Medion AKOYA User manual

Instruction Manual
29.5 cm / 11.6“ Tablet / Notebook
MEDION®AKOYA®

1 of 48
Table of Contents
1. About these Instructions............................................................................. 4
1.1. Symbols and Key words used in these Instructions................................... 4
1.2. Proper Use ................................................................................................................. 5
1.3. Declaration of Conformity................................................................................... 5
2. Safety Instructions....................................................................................... 6
2.1. Dangers for children and people with reduced ability to operate
electronics ................................................................................................................. 6
2.2. Operational Safety.................................................................................................. 6
2.3. Never Carry Out Repairs Yourself ..................................................................... 8
2.4. Data Backup.............................................................................................................. 8
2.5. Setup Location......................................................................................................... 8
2.6. Environmental Requirements ............................................................................ 8
2.7. Connecting................................................................................................................ 9
2.8. Cabling......................................................................................................................10
2.9. Notes on the integrated battery......................................................................11
2.10. Measures for protecting the display..............................................................12
3. Included with your Device ........................................................................ 12
4. Views........................................................................................................... 13
4.1. Front Side.................................................................................................................13
4.2. Left Side....................................................................................................................14
4.3. Bottom View of the Tablet Unit........................................................................14
5. First Use ...................................................................................................... 15
6. Power Supply ............................................................................................. 15
6.1. On/Off Switch.........................................................................................................15
6.2. Mains Power ...........................................................................................................15
6.3. Battery Mode..........................................................................................................17
6.4. Power Management (Power Options)...........................................................18
6.5. Sleep Mode .............................................................................................................19
7. Display ........................................................................................................ 19
7.1. Screen Resolution.................................................................................................21
7.2. Appearance and Customisation......................................................................22
8. The Sound System ..................................................................................... 23
8.1. External Audio Connections.............................................................................23
9. Network Operation.................................................................................... 24
9.1. What is a Network? ..............................................................................................24
9.2. Wireless LAN (Wireless Network) ....................................................................24
9.3. Bluetooth.................................................................................................................25
9.4. Flight Mode.............................................................................................................25
10. The Card Reader......................................................................................... 26
10.1. Inserting a Memory Card ...................................................................................26

2 of 48
11. The Universal Serial Bus Port ................................................................... 27
12. Securing Your Device................................................................................. 27
12.1. Password Setting (Power-on) ...........................................................................27
13. Software ..................................................................................................... 28
13.1. Getting to Know Windows®8............................................................................28
13.2. Windows Activation.............................................................................................28
13.3. Windows®8 – What’s New .................................................................................29
13.4. Overview..................................................................................................................31
13.5. Linking a User Account to a LiveID.................................................................32
13.6. Windows® 8 Start Screen....................................................................................32
13.7. Windows® 8 Desktop ...........................................................................................33
13.8. Using the Search Function ................................................................................36
13.9. Windows®8 Power On/Off Functions ............................................................36
13.10. Control Panel Settings.........................................................................................37
13.11. How to refresh or reset your device ..............................................................37
13.12. Windows®8 – Help and Support .....................................................................38
14. FAQ – Frequently Asked Questions .......................................................... 39
15. Customer Service....................................................................................... 40
15.1. What To Do In Case of Hardware Problems ................................................40
15.2. Faults and Possible Causes ................................................................................40
15.3. Do You Need More Help?...................................................................................41
15.4. Driver Support .......................................................................................................41
15.5. Transport..................................................................................................................41
15.6. Maintenance...........................................................................................................42
15.7. Upgrading/Modifying and Repair ..................................................................42
15.8. Notes for Service Technicians...........................................................................42
16. Recycling and Disposal.............................................................................. 43
17. European EN 9241-307 Class II Standard................................................. 43
18. Legal notice ................................................................................................ 45
19. Index ........................................................................................................... 46

3 of 48
Personal Information
Please append the following to your proof of ownership:
Serial number ................................................
Date of purchase ................................................
Place of purchase ................................................
You will find the serial number on the underside of the device. Where applicable,
also copy the number on your warranty documents.
Our Target Group
This operating manual is intended to be read by both first-time and experienced
users. Regardless of any possible professional use, this device is designed for use
in a private household. The entire family will be able to enjoy the wide variety of
applications it offers.
The Quality
We select our components with a close eye to functionality, ease of use, safety and
reliability. Thanks to our ideally balanced hardware/software concept we are able to
offer you a state-of-the-art device that you will enjoy whether you are working or at
play. Thank you for purchasing our products. We are delighted to welcome you as
our new customer.
Trademarks: MS-DOS®and Windows®8 are registered trademarks of the Microsoft®
corporation. Intel, the Intel Logo, Intel Inside, Intel Core, Ultrabook, and Core Inside
are trademarks of Intel Corporation in the U.S. and/or other countries.
®, the HDMI logo and the name High-Definition Multimedia Interface are
registered trademarks of HDMI Licensing LLC.
Other trademarks are the property of their respective owners.

4 of 48
1. About these Instructions
Before using the device for the first time, please read these operating
instructions carefully, paying special attention to the safety notices.
This device should only be used as designated and as described in these
instructions.
Please keep these instructions in a safe place for future reference.
Always include these instructions if passing the device on.
1.1. Symbols and Key words used in these
Instructions
DANGER!
Warning of immediate risk of fatal injury!
WARNING!
Warning: possible mortal danger and/or serious
irreversible injuries!
CAUTION!
Warning: possible light or moderate injuries!
CAUTION!
Please follow the guidelines to avoid injuries and/or
property damage.
PLEASE NOTE!
Additional information on using the device
PLEASE NOTE!
Please follow the guidelines in the operating instructions.
WARNING!
Warning: danger of electric shock!
WARNING!
Warning: danger due to excessive volume!
• Bullet point/information on operating steps and results
Tasks to be performed

5 of 48
1.2. Proper Use
This device is designed for the use, management and editing of electronic
documents and multimedia content, as well as for digital communication. The
device is intended for private use only and not for industrial/commercial use.
Please note that we shall not be liable in cases of improper use:
• Do not modify the device without our consent and do not use any auxiliary
equipment which we have not approved or supplied.
• Use only spare parts and accessories which we have supplied or approved.
• Follow all the instructions in this instruction manual, especially the safety
information. Any other use is deemed improper and can cause personal injury or
damage to the product.
• Do not use the device in extreme environmental conditions.
1.3. Declaration of Conformity
This product is supplied with the following wireless features:
• Wireless LAN (optional)
• Bluetooth (optional)
Use is only permitted inside buildings in all EU countries due to the 5 GHz
frequency band of the inbuilt Wireless LAN solution.
Medion AG hereby declares that this product conforms to the following European
requirements:
• R&TTE Directive 1999/5/EC
• Ecodesign Directive 2009/125/EC
• RoHS Directive 2011/65/EU
Full declarations of conformity are available at www.medion.com/conformity.

6 of 48
2. Safety Instructions
2.1. Dangers for children and people with reduced
ability to operate electronics
• This device is not intended for use by people (including children)
with reduced physical, sensory or mental abilities or for those
without experience and/or knowledge, unless they are supervised
by a person responsible for their safety or they have been
instructed in its use.
• Children should be supervised to ensure that they do not play
with the device. Children should not be allowed to use this device
without supervision.
• Keep the device and its accessories out of the reach of children.
DANGER!
Keep plastic packaging out of the reach of children. There
is a risk of suffocation.
2.2. Operational Safety
Please read this section carefully and follow all instructions given. The
instructions will help you to operate the Device reliably and increase
its service life.
• Never open the housing of the Device, battery or mains adapter!
This could result in an electric shock or even ignite a fire which will
damage your Device.
• Do not insert anything into the Device through the slots and
openings. This could result in an electric shock or even ignite a fire
which will damage your Device.
• The slots and openings on the Device are for ventilation purposes.
Do not cover these openings as this could cause the device to
overheat.

7 of 48
• The Device is not intended for use by companies in the heavy
industry sector.
• To avoid damage from lightning strikes, do not operate the Device
during thunderstorms.
• Do not place any objects on top of the Device and do not exert
pressure on the display. Otherwise, there is a risk that the display
may break.
• If the screen breaks, there is a danger of injury. If this happens, pick
up the shattered pieces wearing protective gloves and send them
to your service centre for professional disposal. Finally, wash your
hands with soap, as the pieces may have been contaminated with
chemicals.
• Do not fold the display back by an angle of more than 120°.
Exceeding this value may damage the housing or the Device.
Always hold the display firmly by the middle when folding it back,
adjusting the position and closing it. Failure to do so may damage
the display. Never use force to open the display.
• To avoid damaging the screen, do not touch it with sharp objects.
• Never lift the laptop up by the display as this could break the
mounting fixtures and the connectors.
• Place the tablet unit carefully and centrally in the mounting
fixtures on the base unit to avoid damage.
• Should the below occur, switch the Device off immediately/do
not switch the Device on, disconnect the mains plug and contact
customer services if
−the mains adapter or the attached power cable or plug is burnt
or damaged. Replace faulty mains cables/mains adaptors only
with original parts. These parts should not be repaired under
any circumstances.
−the Device housing is damaged or liquid has penetrated into
the device. Have the Device inspected by customer services.
Otherwise, it may not be possible to operate the Device safely.
There may be a risk of electric shock and/or harmful laser
radiation!

8 of 48
If the device gets wet,
• do not switch it on.
• disconnect the power cable and switch off the device.
• do not switch it back on until it has dried off completely.
2.3. Never Carry Out Repairs Yourself
WARNING!
Never try to open or repair the device yourself. There is a
risk of electric shock.
• If there is a fault, contact the Medion Service Center or other
suitable specialist workshop.
2.4. Data Backup
CAUTION!
Back up your data on external storage media before
each update. We do not accept any liability for claims for
compensation arising from loss of data or any consequential
loss or damage.
2.5. Setup Location
• Keep your device and all connected devices away from moisture
and avoid dust, heat and direct sunlight. Non-compliance with
these instructions can lead to faults or damage to the device.
• Do not use the device outdoors because external elements, such as
rain, snow, etc., could damage it.
• Set up and operate all components on a stable, level and vibration-
free surface to prevent the device from falling down.
• This device is not suitable for use with VDU workstations.
2.6. Environmental Requirements
• The device is most reliably operated at an ambient temperature
between 5° C (+41° F) and 25° C (+77° F) and at a relative humidity
between 20% and 80% (without condensation).
• When powered off, the device can be stored at temperatures
between 0° C and 60° C (+32° F and 140° F).

9 of 48
• During a thunderstorm, disconnect the mains plug and the
antenna plug. For extra safety, we recommend using an
overvoltage protection device to prevent the device from
sustaining damage as a result of power surges or lightning strikes.
• After transporting the device, wait until the device has reached
room temperature before switching it on. Large changes in
temperature or fluctuations in humidity can cause moisture build-
up within the device due to condensation. This can cause an
electrical short circuit.
• Keep the original packaging in the event the device needs to be
sent in the post.
2.7. Connecting
Follow the instructions below to connect your device correctly and
safely:
2.7.1. Power Supply
DANGER!
Do not open the housing of the mains adapter. There is a
risk of electric shock when the housing is open. It does not
contain any parts requiring maintenance.
• The socket outlet must be close to the device and easily accessible.
• To disconnect the power supply from your device (via the mains
adaptor), pull the mains plug from the power outlet.
• Plug the device’s mains adapter into AC 100–240 V~, 50/60 Hz
earthed sockets only. If you are not sure about the power supply at
the set-up location, please ask your power supplier.
• Use only the mains adapter and power cable supplied.
• For extra safety, we recommend using an overvoltage protection
device to prevent your device from sustaining damage as a result
of power surges or lightning strikes.
• If you want to disconnect the adapter from the mains, pull the
connector out of the wall socket first and then out of the socket
on the device. The mains adapter or the device may be damaged if
this process is carried out in the reverse order. Always take hold of
the plug when disconnecting the cable from the socket. Never pull
on the cable.

10 of 48
CAUTION!
Use only the supplied mains adapter to charge your device.
WARNING!
Listening to a device at high volumes for an extended
period via headphones/earphones can damage your
hearing. Excessive volume when using headphones or
earphones can damage your hearing. Before pressing
play, set the volume to the lowest setting. Start playback
and increase the volume to a comfortable level. Changing
the basic settings of the equaliser can also increase the
volume and thus cause permanent damage to your
hearing. Changing the drivers, software, equaliser,
operating system, etc., can also lead to an increase in
the volume and thus cause permanent damage to your
hearing.
2.8. Cabling
• Position the cables so that they cannot be stepped on or tripped
over.
• To avoid damaging the cables, do not place any objects on them.
• Do not connect peripheral devices – such as keyboards, mouse and
monitor, etc. – when the device is switched on to avoid damage
to the device or the devices. Some devices may also be connected
while the computer is running. This is generally the case for devices
with a USB connection. In all cases, observe the relevant operating
instructions.
• Maintain a distance of at least one metre from sources of high-
frequency and magnetic interference (TV sets, loudspeakers,
mobile phones, DECT telephones, etc.) in order to avoid
malfunctions and data loss.
• Please note that only shielded cables that are shorter than 3 metres
may be connected to the external interfaces of this device. Please
only use double-shielded cables for printer cable connections.

11 of 48
• Do not exchange the supplied cable for another one. Use only
the supplied cable as this cable has been extensively tested in our
laboratory.
• In addition, when connecting your peripherals only use the
connecting cables supplied with those devices.
• Ensure that all connection cables are connected to their
corresponding peripheral device to avoid any interference
radiation. Disconnect any cables that are not required.
• The only devices which may be connected to the device are those
that meet the requirements set out in the EN60950 standard
“Information Technology Equipment – Safety”or devices that
meet the EN60065 standard “Audio, video and similar electronic
apparatus – Safety requirements”.
2.9. Notes on the integrated battery
CAUTION!
Danger of explosion if batteries are incorrectly
replaced. Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the manufacturer‘s
instructions. Never attempt to disassemble or reassemble.
Do not heat up above 60°C (140°F). Do not dispose of in
fire or directly short circuit.
This device contains two integrated batteries. To increase the lifespan
and performance of your batteries and also to ensure reliable opera-
tion, you should also heed the following instructions:
• Use only the supplied mains adaptor to charge the batteries. Make
sure (via the display or acoustic signal) that the batteries are fully
discharged before charging them again.
• Always charge the batteries until the battery charging light goes
out. Please also observe the information in “Charging the batteries”
to assess the charge status of your batteries.
• The batteries are built into the devices and should only be
removed by a qualified technician/the Service Centre.

12 of 48
2.10. Measures for protecting the display
• The display is the most sensitive component part of the device
as it consists of thin glass. It can break if subjected to too much
stress. Do not scratch the cover of the device, because it will not be
possible to remove any scratches.
• Avoid contact between the display and hard objects (e.g. buttons,
wristwatch).
• Do not place any objects on the display.
• Do not allow any objects to drop onto the display.
• Do not pour any fluids into the device, as this could damage it.
• Do not scratch the display with your fingernails or hard objects.
• Do not clean the display with chemical cleaning products.
• Clean the display with a soft, dry and lint-free cloth.
PLEASE NOTE!
The surfaces of the device are covered in protective film to prevent
scratching during production and transport.
Remove the film once the device has been set up properly and before
you use it.
3. Included with your Device
Please check that the contents are complete and notify us within 7 days of purchase
if any of the following components are missing:
• Device
• AC Adapter with Power Cord
• OEM version of operating system
• Documentation
DANGER!
Keep packaging material such as plastic film away from
children. There is a risk of suffocation if used improperly!

13 of 48
4. Views
4.1. Front Side
2
4
5
3
6
1
1) Microphone
2) Webcam
3) Webcam LED
4) LCD Display
5) Battery LED
6) Light Sensor

14 of 48
4.2. Left Side
10 11 12 13 14
89
7
7) Reset opening for the tablet unit
8) USB 3.0 Port
9) USB 2.0 Port
10) microHDMI Connector
11) microSD Card Slot
12) Audio Out / Microphone
13) Volume Buttons +/-
14) Power ON/OFF
4.3. Bottom View of the Tablet Unit
1615
15) Power Socket
16) Connection plug to the base unit

15 of 48
5. First Use
To operate your device safety and ensure a long service life, you should read the
“Operational safety” chapter at the beginning of this manual. All operating software
is already fully preinstalled on the device so there is no need for you to install any
more drivers and you can get started right away.
Connect the supplied mains adapter to the device (15). Next, connect the power
cable to the adapter and then plug it into a mains socket.
Switch the device on by pressing the on/off switch (14). The device will now start
and run through various steps.
The operating system will be loaded from the hard drive. The loading process takes
a little longer during the initial setup. Once all the necessary data has been entered,
the operating system will be set up. The operating system is fully loaded once the
Windows®8 start-up screen appears.
PLEASE NOTE!
The initial installation may take a few minutes. Do not unplug the device
from the mains or switch it off during the initial installation. This may
adversely affect the installation. Do not switch off the device until after
the installation has been completed successfully and the startup screen
appears.
6. Power Supply
6.1. On/Off Switch
Open the device and hold the on/off switch down briefly to switch the device on
or off.
Regardless of the operating system, the device will switch off if the switch is held
down for longer than 4 seconds continuously.
CAUTION!
Do not switch your device off while the hard drive is being
accessed. Otherwise data may be lost. To protect the hard
drive, you should always wait for 5 seconds after switching off
the device before switching it back on again.
6.2. Mains Power
Your device comes with a universal mains adapter for alternating current which
automatically adapts to the available power source. The following values are
supported: AC 100–240 V~/50–60 Hz. Observe the safety information concerning
the power supply. The adapter is connected to an AC outlet via a mains cable.
The DC power cable of the mains adapter is connected to the underside of the
tablet unit (15).

16 of 48
The adapter supplies the device with power and also charges the battery. Your
battery will also be charged while you work on your device with the mains adapter
connected. The mains adapter also consumes power when the device is not
connected to it. You should therefore always remove the mains adapter plug from
the socket when it is not connected to the device.
CAUTION!
Use only the mains adapter and power cable supplied.
6.2.1. Starting the device
Open up the display as described above and press the on/off switch.
Follow the instructions on the screen. Step-by-step instructions will guide you
through the process to be followed.
The welcome procedure takes you through several screens and dialogues.
Select your desired language and then the corresponding country settings.
Licence Agreement
Please read through the licence agreement carefully. It provides important legal
information about the use of your software product. To view the text in full, you
must slide the scroll bar downwards using the mouse until you reach the end of
the document. You accept the licence agreement by checking the I accept the
agreement radio button. Only this entitles you to use the product in accordance
with the terms and conditions.
After entering a computer name you can connect your device to the Internet
immediately on the “Wireless”page (if you already have an appropriate Internet
connection set up).
If you choose to skip this point, you can connect to the Internet later via the
Windows®8 interface.
If you have already set up an Internet connection, you can now log in to your device
using a Microsoft account.
The Microsoft Store allows you to purchase new apps or update previously installed
apps.
If you log in on a local account, you can set up a Microsoft account later at any time.
The following animated windows simply contain information about using the new
Windows®8 operating system.
No entries of any kind may be made during the animation.
The Windows®8 interface appears after the login process.
PLEASE NOTE!
In the first few days following the initial installation, Windows® 8 may
update and configure data (e.g. with new updates) which can result
in delays in the device shutting down and starting up. For this reason,
do not switch the device off prematurely. This may adversely affect the
installation.

17 of 48
6.3. Battery Mode
PLEASE NOTE!
Please charge and discharge the new batteries completely two or
three times consecutively to ensure that it reaches their optimum
performance! Batteries store electrical energy in their cells and then
release it again as required.
The service life and performance of your batteries depend on careful handling.
The batteries should always be completely discharged before charging and then
fully charged again to optimise the service life and performance.
Please also take note of the safety instructions on„Safety Instructions“.
6.3.1. Charging the Batteries
The batteries are charged using the mains adapter. When the mains adapter is
connected and switched on, the batteries charge automatically regardless of
whether or not the device is switched on or not. A complete charge takes a few
hours with the device switched off. With the device switched on, the charging
process takes significantly longer.
PLEASE NOTE!
The charging process is interrupted if the battery voltage or
temperature gets too high.
6.3.2. Discharging the battery
Operate the device on battery power until it turns itself off due to low battery
charge.
PLEASE NOTE!
Be sure to save your open files promptly to prevent any data loss.
6.3.3. Battery Performance
The actual operating time varies depending on the configuration of the power-
saving functions. You can configure these to suit your requirements in the Control
Panel under System and Security, Power Options. Note: your device consumes
more power when running certain applications.

18 of 48
6.3.4. Checking the Battery Charge
To check the current battery charge status, move the cursor over the power icon in
the task bar. In battery mode, the icon is displayed as a battery.
You can obtain more information about settings by double-clicking the icon.
PLEASE NOTE!
If you ignore the low battery warning, your device will shut down.
6.4. Power Management (Power Options)
Your device offers automatic and customisable power-saving and energy functions
that can be used to optimise battery life and reduce the overall operating costs.
6.4.1. Power Management Settings
Follow the instructions below to adjust the power management settings:
Drag the mouse cursor to the left corner of the screen and Start icon will show
up.
Right click on the icon to show selection menu. Select Control Panel in the
menu.
Click on System and Security.
Then click on Power Options.
Select a power plan that meets your personal needs.
The Power icon will present various and relative options:
You can wake up your computer from power saving mode by pressing the
On/Off button.