn off the unit.
FAN SPEED SETTINGS
• Press the SPEED button to choose your prefered air speed: 1, 2, 3 or 4. In AUTO mode, the unit will choose
the fan speed based on the air quality.
SLEEP MODE
• Press the sleep button to enter into sleep mode, then all other indicator lights will turn off. The fan speed
and noise level will change to the lowest setting.
• After 10 seconds, the sleep indicator light goes out as well.
• Press any key to exit sleep mode.
TIMER
Press the timer button and choose your preferred hour options: 1, 2, 4, 8 or no timer.
CONTROL PANEL
FILTER REPLACEMENT
INDICATOR
CHILD LOCK
INDICATOR
1H, 2H, 4H, 8H
TIMER INDICATOR SLEEP INDICATOR
CHILD-LOCK TIMER BUTTON IONIZER BUTTON SPEED BUTTON
ON/OFF BUTTON
LOW
HIGH
MEDIUM IONIZER
INDICATOR
1. Ionizer button/ Filter
Replacement Reset
2. SLEEP Button
3. TIMER Button (1, 2, 4, 8 hours)
4. AUTO Speed Button/ Child-lock
5. Fan Speed Button (1, 2, 3, 4)
6. ON/OFF Button
7. Air Quality Indicator Light
8. . Digital Display of PM2.5

9
IONIZER MODE
Press the Ionizer button . The unit will beep and the indicator light of the Ionizer will be on. Press the Ionizer
button again and the unit will leave the Ionizer mode. The indicator light for the Ionizer will be off. When
the filter replacement indicator is on, the user needs to replace the filter and press the Ionizer button for 3
seconds to reset it. Then, the fan speed indicator light will stop flashing.
CHILD-LOCK BUTTON
In this mode, none of the function keys can be used or changed (except the child lock function). To turn on
the child lock, hold the button down for 3 to 5 seconds. To turn off the child lock function, hold the button
down for 30 to 45 seconds.
CLEANING AND MAINTENANCE
Please make sure to pull out the power plug before cleaning the unit. Do not put the unit in water or in any
other liquid. Do not use abrasive, corrosive or flammable products to clean any parts of the unit. The unit
uses composite filters, so filters cannot be washed.
CLEANING THE AIR PURIFIER
Clean the air purifier regularly to prevent dust accumulation. Use a soft and dry cloth to remove dust from
the air purifier.
CLEANING THE AIR QUALITY SENSOR
Clean the air quality sensor every two months to ensure the best performance.
Clean it often if the machine works in a dusty environment.
1. Use a soft brush or cloth, to clean the intake and outlet
of the air quality sensor.

10
2. Disassemble the cover of the air quality sensor.
3. Use a dry swab to clean the air quality sensor, air
intake and air outlet. Use a hair dryer to blow out the
sensor area or use a vacuum cleaner. Either works well
to clean the sensor.
4. Reinstall the cover of air quality sensor.
The air quality sensor may accumulate condensation. If this happens, the air quality sensor,
even if in a ventilated room, may show poor air quality. Please make sure the air quality
sensor is clean and dry to perform properly.
ATTENTION

11
FILTER REPLACEMENT
LIGHT INDICATOR TO REPLACE THE FILTER
The indicator light will remind users when it is time to change your filter.
1. Remove all existing filters from the unit. Remove all
packaging from new filter sets. Then, install the new
filters into the unit in the same order as existing filters.
Turn off and pull out power plug before replacing the filters. If replacement filter indicator light
flashes again after replacement, press the reset button at the side (as shown) until indicator
light resets itself.
ATTENTION
2. Install new filter sets in the unit. Reinstall side covers,
as outlined earlier. Side covers will snap back in
automatically.
3. When filter replacement is complete, plug in unit and
turn on. Press the Ionizer button for 3 seconds to reset
the unit.

WARRANTY INFORMATION
If you have any additional questions, please contact customer service. All names and trademarks are property
of Medify Air. Our company reserves the right to change the product at any time, without prior notice, and the
company has no obligation to adjust any products supplied earlier. Please refer to the detailed warranty terms
below. To register for the lifetime warranty, please fill out the attached form and mail it to:
Medify Air
1325 SW 30th, Avenue
Deerfield Beach, FL 33442
Or complete the lifetime warranty registration available on our website (preferred method):
www.medifyair.com
LIFETIME WARRANTY
Medify guarantees your Medify Air Purifier to be free of defects in material or workmanship for a lifetime
period, provided you have completed and returned your warranty registration to Medify Air within the first 30
days of purchase, and that the filters are replaced with original and genuine Medify Air replacement filters at
least once every six (6) months of after 3,000 hours of use. The filter replacement indicator will let you know
when it is time to replace it. Medify Air will replace the defective unit at no charge to you and reimburse you
for any shipping charges. After 30 days, Medify Air’s obligation and”liability under this Lifetime Warranty is
dependent on your use of our genuine filters, purchased on our website or from our authorized resellers, which
can be found on our website.
Our Lifetime Warranty remains in effect as long as:
1. You submit your warranty registration to Medify Air within 30 days of purchase.
2. You change the filters with genuine and original Medify Air replacement filters at least once every six (6)
months or after 3,000 hours of use (whichever comes first).
3. You use a proper power supply based on voltage: 120 V.
4. There is no evidence of tampering, mishandling, neglect, accidental damage, modification, and/or repair
done to the Medify Air Purifier by anyone other than authorized Medify Air service personnel.
5. Your air purifier is operated in accordance with the provided instructions.
This Lifetime Warranty is provided by:
Medify Air
1325 SW 30th, Avenue
Deerfield Beach, FL 33442
www.medifyair.com
[e-mail]
888-258-1008