MelodySusie 2035 User manual
User Manual
2 IN 1 Nail Lamp
with Nail Drill
.......................................
..................................................
..................................................
....................................
.......................
.............................................
..........................
01
03
04
05
05
09
09
INDEX
Important Safeguards
Six Drill Bits
How to Use
How to Replace Drill Bit
Problem and Terms of Settlement
Specifications
Warranty and Customer Service
Thank you for choosing Melodysusie! Please read this user
guide carefully and keep it in an accessible location as you
may refer to it later.
01
03
04
05
05
09
09
01
Check the power supply cord before the first use and during
the life of the device. Do not use this device if it has a
damaged cord or plug or it is not working properly or
damaged.
Do not plug this device into a voltage system that is different
from the voltage system specified on the device or charger.
Use with improper voltage will damage the device and VOID
warranty.
Please use the original charger only.
The handpiece of this device is not compatible with other
models of nail drill machines from MelodySusie and other
brands. Please don't connect the handpiece with other nail
drill machines
To reduce the risk of burns, electrocution, fire, or injury
to persons.
Please be sure to read the safety instruction as follow to avoid
potential hazards that could result in personal injuries or damage
to the device.
2.
3.
4.
1.
READ ALL INSTRUCTIONS BEFORE USING.
Check before Using
Make sure your outlet supplies the correct power voltage to
avoid damage to the lamp.
1.
Note for Using
IMPORTANT SAFEGUARDS
02
Please do not unplug the power cord when the machine is
working to avoid potential damage to the lamp.
Do not place heavy objects on the lamp housing.
Do not disassemble the device. Doing so could be dangerous and
constitutes voiding warranty conditions.
Do not draw out the connecting wires during use or touch the
plug with the wet hand to prevent electric leakage and shock or
fire. Please turn the power off after use.
Do not use the crooked or damaged nail drill bit or replace the bit
when the power is on.
Adjust the speed gradually, not abruptly. Please stop to use once
the unusual movement and noise happens from the handpiece.
Do not cover the ventilation of the handpiece avoiding burning
your hand or touch any rotating part while the device is working.
Misuse, dropping or excessive force may cause device damage.
Please turn off the device and unplug the power cord before
cleaning. Use a cloth with neutral detergent to clean the surface
of the machine.
Children under 18 years of age should not use this device without
parental consent and supervision.
If the device or the power cord is damaged, it should be repaired
or replaced by MelodySusie or another authorized professional.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Store the device in a cool and dry place. Do not store it in a
hot or humid environment.
Keep the electrical cord away from heated surfaces.
Do not dispose of the device in heat or fire.
Do not clean the device with harmful chemicals or detergents.
3.
4.
5.
6.
Do not disassemble the device. Doing so could be dangerous
and constitutes voiding warranty conditions.
Do not keep the device in a place which is about or more than
50℃(in a metal box, car, or other places at high temperature).
Keep the handpiece dry and keep it away from the oil and
grease.
1.
2.
Maintenance Work
03
Having manicures done frequently can cause injuries to the nails as well.
If you need to remove the gel polish of natural nails, try to use the nail
polish remover pads to avoid damage to the nail bed with improper
operation.
Do not use the device if you have an open wound on your nail or hand.
If you have any skin diseases, heat-sensitive, allergic reactions, onychomycosis,
or any other disorder, you should consult your doctor and medical
professional before using the device.
2.
3.
4.
1.
Note for Injury
The operator shall be responsible for any consequences including product
damage or accidents if not strictly complies with the instructions.
If you require any technical support, contact us at
SAVE THESE INSTRUCTIONS
Cone Safety bit Needle head
Small barrel Large barrel Mandrel +
sanding bands
Surface work Surface work and
shortening
Surface work, shortening,
and removal
Under nails, cuticles,
and sidewalls
Cuticle work, polish
nail side edge
Polish nail edge
04
Step 1:
Step 3:
Step 2:
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
Connect the handpiece to the handpiece jack.
Connect the power adapter with the DC socket.
Choose the required time (15s/ 30s/60s/90s) to start
working, the default time is 15s.
Choose a drill bit, release the handpiece, insert the drill
bit into the handpiece, and lock it in place.
Press the ON/OFF button to turn on the device
Rotate the speed control knob to accelerate or decelerate
the rotation speed.
Change the rotation direction of the grinding drill bit on
the F/R button if needed.
Press the ON/OFF button to turn off the device, unplug
the power adapter when you do not use it for a long time.
Please turn off the power when you do not use the device.
There has a protective film on the touch screen, please take
it off to get a smooth and bright panel.
How to Use
1.
2.
NOTE:
Handpiece speed
control knob
Digital time display
Time & F/R touch
button
Handpiece holder
hole
ON/OFF
Handpiece jack
DC socket
Intelligent infrared
sensor
Detachable
base
Please make sure that the desired bits is suitable for the collet.
How to Replace Drill Bit
05
Turn the central barrel clockwise until hearing a "click" sound
to release the drill bit. Put the desired bit into the handpiece.
Turn the central barrel counterclockwise until hearing a "click"
sound to lock the drill bit in place.
Be sure to confirm the rotation of the bit and collet. Please
take care of your fingers not to be hurt by bit edge.
1.
2.
3.
*Do not move the central barrel during operation.
*Do not cover the ventilation holes on the handpiece, when
using the device.
Problem and Terms of Settlement
Terms of settlementReasons
Part 1：Nail Lamp
Malfunctions
06
Terms of settlementReasonsMalfunctions
According to the device
voltage requirements,
insert the matching
power supply
Do not pull the power
cord
The continuous working
time should not be too
long when the working
condition is in heavy
load. When the device is
overheating, it should be
stopped immediately to
make it return to normal
temperature.
1. Motor burns out
2. Device lifespan
shortens
3. Bearing damages
(Loud Noise)
4. Handpiece damages
1. Motor burns out
1. Device lifespan shortens
2. Power cord brokes
3. Poor connection
4. Easy to cause short circuit
Long time, Large load
work
Insert into a mismatched
power supply
Put the power cord at
random/ Pull the power
cord
Changing the nail drill bit
when the power is on
Turn off the power when
changing the nail drill bit
Turn off the power when
not in use
1. Motor burns out
2. Bearing damages
(Loud Noise)
The power is on when not
in use
Terms of settlementReasonsMalfunctions
07
Part 2：Nail Drill
Terms of settlementCausingMalfunctions
Use the original
specification charger
Clean dust, add the
dust-proof protection
of the dustproof hood
Insert the nail drill bit
into the device
correctly/If the drill bit
stucks, please release
the handpiece and try to
take out it hard/Rotate
the central barrel
correctly
Do not operate in wet or
moist conditions/Only a
dry cloth is allowed for
cleaning
Use standard drill bit
1. Device damages
2. Easy to cause short circuit
1. Bearing damages (Loud
Noise)
2. Handpiece damages
1. Drill bit falls out
2. High vibration
3. Drill bit stucks
4. The handpiece stucks
and cannot be turned on
5.Handpiece damages
1. Motor burns out
2. Device lifespan shortens
1. Can not insert the drill
bit into the device
Replace the original
charger randomly
Dust into the handpiece
Insert the nail drill bit into
the handpiece incorrectly
/Rotate the central barrel
into the place incorrectly
/Take the drill bit out when
the central barrel is locked
Avoid device drops or
by other impacts ( If the
handpiece was
damaged, it can be
purchased separately. )
1. Device damages
2. Handpiece damages
Device drops to the ground
or by other impacts
The size of drill bit is not
suitable
Cover the ventilation holes
on the handpiece, when
using the device
Replace drill bit when
handpiece is not
completely stopped
1.The handpiece stucks
and cannot be turned on
2. Handpiece damages
Do not replace drill bit
when handpiece is not
completely stopped
1. Handpiece overheats
2. Hand burns
Do not cover the
ventilation holes on the
handpiece, when using
the device
Water into the
device/Operate in wet or
moist conditions/Use a
wet cloth to clean the
device
08
Terms of settlementCausingMalfunctions
Warranty and Customer Service
Specifications
Input voltage range: AC 100-240V/50-60Hz
Output Voltage: DC 24V/2A
Email: [email protected]
Website: http://www.melodysusie.com
09
MelodySusie offers a 6-month limited warranty on quality-
related issues. Please apply for your extra 6-month warranty
extension and download the user manual in other languages
by registering on www.melodysusie.com if needed.
Received the
product
Satisfied
Unsatisfied
Share your experience
Contact MelodySusie
customer service.
Apply for extra 6-month
warranty extension on
www.melodysusie.com if
needed.
Table of contents
Other MelodySusie Personal Care Product manuals
