Mekluc ISEE-U User manual

1
USER MANUAL
ISEE-U
Kids smart watch

2
Operang Instrucons
Please make sure you have a complete set which should include:
I. The Watch
II. The Charger
III. Mini-screwdriver
Please read the instrucon manual before use in order to correctly set up ISEE-U
and install the SeTracker (The App).
I
II
III

3
A. W A T C H P R E S E N T A T I O N A N D P A R T S
B. ON SCREEN DISPLAY AND DESCRIPTION OF ICONS
GSM | GPS |Baery
Rewards /Hearts |Voice message
Time
Date
Step counter

4
C. SETTING UP : DOWNLOAD AND INSTALLATION
Download and install SeTracker to the main device. SeTracker
is the mobile applicaon used to control ISEE-U.
There are 3 ways of geng SeTracker App:
1. By scanning the QR Code on in the User Manual

5
2. By downloading SeTracker from Google play store or iStore.

6
3. By downloading from our website.
www.mekluctech.co.za

7
D. REGISTER YOUR ISEE-U
Aer installing SeTracker on your mobile phone, please create a username
and password to login into the applicaon:
1. License – Type the ID shown on the back of the watch.
2. Account: Create a name for your watch e.g. Carla
3. Nickname: Create a nickname for your watch,
we recommend it be the same as the account name.
ID:12345678899900000
1
2
3
4
5
6
78

8
4. P_Number: Insert the number of the main device that will control ISEE-U
5. Password : Create a password for your SeTracker App
6. R_password: Confirm your password.
7. Language: Choose your preferred language.
8. Area: Choose your area, in this case select “Europe and Africa” and press “OK”
You are now registered
Europe and Africa

9
E. START ISEE-U
Aer registraon with SeTracker, get a SIM card and RICA it.
1. Top up the SIM card with airme (minimum of R10).
Even a contract SIM card can be used. Please make sure that is acvated.
2. Use the provided screwdriver to unscrew the strap on the SIM card slot
and enter the SIM card with the chip facing up and edged corner
facing into the watch. [please make sure the power is off when performing this task]
3. Replace the strap back onto the SIM card slot and secure it firmly
using the screw driver.
Chip facing up

10
4. Press the Power Buon to switch on the watch. The network signal,
GPS or Wi Fi should show; if not wait for about 5-15 minutes for signal acvaon.

11
F. LOGIN AND SETTINGS
Go back to your SeTracker on your mobile phone Login into your SeTracker
(using your created username and password) and Press “SETTINGS”
and set all your preferences.

12
1. SOS/Family Number/s
Set up to three emergency numbers that will be dialed when the child presses
the SOS Panic Buon.
1.1 Save the three numbers preferably in order of importance in the SeTracker App.
1.2 In the event that the first number is not answered, the second and third
numbers are automacally dialed in their order by the ISEE-U.
This sequence is repeated unl a response is obtained from one of
the phones failing which, the Smart Watch automacally sends a reminder SMS
text to the first SOS/Family Number.
1.3 SOS Panic Buon is used in case of an emergency; the child should
press-hold the SOS buon for 3 seconds to send an alert to the phone.
2. Monitoring: Enter the mobile number of the device that will be used to
monitor ISEE-U Smart Watch. The monitoring is done through voice commands.
3. Work Mode Opons: Set the frequency you wish to receive
locaon updates from ISEE-U.
3.1 Normal Mode……………… 10 minutes
3.2 Power Save Mode…………1 hour
3.3 Follow mode…………………1 minute

13
4. Do Not Disturb Sessions: Set me frames to block incoming calls and messages
to the watch. Up to three “Do Not Disturb Sessions” may be saved through
the app to avoid interrupng the child's roune e.g. school,
from 08:00hrs to 14:00hrs, Monday to Friday or bed me, 20:00hrs to 06:00hrs
5. SMS Alerts Sengs:
Guardian Number: Insert the mobile number of the parent/guardian
who will receive SMS alerts for:
5.1 Low Baery Noficaons
5.2 SOS Reminder
5.3 Watch Removal
1
2
3
4
5
6

14
6. Contacts: Save up to 10 mobile numbers that the child can communicate with.
Only the saved numbers will be able to communicate with the ISEE-U.
6.2 To add a contact, tab the appropriate fields and enter the mobile number.
Press “Save” and the contact will be added.
6.3 To remove a contact number tab on it, click “Delete”.
Press “Save” when you are done.

15
7. Telephone: This is the child's lile phonebook, this me with names
and numbers that will reflect on the child's ISEE-U.
To add or remove numbers repeat the same method used for step 6 above.
8. Language and Time Zone: Set up your language preferences and your me zone.
If you are in South Africa for instance, select +2 GMT then click “Ok”.
9. Push Switch: This opon enables instant alerts to the monitoring device when
ISEE-U has been removed by/from the child.
Press the circle to the le to turn OFF or right to turn ON.
Green means it is on and white means it is off.
10. LBS: Opon to enable or disable LBS funcon .Press the buon on the extreme
le to switch it ON or OFF. Green means it is on and white means it is off.
11. Remote Shutdown: Opon to remotely shutdown ISEE-U via SeTracker App.
If you wish to remotely shutdown the watch,
press “Remote Shutdown” then press “OK” and the watch will power off.

16
12. Restore The Default Work Mode: This is the factory default work mode
that keeps the GPS working and updates the locaon every 10 minutes
throughout the day.
Press OK to restore and press “Cancel” if you don't wish to restore it.
G. THE “MY” INTERFACE : Account Details and Sengs
1 Personal data
1.1 Account: The ID on the back of the watch
1.2 Sex: Indicate whether you are male or female.
1.3 Name: Insert your name
1.4 Phone: Insert the phone number linked to the child's watch
1.5 Email: Enter your email address.

17
2 Device List:
Manage the watches you control with your SetTracker.
2.1 To add a watch press the Add device buon
2.2 To edit the nickname press Edit nickname
2.3 To remove a device press the Delete device buon
3 Changing your Password
3.1 Enter your current password and press OK.
3.2 Enter your new password and press OK.
3.3 Re-enter your new password and press OK.

18
H. THE FUNCTIONS
1 CHAT / Two-way Communicaon
This is a two-way voice communicaon between ISEE-U Smart Watch
and SeTracker App akin to how a walkie-talkie works.
1.1 How to send voice message via SeTracker?
Go to CHAT then “Start Record” and when done press “Stop Record”
and message will go through. The child should press the SOS Buon to
play the voice message on the watch.
1.2 How to send a voice message via ISEE-U Smart Watch
While talking, connually hold down the Talk Buon to start recording,
release the buon to send and SeTracker will receive the voice message.
While in the CHAT interface, press the balloon to listen to the
message on SeTracker App.

19
2 MAP
ISEE-U Smart Watch uses a GPRS connecon on real me for posioning,
tracking and monitoring.
The ISEE-U Smart Watch is equipped with a tripple posioning system consisng of :
2.1 GPS Tracker
GPS in the ISEE-U Smart Watch uses satellites to accurately pinpoint the
geographiical posion of the child and track the movement.
A signal from at least 3 satellites are needed to calculate a 2-D posion .
With four or more satellites , ISEE-U can determine a 3D posiion
(latude, longitude and altude) posion of the child. When GPS is in use,
the tracking will be shown in on SeTracker App map. “red”

20
2.2 LBS Posioning
Taking into account the posion of cellphone towers available in an area where
the watch is, it will use a triangulaon technique to work out a geographical
posion down to street level. The posion will not be as accurate as that of a GPS.
When LBS is on, the posioning will be shown in on the SeTraccker map.“blue”
2.3 Wi-fi Posioning
If the ISEE-U Smart Watch moves indoors and the GPS signal gets blocked or weak
ISEE-U will automacally pick up the signal of an indoor Wi-Fi access point if
any is available and use it to establish a locaon.
When WI-FI posioning is acve , it is shown in on the SeTracker App map. “green”