Medify Air MA-40 User manual

Read this manual before using.
Operate the unit according to the instructions provided.
Keep this for future reference.
V2.0

TABLE OF CONTENTS
Control Panel Functions
Adjustment of Fan Speeds
New Filter
Open and Replace
Belore Use
Turning Off Air Purifier
15
16
7
9
10
10
10
11
11
11
11
12
12
13
4

In order to avoid damage to you, others or property,
follow the safety precautions.
If the power cord or unit is out of order,
contact Medify Customer Service immediately.
This is a 110v unit. It is NOT made
for 220v use. Plugging into a 220v
outlet will burn out the motor and
circuits and the unit will no longer
work. Only use with a 110v outlet
Turn off power immediately in case of any
of the following:
Abnormal heating of wires or plugs
Any burnt smell, abnormal sound or shock
Any other malfunction
Keep machine dry.
Do not use air purifier in rooms with
fumigation or pesticide use.
Do not use air purifier in a room that
is cooking with oils and grease that
may clog the filters Do not use solvents like Benzene,
Alcohol or any flammable cleaners
to clean the air purifie
Only a soft clean cloth is to be used.
Clean air
outlet
Pre filter,HEPA H13 medical grade filter and Activated carbon filter

IONIZER
IONIZER button
Child Lock
Indicator
1h,2h,4h,8h
Timer switch
Filter Replacement
Indicator
SLEEP
Sleep
TIMER
CHILD-LOCK
Medium IONIZER Indicator
using the top buttons
Open and Replace back cover
To ensure proper air circulation,
leave at least 10” space between
wall or furniture and back air intake.
10 inch
10 inch
10 inch

Install filter
The 3 stage Medify
filter is a one-piece
filter for higher performance.
Remove by pulling on the
small tab at top. When reinstalling,
make sure to push back in and
make sure it is in snug for maximum
performance.
Remove filter by pulling on small
tab at top of filter.
Remove all plastic packaging from filter
before installing.
Do Not run the air purifier when no filter
is installed.
2.Press top buttons in the back cover
4.Remove plastic packaging from the
new filter before installing into the air
purifier.
5.Place new filter into the air purifier
with white side facing out to you.
The tab at top of filter should be facing
you.
6. Replace back cover

2.True HEPA h13 Filter 4.Ionizer
Removes large particles
such as: Dust, Dander, Hair
and others
HEPA H13 is a higher Grade of
HEPA than Hepa Type or True
HEPA.
Fourth step:
Second step:True HEPA h13 Filter
positive particles.
Produces negative ions to
IONIZER
Control panel
Plugging In Turning On The Air Purifier
SLEEP
purifier will beep. All the
indicator lights will flash 1
time,including the power
light indicator.Then machine
enters the standby mode.
Press ON/OFF button and unit will turn on.
Machine starts to work in low speed.
Press the button again, machine stops and
is in standby mode.
CHILD-LOCK

Press speed button to choose your
speed. Options are: 1,2,3 and Sleep
Mode.
Ionizer Mode
Ionizer is an On/Off function.
You can choose
to leave it on or off at your discretion. When
Ionizer is on, the indic light will be lit.
SLEEP
Unplug air purifier before cleaning the unit.
Do not use excess water to clean the unit.
Use a soft cloth or a soft moist cloth to wipe
down unit. Do not use cleaners or chemicals
on the air purifier at any time.
Cleaning Your Air Purifier
From time to time if you see excess
dust accumulate on the unit, wipe with
a clean dry cloth. Also make sure air
intake and vents are free from excess
dust. Do not vacuum or try and wash filter
as it will clog filter.

1.Indicator Lights will show the user
if filters need to be replaced.
2.Make sure to unplug before changing filter
3.Press the top buttons on the back cover
and pull the cover. Lift the back cover and pull
out slightly.
Reminds user when filter needs
replacement.
Indicator Icon will become lit when
filter needs to be changed.
5.Remove plastic packaging from the
new filter before installing into the air
purifier.Place new filter into the air purifier
with white side facing out to you. The
tab at top of filter should be facing you.
6. Replace back cover
7. Reset Filter indicator Light:
After new filter is installed and unit is turned
back on: Hold down the FAN SPEED button
and the IONIZER button at the same time
for 3-5 seconds and the indicator light will go
off and timer is reset for 3000 hours
4.Remover old filter from the unit.
Pull on the tab at the top to remove.

every six(6)months of after 3,000 hours of use.The filter replacement
will let you know when it is time to change.indicator
7.Warranty and service