Memjet AFINIA LABEL L701 Series Specification sheet

Quick Setup
and
Installation
Guide
For more detailed information, insert the
Installation Disc into the PC and click the User
Guide button on the Setup Launcher main
page.
(continued on next page)
Unpack:
1Remove tape and packing materials
Remove tapes.
a

bOpen top cover and remove tapes and foam.
foam
Remove cardboard.
Squeeze latches to open clamshell
Lift tabs
Pull tabs to remove cardboard
cSave the packing foam and cardboard!

2Connect power, turn on switch in back
Choose display language
a b
Missing Printhead LANGUAGE
1. English
(Config)
(Select)
For other languages,
press ,
c
(Return)
LANGUAGE
1. English
If Language is
Do not connect the printer to a PC until prompted
to do so during the Printer Driver Installation!
not displayed,
press Select
If Language option is not available, see Selecting the Security Level
in Chapter One of the User’s Manual.
Alert:
It is recommended to keep the printer powered on
overnight and weekends to allow idle
maintenance

3Install ink cartridges
a
b
c

4Install
Missing Printhead
CONFIGURATION
3. PRINTHEAD
PRINTHEAD
2. REPLACE
Wait for printhead latch to be released.
(Select)
(Config)
Remove caps.
a
b
cOpen printhead latch fully.
d
d
c
printhead
g
h
i
Check that ink is flowing through the tubes
on both sides of the printhead.
Do not discard caps!
eRemove cover from printhead
Do not discard the cover!
Slowly remove tape from electrical contacts
nozzles
No less than 45°
fand nozzles
electrical contacts
Control Panel
will read
Online when
ready

c
5Load sample media
b
a
d
Tighten knob fully.
e
Flat side against media roll.
f
Wait for printer to load media
g
h
Insert media until it stops
Unwinder Media path

Print test label
6
Printer Online
(Config)
Sample PQ Plot
CONFIGURATION
2. MAINTENANCE
MAINTENANCE
1. PRINT TEST PAGE
PRINT TEST PAGE
2. PQ PLOT
(Select)
Top Section:
• Lines are defined with no missing nozzles
• Lines are printed in order: Yellow, Black, Cyan, Black,
Magenta
• Vertical dashed lines are straight
Middle Section:
• All yellow, black, cyan, black, magenta lines are printed
• No color mixing on the color bars
• Numbers 1, 3, 5 are visible
Bottom Section:
• Lines are defined with no missing nozzles
• Lines are printed in order: Yellow, Black, Cyan, Black,
Magenta
Overall:
• No streaking or smearing
Requires inter-label gap or continuous media

To connect printer to network
c
d
e
a
Printer Network
Network
Connect printer to network using Ethernet
bIf you will be using DHCP to set the IP
Address, skip to step c.
To assign the printer a Static IP address,
please see Selecting the Security Level in
Chapter One of the User Manual before
proceeding to step c.
Install printer driver
7Before installing printer driver, ensure the computer meets minimum system
requirements (see System Requirements in the User Manual Appendix).
To connect printer to computer using USB
b
a
c
Printer Computer
d
USB
Connect USB cable when prompted.
If a newer firmware is available, you will be asked to update the printer; answer Yes.
DO NOT POWER THE PRINTER DOWN DURING THE UPDATE!!!
Download Latest Driver
https://afinialabel.com/product-support/
l701-support/
Download Latest Driver
https://afinialabel.com/product-support/
l701-support/