MeiTrack T622 Series User manual

MEITRACK T622 Series User Guide
MEITRACK T622 Series User Guide

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 2 -
Change History
File Name
MEITRACK T622 Series User Guide
Project
T622/T622G/T622E
Creation Date
Update Date
2015-09-30
2021-02-03
Subproject
User Guide
Total Pages
19
Version
V1.3
Confidential
External Documentation

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 3 -
Contents
1 Copyright and Disclaimer...............................................................................................................................................................- 4 -
2 Product Introduction .....................................................................................................................................................................- 4 -
2.1 Product Overview ...............................................................................................................................................................- 4 -
2.2 Product Functions...............................................................................................................................................................- 4 -
2.2.1 Position Tracking......................................................................................................................................................- 4 -
2.2.2 Anti-Theft.................................................................................................................................................................- 4 -
2.2.3 Monitoring...............................................................................................................................................................- 5 -
2.2.4 Other Functions .......................................................................................................................................................- 5 -
2.2.5 Functions of Optional Accessories...........................................................................................................................- 5 -
2.3 Product Features.................................................................................................................................................................- 5 -
2.3.1 Garmin Navigator.....................................................................................................................................................- 5 -
2.3.2 Harsh Acceleration/Braking Alarm...........................................................................................................................- 6 -
2.3.3 Roaming Mode ........................................................................................................................................................- 6 -
2.3.4 CAN Bus Interface ....................................................................................................................................................- 6 -
2.3.5 GPS Data Filtering ....................................................................................................................................................- 7 -
2.3.6 Activating Output by Event......................................................................................................................................- 7 -
2.4 Specifications......................................................................................................................................................................- 8 -
2.5 Tracker and Accessories......................................................................................................................................................- 9 -
2.6 About the T622 device........................................................................................................................................................- 9 -
2.6.1 Appearance..............................................................................................................................................................- 9 -
2.6.2 LED Indicator..........................................................................................................................................................- 10 -
2.6.3 I/O Cable................................................................................................................................................................- 10 -
3 First Use.......................................................................................................................................................................................- 12 -
3.1 Installing the SIM Card......................................................................................................................................................- 12 -
3.2 Charging the Device..........................................................................................................................................................- 12 -
3.3 Configuring Device Parameters by Meitrack Manager .....................................................................................................- 12 -
3.4 Installing GPS and GSM Antennas.....................................................................................................................................- 13 -
3.5 Device Connection Diagram..............................................................................................................................................- 14 -
3.6 Mounting the Tracker .......................................................................................................................................................- 15 -
3.7 Tracking by Mobile Phone.................................................................................................................................................- 15 -
3.8 Common SMS Commands ................................................................................................................................................- 17 -
3.8.1 Setting Authorized Phone Numbers –A71 ............................................................................................................- 17 -
3.8.2 Setting the Smart Sleep Mode –A73.....................................................................................................................- 17 -
3.8.3 Setting GPS Data Filtering –D71............................................................................................................................- 18 -
3.8.4 Setting Output Triggering –D72 ............................................................................................................................- 18 -
3.8.5 Allocating GPRS Cache and GPS Log Storage Space –D73.....................................................................................- 18 -
4 Logging In to MS03 Tracking System............................................................................................................................................- 19 -

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 4 -
1Copyright and Disclaimer
Copyright © 2021 MEITRACK. All rights reserved.
and are trademarks that belong to Meitrack Group.
The user manual may be changed without notice.
Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for any
purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying and recording.
Meitrack Group shall not be liable for direct, indirect, special, incidental, or consequential damages (including but not limited to
economic losses, personal injuries, and loss of assets and property) caused by the use, inability, or illegality to use the product
or documentation.
2Product Introduction
2.1 Product Overview
The T622 series includes 3 device models: T622, T622G, T622E, distinguishing 2G, 3G, LTE CAT M1 & CAT NB1 network versions.
With CANBUS function that supports FMS (Fleet Management System) protocol, and can support accessories such as: iButton,
Garmin navigation screen and LLS fuel sensor. It is a brand new high-end vehicle GPS tracker with market-proven quality and
precise positioning. And it supports various peripherals and can be installed into taxies, freight cars, and buses.
2.2 Product Functions
2.2.1 Position Tracking
⚫GPS + LBS positioning
⚫Real-time location query
⚫Track by time interval
⚫Track by distance
⚫Cornering report
⚫Track by mobile phone
⚫GPS data filtering
2.2.2 Anti-Theft
⚫SOS alarm
⚫GPS antenna cut-off alarm
⚫External power supply cut-off alarm
⚫GPS blind spot alarm
⚫Remote vehicle fuel/power cut-off
⚫Engine or vehicle door status alarm
⚫Towing alarm
⚫Polygonal geo-fence alarm

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 5 -
2.2.3 Monitoring
⚫Harsh acceleration and braking detection
⚫Idling detection
⚫Fatigue driving reminder and monitoring
⚫Speeding reminder and monitoring
⚫Driver authorization detection
⚫Fuel level monitoring
⚫Temperature monitoring
⚫Vehicle CANBUS data monitoring
2.2.4 Other Functions
⚫SMS/GPRS (TCP/UDP) communication (Meitrack protocol)
⚫Built-in 8 MB buffer for recording driving routes (storing 256 SMS cache records. The quantity of GPRS cache and GPS logs
can be set and their sum is a fix value.)
⚫Mileage report
⚫Low power alarm for internal battery
⚫Roaming mode
⚫Over-the-Air (OTA) update
⚫Activate output by event
⚫Stop Moving and Start Moving alarms
⚫MS03 Online Parameter Editor
2.2.5 Functions of Optional Accessories
Optional Accessories
Function
A53 resistive fuel level sensor
Check the fuel level.
A52 digital temperature sensor + A61 sensor box
Check temperature.
iButton
Identify the driver ID and grant permission to start the vehicle.
Monitor driver attendance by RFID report.
2 RS232 ports
Garmin navigator
Used for vehicle navigation and tracking
A83 Camera (Used with a Micro SD
card)
Take photos.
Liquid level sensor (LLS) sensor
Check the fuel level and detect a fuel theft alarm.
A76 ultrasonic fuel level sensor
Check the fuel level and detect a fuel theft alarm.
RFID reader
Identify the driver ID and grant permission to start the vehicle.
Monitor driver attendance by RFID report.
2.3 Product Features
2.3.1 Garmin Navigator
After the device is connected to a Garmin navigator, the GPS navigation, information dispatching, and location query functions
become available. The device can connect to the Garmin navigator which supports FMI protocol V2.5 or later, and you must

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 6 -
purchase the Garmin data cable.
For details about the Garmin navigator, please visit the website:
http://www8.garmin.com/solutions/mobile-resource-management/supported-devices/.
For details about how to install and use the Garmin navigator, see the Garmin Navigator User Guide.
2.3.2 Harsh Acceleration/Braking Alarm
You can detect the harsh acceleration/braking alarm by setting the limit value.
Cautions on device installation:
1. The device should be installed into the vehicle according to the following direction.
2. The device installation angle cannot exceed 15 degrees.
The default harsh acceleration and braking alarm values are 200 mG and -250 mG respectively.
Note: The alarm results vary according to the device installation, vehicle model, vehicle weight, and driving behaviors. After the
device has been installed properly, you can use the Meitrack Manager software to adjust the harsh acceleration and braking
alarm values by every 10 mG. You can also use the D78 command to set the values.
2.3.3 Roaming Mode
On the Meitrack Manager page, device parameters in roaming mode differ from that in non-roaming mode. When the device
detects that it is in roaming mode, it will be operated according to roaming parameters. This helps to save network traffic and
learn about device working status.
2.3.4 CAN Bus Interface
The device can read CAN bus data of a vehicle that supports the FMS protocol.
The following data can be read: vehicle speed, vehicle control status, accelerator pedal position (%), total fuel consumption,
engine rotational speed, total engine run time, total mileage, engine coolant temperature, fuel level, engine torque, ambient
temperature, torque at current speed, fuel consumption rate, axle weight, service distance, and instantaneous fuel
consumption.
Caution:
1. To obtain the preceding data, the vehicle must support the FMS protocol.
2. Install the device based on vehicle types. Connect vehicle's CANH and CANL wires to tracker's CANH and CANL connectors
respectively.

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 7 -
2.3.5 GPS Data Filtering
The GPS data filtering function can ensure GPS data accuracy and eliminate static drift.
You can set the following parameters by Meitrack Manager: GPS speed range, GPS positioning accuracy, and Number of GPS
satellites. When the GPS data filtering function is enabled, if all conditions are met, GPS data will be updated. Otherwise, GPS
data will be invalid.
Note: This function can be enabled by Meitrack Manager.
2.3.6 Activating Output by Event
You can activate output by event.
For example:
1. When speeding is detected, the device can control buzzer sounds.
2. When unauthorized ignition or GPS antenna cut-off is detected, the engine will not be able to start.
3. When RFID triggering is detected, the device can control the vehicle door.
4. When input or output status is detected, the output will be active or inactive.

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 8 -
2.4 Specifications
Item
Specifications
Dimension
105 mm x 65 mm x 26 mm
Weight
190g
Power supply
DC 11.4–36 V/1.5 A
Backup battery
400 mAh/3.7 V
Power consumption
Current in sleep mode: 11 mA
Operating temperature
-10°C to 55°C
Operating humidity
5% to 95%
Working hour
45 hours in power-saving mode
4 hours in normal mode
LED indicator
Green indicator showing the GSM signal
Blue indicator showing the GPS signal
Button/Switch
1 power button
Memory
8 MB buffer
Sensor
3-axis accelerometer (used to wake the device up by vibration and detect towing
alarms)
Frequency band
T622
GSM/GPRS: 850/900/1800/1900 MHz
T622G
UMTS/HSDPA: 800/850/900/1900/2100 MHz
GSM/GPRS: 850/900/1800/1900 MHz
T622E
Cat M1 & Cat NB1：
LTE FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28
LTE TDD: B39(for Cat M1 only)
EGPRS: 850/900/1800/1900
GNSS
GPS
GPS sensitivity
-161 dB
Positioning accuracy
2.5m
I/O port
3 digital inputs (1 negative trigger, 1 positive trigger, and 1 positive/negative
selectable trigger)
2 analog detection inputs
2 outputs
1 RS232 EXT port
1 RS232/485 port
1 USB port
1 digital sensor port
1 CAN bus interface

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 9 -
2.5 Tracker and Accessories
T622/T622G/T622E and standard accessories:
⚫T622/T622G/T622E tracker
⚫External GSM antenna
⚫External GPS antenna
⚫I/O cable(without SOS button) 1 meter
⚫CD download card
⚫Micro serial USB cable
Optional accessories:
⚫SOS button
⚫iButton
⚫Relay (12 V/24 V)
⚫A53 fuel level sensor (voltage sensor)
⚫A52 digital temperature sensor + A61 sensor box
⚫RFID reader
⚫Garmin navigator
⚫Camera
⚫A76 ultrasonic fuel level sensor
⚫Liquid level sensor (LLS) sensor
2.6 About the T622 device
2.6.1 Appearance

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 10 -
2.6.2 LED Indicator
Press and hold down the power button for 3–5 seconds to start the device.
GPS Indicator (Blue)
Steady on
A button or an input is triggered.
Blink (every 0.1 seconds)
The device is being initialized or the battery power is low.
Blink (0.1 seconds on and 2.9 seconds off)
A GPS signal is received.
Blink (1 second on and 2 seconds off)
No GPS signal is received.
GSM Indicator (Green)
Steady on
A call is coming in or a call is being made.
Blink (every 0.1 seconds)
The device is being initialized.
Blink (0.1 seconds on and 2.9 seconds off)
A base station signal is received.
Blink (1 second on and 2 seconds off)
No base station signal is received.
2.6.3 I/O Cable
The I/O cable is a 14-pin cable, including the power, analog input, digital temperature sensor input, negative/positive input and
output, and CAN bus interfaces.
1
Power (+)
3
Input 1
5
Input 2
7
Input 3
9
Fuel level sensor
11
Output 2
13
CANH
2
GND (-)
4
GND (-)
6
GND (-)
8
AD input 1
10
Output 1
12
Digital sensor/iButton
14
CANL
Pin Number
Color
Description
1 (Power +)
Red
Positive charge of the power input, connected to the positive
charge of the vehicle battery. Input voltage: 11–36 V. 12 V is
recommended.
2 (GND)
Black
Ground wire, connected to the negative charge of the vehicle
battery or to the negative terminal.
3 (Input 1)
White
Digital input 1, negative trigger (SOS button by default)
4 (GND)
Black
Ground wire, connected to input 1 (SOS button)
5 (Input 2)
White
Digital input 2. Positive trigger by default. You can switch to
negative trigger.

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 11 -
Connect to a door trigger signal cable to detect vehicle door
status.
6 (GND)
Black
Ground wire
It can be used as a ground wire connected to an analog sensor.
7 (Input 3)
White
Digital input 3 (positive trigger)
Voltage range: 3~60V
Connect to the vehicle ACC cable by default to detect the vehicle
ACC status.
8 (AD Input 1)
Blue
Analog input 1 with 12-bit resolution and valid voltage 0–6.6 V
Connect to an external sensor, such as the fuel level sensor.
9 (Fuel level sensor
input)
Blue
Analog input 2 with 12-bit resolution and valid voltage 0–6.6 V
The AD cable is equipped with a white plug. It is connected to the
A53 fuel level sensor by default.
10 (Output 1)
Yellow
Output 1
Default: low level (0 V)
Invalid: open collector
Maximum voltage for output open collector (invalid): 40 V
Maximum current: 400 mA
High level triggering mode and PWM triggering mode are allowed
to set.
Connect to an external relay to remotely cut off the vehicle fuel
cable or engine power supply.
11 (Output 2)
Yellow
Output 2
Valid: low level (0 V)
Invalid: open collector
Maximum voltage for output open collector (invalid): 40 V
Maximum current: 400 mA
High level triggering mode and PWM triggering mode are allowed
to set.
Connect to an external relay to remotely cut off the vehicle fuel
cable or engine power supply.
12 (Digital sensor input
port/iButton)
Green
TTL3.3V level
Connect to the A52 digital temperature sensor by default by using
the A61 sensor box. It also can be connected to iButton.
Note: The DC or AC voltage that is greater than 3.3 V is not
allowed. Otherwise, the device may be damaged.
13 (CANH)
Orange and white
Used to connect a CAN bus peripheral.
14 (CANL)
Orange
Used to connect a CAN bus peripheral.

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 12 -
3First Use
3.1 Installing the SIM Card
1. Loosen the screws, and remove the front cover of the device.
2. Insert the SIM card into the card slot with its gold-plated contacts facing towards the Printed Circuit Board (PCB).
3. Close the cover, and tighten the screws.
Note:
⚫Power off the device before installing the SIM card.
⚫Ensure that the SIM card has sufficient balance.
⚫Ensure that the phone card PIN lock has been closed properly.
⚫Ensure that the SIM card in the device has subscribed the caller ID service if you want to use your authorized phone
number to call the device.
3.2 Charging the Device
When you use the device for the first time, connect the device GND (-Black) and Power (+Red) wires to 12 V or 24 V external
power supply for charging. Ensure that the device is charged at least two hours. Eight hours are recommended.
The device can be installed on a vehicle only after it is configured and tested.
3.3 Configuring Device Parameters by Meitrack Manager
This section describes how to use Meitrack Manager to configure the device on a computer.
Procedure:

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 13 -
1. Install the USB-to-serial cable driver and Meitrack Manager.
2. Connect the device to a computer by using the USB-to-serial cable.
3. Run Meitrack Manager, then the following dialog box will appear:
4. Turn on the device, then Meitrack Manager will detect the device model automatically and the parameter page will
appear accordingly.
For details about MEITRACK Manager, see the MEITRACK Manager User Guide.
3.4 Installing GPS and GSM Antennas
GPS antenna GSM antenna
Connect the GSM antenna to the connector which is labeled "GSM". The GSM antenna is non-directional, so you can hide it in
any place of a vehicle.
Connect the GPS antenna to the connector which is labeled "GPS". It is recommended that the antenna is facing up to the sky
and the antenna side with words is downwards. Secure the antenna by using double sided tapes.
Note: Do not install the GPS antenna at a metal covered place.

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 14 -
3.5 Device Connection Diagram

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 15 -
3.6 Mounting the Tracker
Tighten the four screws shown in the following figure.
3.7 Tracking by Mobile Phone
Call or send the 0000,A00 command by SMS to the device's SIM card number. The device will reply to an SMS with a map link.
Click the SMS link. The device's location will be displayed on Google Maps on your mobile phone.
Note: Ensure that the device's SIM card number has subscribed the caller ID service. Otherwise, the tracking function by mobile
phone will be unavailable.

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 16 -
SMS example:
Now,061314 10:36,V,26,0Km/h,96%,http://maps.meigps.com/?lat=22.513781&lng=114.057183
The following table describes the SMS format:
Parameter
Description
Remarks
Now
Indicates the current location.
SMS header: indicates the current location
or the alarm type.
061314 10:36
Indicates the date and time in
MMDDYY hh:mm format.
None
V
The GPS is invalid.
A = Valid
V = Invalid
26
Indicates the GSM signal strength.
Value: 1–32
The larger the value is, the stronger the
signal is. If the value is greater than 12,
GPRS reaches the normal level.
0Km/h
Indicates the speed.
Unit: km/h
96%
Indicates the remaining battery power.
None
http://maps.meigps.co
m/?lat=22.513781&lng
=114.057183
Indicates the map link.
Latitude: 22.513781
Longitude: 114.057183
None

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 17 -
3.8 Common SMS Commands
3.8.1 Setting Authorized Phone Numbers –A71
SMS sending: 0000,A71,Phone number 1,Phone number 2,Phone number 3
SMS reply: IMEI,A71,OK
Description:
Phone number: A phone number has a maximum of 16 bytes. If no phone numbers are set, leave them blank. Phone numbers
are empty by default.
Phone number 1/2/3: SOS phone numbers. When you call the tracker by using these phone numbers, you will receive SMS
notification about the location, geo-fence alarm and low power alarm.
If you need to delete all authorized phone numbers, send 0000,A71.
When the SOS button is pressed, the tracker will dial phone numbers 1, 2, and 3 in sequence. The tracker will stop dialing when
a phone number responds.
Example:
Sending: 0000,A71,13811111111,13822222222,13833333333
Reply: 353358017784062,A71,OK
3.8.2 Setting the Smart Sleep Mode –A73
SMS sending: 0000,A73,Sleep level
SMS reply: IMEI,A73,OK
Description:
When the sleep level is 0, the sleep mode is disabled (default).
When the sleep level is 1, the tracker enters the normal sleep mode. The GSM module always works, and the GPS module
occasionally enters the sleep mode. The tracker works 25% longer in the normal sleep mode than that in the normal working
mode. This mode is not recommended for short interval tracking; this will affect the route precision.
When the sleep level is 2, the tracker enters the deep sleep mode. If no event (SOS, button changes, incoming calls, SMSs, or
vibration) is triggered after five minutes, the GPS module will stop working, and the GSM module will enter sleep mode. Once
an event is triggered, the GPS and GSM modules will be woken up.
Note: In any condition, you can use an SMS command to disable the sleep mode, and then the tracker exits the sleep mode and
returns back to the normal working mode.

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 18 -
Example:
Sending: 0000,A73,2
Reply: 353358017784062,A73,OK
3.8.3 Setting GPS Data Filtering –D71
SMS sending: 0000,D71,X,Y1,Y2,Y3,Y4
SMS reply: IMEI,D71,OK
Description:
X: Whether to enable the GPS data filtering function. 1: Enable the function. 0: Disable the function (default).
Y1: indicates the minimum value of the driving speed. Value range: 0–999 km/h. When the driving speed is greater than Y1,
GPS data will be updated.
Y2: indicates the maximum value of the driving speed. Value range: 0–999 km/h. When the driving speed is less than Y2, GPS
data will be updated.
Y3: indicates the number of satellites. Value range: 0–99. When the number of satellites is greater than Y3, GPS data will be
updated.
Y4: indicates the positioning accuracy. Unit: x10. Value range: 0–999. When the positioning accuracy value is less than Y4, GPS
data will be updated.
When the GPS data filtering function is enabled, if all conditions of Y1, Y2, Y3 and Y4 are met, GPS data will be updated.
The GPS data filtering function can eliminate static drift, but it will affect the route precision.
Example:
Sending: 0000,D71,1,5,225,8,9
Reply: 353358017784062,D71,OK
3.8.4 Setting Output Triggering –D72
SMS sending: 0000,D72,X,Y1,Y2,Y3,Y4
SMS reply: IMEI,D72,OK
Description:
X: Select an output port. 1: OUT1. 2: OUT2.
Y1: indicates the output time when an event is triggered. Unit: 10 ms. Value range: 0–4294967295.
Y2: Value: 0, 1, and 2.
⚫0: Output high level.
⚫1: Output low level (default).
⚫2: Output PWM wave.
Y3: indicates the PWM duty cycle. Value range: 0–100.
Y4: indicates the PWM period. Unit: μs. Value range: 2000–50000000.
Configure output triggering according to your requirements. The low level is output by default. The PWM duty cycle and period
are available for PWM wave output only.
Example:
Sending: 0000,D72,1,0,0
Reply: 353358017784062,D72,OK
3.8.5 Allocating GPRS Cache and GPS Log Storage Space –D73
SMS sending: 0000,D73,X,Y

MEITRACK T622 Series User Guide
Copyright © 2021 Meitrack Group All rights reserved. - 19 -
SMS reply: IMEI,D73,OK
Description:
X: Set the storage percentage of GPRS cache. Decimal in percentage.
Y: Set the storage percentage of GPS logs. Decimal in percentage.
The sum of X and Y must be 100.
If data is stored in internal memory which has 8 MB capacity, GPRS cache and GPS logs occupy 50% of the total capacity
respectively by default (that is, 8,190 GPRS cache records and 65,536 GPS logs).
At most 16,384 GPRS cache records and 131,072 GPS logs are allowed.
Example:
Sending: 0000,D73,70,30
Reply: 353358017784062,D73,OK
For details about SMS commands, see the MEITRACK SMS Protocol.
Note:
1. The default SMS command password is 0000. You can change the password by using Meitrack Manager and SMS
command.
2. The device can be configured by SMS commands with a correct password. After an authorized phone number is set, only
the authorized phone number can receive the preset SMS event report.
4Logging In to MS03 Tracking System
Visit http://ms03.trackingmate.com, enter the user name and password, and log in to the MS03. (Purchase the login account
from your provider.)
For more information about how to add a tracker, see the MEITRACK GPS Tracking System MS03 User Guide (chapter 4 "Getting
Started").
The MS03 supports the following functions:
⚫Track by time interval or distance.
⚫Query historical trips.
⚫Set polygonal geo-fences.
⚫Bind driver and vehicle information.
⚫View various reports.
⚫Send commands in batches.
⚫Support OTA updates.
For details, see the MEITRACK GPS Tracking System MS03 User Guide.
If you have any questions, do not hesitate to email us at [email protected].