MeiTrack MS02 Setup guide

File Name:
MEITRACK MS02 Quick Start
Creator:
Cavana Cheung
Project:
GPS Tracking System
Creation Date:
Update Date:
2010-05-25
2013-06-27
Sub Project:
MS02
Page:
- 1 - of 8
Revision:
V2.6
Confidential:
External Documentation
MEITRACK® GPS Tracking System
Quick Start User Guide
MS02
Copyright © 2013 Meitrack Group All rights reserved. - 1 -

File Name:
MEITRACK MS02 Quick Start
Creator:
Cavana Cheung
Project:
GPS Tracking System
Creation Date:
Update Date:
2010-05-25
2013-06-27
Sub Project:
MS02
Page:
- 2 - of 8
Revision:
V2.6
Confidential:
External Documentation
Contents
1. Quick Start ..................................................................................................................................................................- 3 -
1.1 Device Configuration .......................................................................................................................................- 3 -
1.1.1 By SMS Commands ......................................................................................................................- 3 -
1.1.2 By Parameter Editor.............................................................................................................................- 4 -
1.2 Login MS02.......................................................................................................................................................- 5 -
1.3 Add New Device...............................................................................................................................................- 6 -
1.4 Check Status Updates ......................................................................................................................................- 7 -
Copyright © 2013 Meitrack Group All rights reserved. - 2 -

File Name:
MEITRACK MS02 Quick Start
Creator:
Cavana Cheung
Project:
GPS Tracking System
Creation Date:
Update Date:
2010-05-25
2013-06-27
Sub Project:
MS02
Page:
- 3 - of 8
Revision:
V2.6
Confidential:
External Documentation
1. Quick Start
1.1 Device Configuration
The device can be configured either by step 1.1.1 or 1.1.2. Please refer to the user manual of each model for
more details.
1.1.1 By SMS Commands
Model Configuration
GT30i, GT60, VT300,
VT310, VT400
A. Set Tracker (GPRS) ID
SMS Command: W000000,010,S/N
Check the S/N barcode label from the device’s case or PCB
. This is the identification
number for the device in MS02 and it cannot be changed.
For example, if the S/N reads as 4037828853, the SMS command you need to send as
follows,
W000000,010, 4037828853
B. Set APN
SMS Command: W000000,011,APN,APN Username,APN password
Note: if no APN username and password required, leave them blank.
For example, if in China mainland using China Mobile’s SIM c ar d, the SMS command is as
follows:
W000000,011,CMNET
If in China mainland using China Union com’s SIM card, the SMS command is as follows:
W000000,011,UNINET
C. Set IP Address and Port
SMS Command: W000000,012, IP address,Port
For example, if you use our sever, the SMS command is as follows:
W000000,012,67.203.13.26,8500
D. Enable GPRS
SMS Command: W000000,013,1
E. Set GPRS Interval
SMS Command: W000000,014,XXXXX
XXXXX should be in five digits and in unit of 10 seconds.
For example, if you want the tracker to report to the server every one minute, SMS
command is as follows:
Copyright © 2013 Meitrack Group All rights reserved. - 3 -

File Name:
MEITRACK MS02 Quick Start
Creator:
Cavana Cheung
Project:
GPS Tracking System
Creation Date:
Update Date:
2010-05-25
2013-06-27
Sub Project:
MS02
Page:
- 4 - of 8
Revision:
V2.6
Confidential:
External Documentation
W000000,014,00006
MT80i,MT88,MT90,
MVT100,MVT340,
MVT380, MVT600, T1
SMS Command: Password,A21,X,IP,Port,APN,APN Username,APN Password
Default password is 0000.
X = 0, close GPRS;
X = 1, TCP;
X = 2 , U D P.
IP : IP address or domain name, max 32 bytes.
Port: max 5 bytes.
APN / APN username / APN password: max 32 bytes;
If no username and password required, leave them blank.
Example: 0000,A21,1,67.203.13.26,8500,CMNET,,
1.1.2 By Parameter Editor
Do the GPRS settings in Parameter Editor. Refer to user guide of Parameter Editor for more details.
Parameter Editor for GT30i, GT60, VT300, VT310, VT400, MT80i, MT88, MT90, MVT100, MVT340, MVT380,
MVT600 and T1
Copyright © 2013 Meitrack Group All rights reserved. - 4 -

File Name:
MEITRACK MS02 Quick Start
Creator:
Cavana Cheung
Project:
GPS Tracking System
Creation Date:
Update Date:
2010-05-25
2013-06-27
Sub Project:
MS02
Page:
- 5 - of 8
Revision:
V2.6
Confidential:
External Documentation
Check GPRS and select TCP/UDP.
Enter the Tracker ID which is the only identification number.
For GT30i/GT60/VT300/VT310/VT400, check the S/N barcode from the device’s case or PCB. If the S/N reads:
4037828853 then please fill this blank with 4037828853;
For MT80i/MT88/MT90/MVT100/MVT340/MVT380/MVT600/T1, the Tracker ID is tracker’s IMEI which will be
shown on Parameter Editor.
Enter APN, APN Username, APN Password. You can leave them blank if no APN username or password is required.
Enter the IP address of the server. Meitrack China Server ’s IP: 125.91.12.222, Port: 8500,8600, US Server’s IP:
67.203.13.26, Port: 8600,8601,8602.
Notice: only one port available for trackers of Meiligao Protocol；
two ports available for trackers of Meitrack Protocol, one of them as backup in case the first port fails to send
GPRS data.
Interval: Enter the interval you want the tracker to report to the server.
Then click “Apply” or “Write”.
1.2 Login MS02
Go to the tracking website:
http://www1.trackingmate.com or http://www1.trackinguide.com (US server)
http://www.trackingmate.com or http://www.trackinguide.com (China server)
User ID and Password are issued by Meitrack.
Copyright © 2013 Meitrack Group All rights reserved. - 5 -

File Name:
MEITRACK MS02 Quick Start
Creator:
Cavana Cheung
Project:
GPS Tracking System
Creation Date:
Update Date:
2010-05-25
2013-06-27
Sub Project:
MS02
Page:
- 6 - of 8
Revision:
V2.6
Confidential:
External Documentation
Mobile login
For more details, please refer to Part 3, MS02 mobile tracking
1.3 Add New Device
After Login the system, click “Manage”“Adm in”.
Click your user name in the Navigation. At the bottom of the right hand side, there are three options as follows:
Click “Add a New Device” then you can start adding devices to the tracking system.
Copyright © 2013 Meitrack Group All rights reserved. - 6 -

File Name:
MEITRACK MS02 Quick Start
Creator:
Cavana Cheung
Project:
GPS Tracking System
Creation Date:
Update Date:
2010-05-25
2013-06-27
Sub Project:
MS02
Page:
- 7 - of 8
Revision:
V2.6
Confidential:
External Documentation
Device ID: The S/N or IMEI of the device. Device cannot be added if this number is incorrect.
For GT30i/GT60/VT300/VT310/VT400, check the S/N barcode from the device’s case or PCB. If the S/N reads:
4037828853 then please fill this blank with 4037828853
For MT80i/MT88/MT90/MVT100/MVT340/MVT380/MVT600/T1, the Tracker ID is tracker’s IMEI.
Password: The user’s password for sending SMS commands. Default password as follows:
000000 for GT30i, GT60, VT300, VT310 and VT400;
0000 for MT80i, MT88, MT90, MVT100, MVT340, MVT380, MVT600 and T1.
If you’ve changed the password, please use the latest one.
Device Name: This name will be shown in the system. You can name the device by vehicle license number, name
of the driver or even company’s name.
SIM Number: The phone number of the SIM card in the device.
Model: The model of the device you would like to add. Please choose the correct model (this is very important).
1.4 Check Status Updates
The updated status of the device is right below the map. Select the device by check the box in the control panel.
And it will show the updates of the device.
When sent commands failed, you can check this updates to see if the devices have sent data to the server.
After adding a new device, you can check this updates to see if the device is online already.
S/N or IMEI
Copyright © 2013 Meitrack Group All rights reserved. - 7 -

File Name:
MEITRACK MS02 Quick Start
Creator:
Cavana Cheung
Project:
GPS Tracking System
Creation Date:
Update Date:
2010-05-25
2013-06-27
Sub Project:
MS02
Page:
- 8 - of 8
Revision:
V2.6
Confidential:
External Documentation
If you have any questions, please send e-mail to [e-mail]. We are here to help you.
Copyright © 2013 Meitrack Group All rights reserved. - 8 -