Memorex Digital Video Disc Player User manual

Contents..................................................................1
Important Safety Instructions ...............................2
Features ..................................................................5
Precautions.............................................................6
Power Source .........................................................6
Location of Controls ..............................................7
• Front....................................................................7
• Rear ....................................................................7
• Remote ...............................................................8
Remote Control ......................................................9
• Battery Installation ..............................................9
• Effective istance of the Remote
Control Transmitter .............................................9
Connection............................................................10
• Connecting the Player to a TV Using the
Audio/Video Output Jacks ................................10
• Connecting the Player to a TV using the
S-Video Output Jack.........................................10
• Connecting the Player to a TV Using the
Y/PB/PRJacks...................................................11
• Progressive (Y, PB, PR) Video Output...............11
• 525 Line igital Progressive-scan Component
Video Output .....................................................11
• Connecting the Player to a TV using the
H MI Output Jack ............................................12
• Connecting the Player to a TV using a
VI Cable..........................................................13
• Connecting the Player to a Home Theater
System (via Coaxial/Optical Jack) ....................14
• Connecting the Player to a Home Theater
System (via 7.1 Channel Output Jacks) ...........15
About Discs ..........................................................16
Setup enu...........................................................18
• General Setup Menu.........................................18
• Video Setup Menu ............................................20
• Audio Setup Menu ............................................21
• Language Setup Menu .....................................23
• Setting the Parental Control Options ................24
Basic Operation (General)...................................26
• Volume Buttons.................................................26
• Color Buttons ....................................................26
• Mute ..................................................................26
BD/DVD Operation................................................27
•Playback of a Blu-ray isc or a V ................27
• Skip ...................................................................28
• Search...............................................................28
• Pause and Step ................................................28
• Slow ..................................................................28
• Top Menu Button...............................................29
• Pop-Up Menu....................................................29
• Home Button.....................................................29
• Time Search......................................................29
• Repeat Playback...............................................30
• isplay-Title/Chapter Search ............................30
• PIP (Picture in Picture) .....................................30
• 2nd Audio..........................................................30
• Zoom.................................................................31
• Angle.................................................................31
• Subtitle ..............................................................31
• Audio.................................................................31
P3/W A Operation ............................................32
• Playback of an MP3/WMA isc ........................32
• Selecting Folders/Tracks Using the SKIP
Buttons..............................................................34
• Repeat Play ......................................................34
• MP3 FAQs.........................................................34
CD Operation ........................................................35
• Playback of a C ..............................................35
• Selecting Tracks/Files Using the
Number Buttons................................................36
• Selecting Tracks/Files Using the SKIP
Buttons..............................................................36
• Fast Forward/Rewind Search ...........................36
• Repeat/Random................................................36
Data CD/USB Operation.......................................37
• Playback of a ata C /USB.............................37
Troubleshooting Guide........................................39
Care and aintenance .........................................41
Specifications .......................................................42
Language List Codes...........................................43
1
CONTENTS

2
I PORTANT SAFETY INSTRUCTIONS
WARNING: SHOCK HAZAR - O NOT OPEN
AVIS: RISQUE E CHOC ÉLECTRIQUE - NE PAS OUVRIR
This Caution Marking is located at the rear enclosure of the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
THIS IGITAL VI EO ISC PLAYER EMPLOYS A
LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRO UCT,
PLEASE REA THIS OWNER’S MANUAL CAREFULLY
AN RETAIN FOR FUTURE REFERENCE. SHOUL
THE UNIT REQUIRE MAINTENANCE, CONTACT AN
AUTHORIZE SERVICE LOCATION-SEE SERVICE
PROCE URE.
USE OF CONTROLS, A JUSTMENTS OR THE
PERFORMANCE OF PROCE URES OTHER THAN
THOSE SPECIFIE HEREIN MAY RESULT IN
HAZAR OUS RA IATION EXPOSURE.
TO PREVENT IRECT EXPOSURE TO LASER BEAM,
O NOT TRY TO OPEN THE ENCLOSURE. VISIBLE
LASER RA IATION MAY BE PRESENT WHEN THE
ENCLOSURE IS OPENE . O NOT STARE INTO BEAM.
WARNING:
TO RE UCE THE RISK OF FIRE OR ELECTRIC
SHOCK, O NOT EXPOSE THIS PRO UCT TO RAIN
OR MOISTURE.
WARNING:
TO RE UCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AN ANNOYING INTERFERENCE, USE THE
RECOMMEN E ACCESSORIES ONLY.
SURGE PROTECTORS:
It is recommended to use a surge protector for AC
connection. Lightning and power surges ARE NOT
covered under warranty for this product.
The symbol for class II
( ouble Insulation)
LASER WARNING:
This unit employs a laser. Only qualified service
personnel should attempt to service this device due to
possible eye injury.
FCC NOTICE:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
FCC CAUTION:
To assure continued compliance, follow the attached installation
instructions and use only shielded cables when connecting to other
devices. Also, any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
N B-003 du Canada.
Manufactured under license from olby Laboratories.
olby and the double- symbol are registered trademarks of
olby Laboratories.
Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;
6,487,535 & other U.S. and worldwide patents issued &
pending. TS is a registered trademark and the TS logos,
Symbol, TS-H , TS-H High Resolution Audio and TS-
H High Res Audio are trademarks of TS, Inc. © 1996-2008
TS, Inc. All Rights Reserved.
ATTENTION:
POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRO UIRE LA
LAME LA PLUS LARGE E LA FICHE ANS LA BORNE
CORRESPON ANTE E LA PRISES ET POUSSER JUSQU’AU
FON .

3
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general
precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to
an outdoor antenna.
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this product from the wall outlet before cleaning. o not use liquid cleaners or aerosol cleaners. Use a dry cloth
for cleaning.
6. ATTACH ENTS
o not use attachments not recommended by the product's manufacturer as they may cause hazards.
7. WATER AND OISTURE
o not use this product near water–for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet
basement; or near a swimming pool.
8. ACCESSORIES
o not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious injury
and serious damage to the product. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer
or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.
8A. An appliance and cart combination should be moved with care. Quick stops, excessive force and
uneven surfaces may cause the appliance and cart combination to overturn.
9. VENTILATION
Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure
reliable operation of the product and to protect it from overheating. These openings must not be blocked
or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other
similar surface. This product should never be placed near or over a radiator or heat source. This product
should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
10. POWER SOURCES
This product should be operated only from the type of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your appliance dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
o not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from
the appliance.
13. LIGHTNING
To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning
and power-line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15. OVERLOADING
o not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
I PORTANT SAFETY INSTRUCTIONS (CONTINUED)

16. OBJECT AND LIQUID ENTRY
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Section 810 of the National Electric Code, ANSI/NFPA 70,
provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge product, size of grounding conductors, location of antenna discharge product, connection to
grounding electrodes and requirements for grounding electrodes.
18. SERVICING
o not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
19. REPLACE ENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by the
manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.
21. WALL OR CEILING OUNTING
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. DA AGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions, as an adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance-this indicates a need for service.
23. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves or other products
(including amplifiers) that produce heat.
24. NOTE TO CATV SYSTE INSTALLER
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
4
EXAMPLE OF ANTENNA GROUN ING AS PER
NATIONAL ELECTRICAL CO E
I PORTANT SAFETY INSTRUCTIONS (CONTINUED)

This unit has many features, some are outlined below. Please read the owner’s manual to take full advantage of
all the features this unit has to offer.
•BD-RO Playback
B -ROM is a next generation optical disc format in the H era. Featuring massive storage capacity of 25 to
50 GB (five times larger than a V ) and a high-speed transfer rate of up to 54 Mbps, this format offers not
only uncompromised H quality video*†, but also enables rich bonus content on a single disc and H quality
audio up to 8ch, and interactive operability.
* A compatible H display device is necessary to enjoy the same quality.
†Some discs allow viewing only with an H MI connection.
•24p True Cinema
Movies shot with a film camera consist of 24 frames per second. Since conventional televisions (both CRT
and flat panels) display frames either at 1/60 or 1/50 second intervals, the 24 frames do not appear at an
even pace.
When connected to a TV with 24p capabilities, the player displays each frame at 1/24 second intervals —
the same interval originally shot with the film camera, thus faithfully reproducing the original cinema image.
•BD-J application
The B -ROM format supports Java for interactive functions. “B -J” offers content providers almost unlimited
functionality when creating interactive B -ROM titles. Java and all Java-based trademarks and logos are
trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.
•Support of uncompressed multi-channel Linear PC
In combination with a compatible AV amplifier, the player can output up to 8ch Linear PCM surround sound.*
With a non-compatible amplifier, the player can output 5.1ch analog signals from its 5.1CH OUTPUT jack for
high quality audio enjoyment.
* Note that the IGITAL OUTPUT (COAXIAL or OPTICAL) jack does not output 8ch signals. You will need
an H MI cable and an H MI compatible device that support 8ch signals.
•Support of “Dolby TrueHD” and “DTS-HD” - 7.1 Channel Surround Sound
The player supports the bitstream output functionality of olby TrueH , olby igital Plus, and TS-H
High Resolution Audio bitstream via H MI. It also supports the decoding functionality of olby TrueH ,
olby igital Plus, and TS-H High Resolution Audio to multi-channel Linear PCM via H MI.
•HD I (High-Definition ultimedia Interface) digital interface
When connected to an H MI-equipped display device using a single H MI cord, the player can output both
S to H video and multi-channel audio signals, in digital form without degradation. The H MI specification
supports H CP (High-bandwidth igital Content Protection), a copy protection technology that incorporates
coding technology for digital video signals.
•Library function for recorded files (For JPEG image, P3 audio, AVI, W V files only)
With ATA- V s and ATA-C s, three separate Audio/Video/Picture/All Title List-browsers allow for easy
sorting, searching and playback.
5
FEATURES

6
PRECAUTIONS
POWER SOURCE
Insert the AC plug (with the 2 blades) into a conveniently located AC outlet having 120V,
60Hz.
NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility of
electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or cut
the wide blade. It is the user’s responsibility to have an electrician replace the obsolete
outlet.
AC Plug
AC Outlet
NOTES ON HANDLING:
• When shipping the player, always use the original
shipping carton and packing materials. For maximum
protection, repack the unit as it was originally packed
at the factory.
• o not use volatile liquids, such as insect spray, near
the player. o not leave rubber or plastic products in
contact with the player for a long time. They will leave
marks on the finish.
• The top and rear panels of the player may become
warm after a long period of use. This is normal and
not a malfunction.
• When the player is not in use, be sure to remove the
disc and turn off the power.
• If you do not use the player for a long period, the unit
may not function properly in the future. Turn on and
use the player occasionally.
NOTES ON LOCATING THE PLAYER:
• When you place this player near a TV, radio or VCR,
the playback picture may become poor and the sound
may be distorted. In this case, move the player away
from the TV, radio or VCR.
NOTES ON CLEANING:
Use a soft, dry cloth for cleaning.
• For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe
it dry. o not use any type of solvent, such as thinner
or benzene, as it may damage the surface of the
player.
• If you use a chemical-saturated cloth to clean the unit,
follow that product’s instructions.
Warning: Cleaning and adjustment of lenses and/or
other components of playback mechanism should be
performed by a qualified service technician.
NOTES ON OISTURE CONDENSATION:
oisture condensation damages the player. Please
read the following carefully.
• Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. rops of
water form on the outside of the glass. In the same
way, moisture may condense on the optical pick-up
lens inside this unit, one of the most crucial internal
parts of the player.
oisture condensation occurs during the following
cases:
• When you bring the player directly from a cold place
to a warm place.
• When you use the player in a room where you just
turned on the heater, or a place where the cold wind
from the air conditioner directly hits the unit.
• In summer, when you use the player in a hot and
humid place just after you moved the unit from an air
conditioned room.
• When you use the player in a humid place.
Do not use the player when moisture condensation
may occur.
• If you use the player in such a situation, it may
damage discs and internal parts. Remove the disc,
connect the power cord of the player to the wall outlet,
turn on the player and leave it “ON” for two or three
hours. After two or three hours, the player will have
warmed up and evaporated any moisture. Keep the
player connected to the wall outlet and moisture
condensation will seldom occur.
TO OBTAIN A CLEAR PICTURE:
The player is a high technology, precision device. If the
optical pick-up lens and disc drive parts are dirty or worn
down, the picture quality becomes poor. To obtain a clear
picture, we recommend regular inspection and
maintenance (cleaning or parts replacement) every 1,000
hours of use depending on the operating environment.
For details, contact your nearest dealer.

1 3 5 64 7 8 92
1. Standby Indicator
2. POWER/STANDBY Button
3. Display
4. Disc Compartment
5. STOP XX Button
6. PLAY (®) Button
7. OPEN/CLOSE Button
8. USB Jack (on side of unit,
under compartment)
7
LOCATION OF CONTROLS
FRONT
N
I
23 456781
1. HD I Jack
2. Video Output (CVBS) Jack
3. S-Video Output Jack
4. Component Video (Y, PB, PR) Output Jacks
5. COAXIAL Output Jack
6. OPTICAL Output Jack
7. Stereo Audio Left/Right Output Jacks
8. 7.1 Channel Audio Output Jacks
9. AC Power Jack
POWER CORD PART NO.:
JJA0310-150NFIX-R0*
*Consumer Replaceable Part (See page 40
to order.)
REAR

8
LOCATION OF CONTROLS (CONTINUED)
1. POWER Button
2. REPEAT Button
3. ZOO Button
4. Number (0–9) Buttons
5. ANGLE Button
6. SUBTITLE Button
7. AUDIO Button
8. POP-UP ENU Button
9. Navigation (π,†,√,®) Buttons
10. ENTER Button
11. TOP ENU Button
12. SLOW Button
13. STOP Button
14. Skip/PREVIOUS (oo) Button
15. Skip/NEXT (nn) Button
16. SEARCH Button
17. UTE Button
18. Color Buttons
Red (A) Button
Green (B) Button
Yellow (C) Button
Blue (D) Button
19. PIP Button
20. 2ND AUDIO Button
21. OPEN/CLOSE Button
22. SETUP Button
23. CLEAR Button
24. HO E Button
25. RETURN Button
26. DISPLAY Button
27. PLAY Button
28. PAUSE/Step Button
29. SEARCH/FAST FORWARD ®®®® Button
30. SEARCH/REWIND √√√√ Button
31. VOLU E +/– Buttons
32. USB Button
RE OTE CONTROL PART NO. JAK0800- E -R0*
A/V RCA Cable - PART NO. JFX1001-150-R0*
BATTERY COVER PART NO. JAK0800-COV-R0*
*Consumer Replaceable Part (See page 40 to order.)
RE OTE
OPEN/CLOSE
REPEAT
AN GLE
AUDIO
ENTER
SLOW STOP PLAY PAUSE
PREV NEXT F.F REW
PIP
HO ME
BD PLAYER
USB
SEARCH
VOL
2ND
SUBTITLE
CLEAR
ZOOM
P
O
P
-
U
P
M
E
N
U
R
E
T
U
R
N
T
O
P
M
E
N
U
D
I
S
P
L
A
Y
AUDIO
ABCD
SETUP
MUTE
POWER
1
2
3
4
6
5
8
9
10
11
12
13
14
15
16
7
17
18
19
20
21
22
26
24
27
28
29
31
32
30
23
25

9
RE OTE CONTROL
BATTERY INSTALLATION
EFFECTIVE DISTANCE OF THE RE OTE CONTROL TRANS ITTER
30˚ 30˚
20 ft.
NOTES:
• When there is an obstacle
between the player and the
transmitter, the transmitter may
not operate.
• When direct sunlight, an
incandescent lamp, fluorescent
lamp or any other strong light
shines on the REMOTE
SENSOR of the Player, the
remote operation may be
unstable.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the Battery Compartment. A reversed
battery may cause damage to the device.
3. o not mix different types of batteries together (e.g. Alkaline, Rechargeable, and Carbon-zinc) or old batteries with fresh
ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible
battery leakage.
5. o not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery
manufacturer’s directions.)
+
+
–
–
1. Remove the Battery Compartment cover by pushing in on the tab and
lifting the cover off.
2. Install two (2) “AAA” batteries, paying attention to the polarity diagram
in the Battery Compartment.
3. Replace the Battery Compartment cover.

10
CONNECTION
NOTES:
• If your TV has an H MI input, connect the player with the H MI cable for best results, otherwise use the Component,
S-Video or Video OUT jack on the player.
• Set the TV’s TV/VI EO button or switch to the VI EO setting.
• When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any
connections.
• If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply
store, or purchase online.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
• The video source is always output in 480i resolution, regardless of the setup menu settings.
CONNECTING THE PLAYER TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS
CONNECTING THE PLAYER TO A TV USING THE S-VIDEO OUTPUT JACK

11
CONNECTION (CONTINUED)
CONNECTING THE PLAYER TO A TV USING THE Y/PB/PRJACKS
NOTES FOR CONNECTING TO A TV:
• If your TV has an H MI input, connect the player with the H MI cable for best results, otherwise use the Component,
S-Video or Video OUT jack on the player.
• TV must have Y, PB and PR input jacks.
• Set the TV’s TV/VI EO button or switch to the VI EO setting.
• When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any
connections.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
• If using a TV with a blue screen option, turn the option off, on the TV for best results.
• When using the component jacks as your source, setup the H resolution in the Video menu as described on page 20.
PROGRESSIVE (Y, PB, PR) VIDEO OUTPUT:
Use these jacks to connect to a TV with progressive video input jacks. Progressive scan is a video scanning system that
displays all lines in a frame in one pass, as opposed to the traditional system, interlaced scan. This connection provides
optimum quality. To ensure maximum picture quality, use three video-grade cables for connections. Note that it is essential
to match the color-coded connectors with a compatible TV.
525 LINE DIGITAL PROGRESSIVE-SCAN CO PONENT VIDEO OUTPUT
Compared to standard interlaced video, progressive scan effectively doubles the amount of video information fed to your TV
or monitor. The result is a stable, flicker-free image. (Check your TV/monitor for compatibility with this feature.)
For the very highest picture quality, try watching a movie on V -Video on a progressive-scan compatible TV.
NOTE:
• CONSUMERS SHOUL NOTE THAT NOT ALL HIGH EFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRO UCT AN MAY CAUSE ARTIFACTS TO BE ISPLAYE IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMEN E THAT THE USER SET THE VI EO SETTING
TO 1080i INTERLACE SETTINGS, SEE PAGE 20.

12
CONNECTION (CONTINUED)
CONNECTING THE PLAYER TO A TV USING THE HD I OUTPUT JACK
NOTES:
• If your TV has an H MI input, connect the player with the H MI cable for best results, otherwise use the Component,
S-Video or Video OUT jack on the player.
• Set the TV’s TV/VI EO button or switch to the VI EO setting.
• When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any
connections.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
•When using H MI as your source, setup the H resolution in the Video menu as described on page 20 and the igital Output
in the Audio menu as described on page 21.
• The player’s video output will automatically change to H MI when the H MI cable is connected and the power is on.

13
CONNECTION (CONTINUED)
CONNECTING THE PLAYER TO A TV USING A DVI CABLE
NOTES:
• Set the TV’s TV/VI EO button or switch to the VI EO setting.
• When connecting the Player, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the Player to the TV, make sure the power is off and both units are unplugged before making any
connections.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
•When using H MI as your source, setup the H resolution in the Video menu as described on page 20.
• The player’s video output will automatically change to H MI when the H MI cable is connected and the power is on.

14
CONNECTION (CONTINUED)
CONNECTING THE PLAYER TO A HO E THEATER SYSTE (VIA COAXIAL/OPTICAL JACK)
NOTES FOR CONNECTING TO A TV:
• If your TV has an H MI input, connect the player with the H MI cable for best results, otherwise use the Component,
S-Video or Video OUT jack on the player.
• Set the TV’s TV/VI EO button or switch to the VI EO setting.
• When connecting the Player, refer to the owner’s manuals for the TV and the audio system, as well as this manual.
• When connecting, make sure the power is off and all units are unplugged before making any connections.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
• If using a TV with a blue screen option, turn the option off, on the TV for best results.
• If you place the player near a tuner, the radio broadcast sound might be distorted. In this case, move the player away
from the tuner.
• When using this connection, a Blu-ray isc with an LPCM audio soundtrack will be heard over the five channels.
Cables not included
5.1-Channel Amplifier with built-in decoder

15
CONNECTION (CONTINUED)
CONNECTING THE PLAYER TO A HO E THEATER SYSTE (VIA 7.1 CHANNEL OUTPUT JACKS)
Back of the unit
Connect Audio
cables to
terminals
correspondingto
the speakers you
have connected.
Multi channel speakers
NOTES FOR CONNECTING TO A TV:
• If your TV has an H MI input, connect the player with the H MI cable for best results, otherwise use the Component,
S-Video or Video OUT jack on the player.
• Set the TV’s TV/VI EO button or switch to the VI EO setting.
• When connecting the Player, refer to the owner’s manuals for the TV and the audio system, as well as this manual.
• When connecting, make sure the power is off and all units are unplugged before making any connections.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
• If using a TV with a blue screen option, turn the option off, on the TV for best results.
• If you place the player near a tuner, the radio broadcast sound might be distorted. In this case, move the player away
from the tuner.
• For the Audio setting, please refer to pages 21-22.
Cables not included

16
ABOUT DISCS
PLAYABLE DISCS:
The following discs can be played back
on this player:
DISC TYPES:
DISCS
ata on most discs is divided into sections called “titles” and
then into subsections called “chapters”, each of which is
given a title or chapter number. Some features of this player
will not operate with some discs as they are preset. If a
function you selected does not run as desired, refer to the
manual accompanying the disc.
AUDIO CD
ata on an audio C is divided into sections called “tracks”,
each of which is given a track number.
KODAK PICTURE CD
ata on a Kodak picture C is usually not divided into
separate folders, and should appear in the root directory.
The region/B - V codes for this player are listed on the back of the player. See the following page
for information regarding region/B - V codes.
P3
When playing an MP3, the total number of files will appear in the display, and the TV screen will list the folders/tracks.
MP3 is the abbreviation of “MPEG1 Audio Layer 3”. MPEG Audio is a format that compresses the audio portion only.
I PORTANT NOTE:
ue to many variables, including recording condition, type of disc, writing software, etc., this unit does not guarantee
playback of all MP3 discs.

DVD-R/RW, DVD+R/RW
This disc can be played in this player once it has been finalized by the recording unit.
I PORTANT:
It is important that you read the manual that accompanies the disc, as there are features that are on
the player that cannot be used with certain discs. There are also extra features on the disc that are
different for each disc, so they are not explained in this owner’s manual.
Notes on Copyright:
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public and rent copyrighted
material without permission. Video discs are copy protected, and any recordings made from these
discs will be distorted. This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only, unless
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Region anagement Information:
This Player is designed and manufactured to respond to the Region Management Information that is
recorded on a disc. If the Region number described on the disc does not correspond to the Region
number of this player, this player cannot play that disc. You may not be able to play back some video
discs on this player if they were purchased from outside your geographic area or made for business
purposes.
17
ABOUT DISCS (CONTINUED)

18
Select the General menu as shown above. Select
Screensaver using the Navigation (®) button 1, then press
the Navigation (®) button 1 again; “ON” and “OFF’ will
appear. Select ON (the screen saver will come on when the
unit stops or the image is paused for approximately 10
minutes) or OFF (the screen saver will not come on) using
the Navigation (π,†) buttons 1, then press the ENTER
button 2.
OPEN/CLOSE
REPEAT
AN GLE
AUDIO
ENTER
SLOW STOP PLAY PAUSE
PREV NEXT F.F REW
PIP
HOME
BD PLAYER
USB
SEARCH
VOL
2ND
SUBTITLE
CLEAR
ZOOM
P
O
P
-
U
P
M
E
N
U
R
E
T
U
R
N
T
O
P
M
E
N
U
D
I
S
P
L
A
Y
AUDIO
ABCD
SETUP
MUTE
POWER
21
1
Use this option to reset all the settings to their original factory
settings.
Select the General menu as shown above. Select Reset
Settings using the Navigation (π,†) buttons 1, then press
the Navigation (®) button 1; “Are you sure?” will appear.
Press the ENTER button 2, then select YES using the
Navigation (√,®) buttons 1 and press the ENTER button 2
again to reset the settings.
OPEN/CLOSE
REPEAT
AN GLE
AUDIO
ENTER
SLOW STOP PLAY PAUSE
PREV NEXT F.F REW
PIP
HOME
BD PLAYER
USB
SEARCH
VOL
2ND
SUBTITLE
CLEAR
ZOOM
P
O
P
-
U
P
M
E
N
U
R
E
T
U
R
N
T
O
P
M
E
N
U
D
I
S
P
L
A
Y
AUDIO
ABCD
SETUP
MUTE
POWER
21
1
GENERAL SETUP ENU:
To enter the General Setup menu, press the SETUP button, select General using the Navigation (π,†) buttons and then
press the Navigation (®) button.
SCREENSAVER RESET SETTINGS
SETUP ENU
NOTES:
•Press the SETUP button to exit the Setup menus.
• Press the RETURN button to return to the previous setting.
Imation may offer upgrades to your player’s firmware in the
future. To upgrade, go to www.memorexelectronics.com
and download the latest firmware, then load on a C or
onto a USB device. Select the General menu as shown
above. Select Update Firmware using the Navigation (π,†)
buttons 1, then press the Navigation (®) button 1; “C
ROM” and “USB” will appear. Select one and press the
ENTER button 2, then select YES using the Navigation
(√,®) buttons 1 and press the ENTER button 2 again.
Insert the C or USB device and the updated firmware will
install.
OPEN/CLOSE
REPEAT
AN GLE
AUDIO
ENTER
SLOW STOP PLAY PAUSE
PREV NEXT F.F REW
PIP
HO ME
BD PLAYER
USB
SEARCH
VOL
2ND
SUBTITLE
CLEAR
ZOOM
P
O
P
-
U
P
M
E
N
U
R
E
T
U
R
N
T
O
P
M
E
N
U
D
I
S
P
L
A
Y
AUDIO
ABCD
SETUP
MUTE
POWER
21
1
Use this option to view the Software version.
Select the General menu as shown above. Select Software
Version using the Navigation (π,†) buttons 1, then press
the Navigation (®) button 1; “View” will appear. Press the
ENTER button 2to view the software version and firmware
version.
OPEN/CLOSE
REPEAT
AN GLE
AUDIO
ENTER
SLOW STOP PLAY PAUSE
PREV NEXT F.F REW
PIP
HO ME
BD PLAYER
USB
SEARCH
VOL
2ND
SUBTITLE
CLEAR
ZOOM
P
O
P
-
U
P
M
E
N
U
R
E
T
U
R
N
T
O
P
M
E
N
U
D
I
S
P
L
A
Y
AUDIO
ABCD
SETUP
MUTE
POWER
21
1
UPDATE FIR WARE SOFTWARE VERSION

19
SETUP ENU (CONTINUED)
Select the General menu as shown on the top of the
previous page. Select Local Storage using the Navigation
(π,†) buttons 1, then press the Navigation (®) button 1.
Select Clear ata using the Navigation (π,†) buttons 1,
then press the ENTER button 2; “ o you want to clear ata?”
will appear.
OPEN/CLOSE
REPEAT
AN GLE
AUDIO
ENTER
SLOW STOP PLAY PAUSE
PREV NEXT F.F REW
PIP
HO ME
BD PLAYER
USB
SEARCH
VOL
2ND
SUBTITLE
CLEAR
ZOOM
P
O
P
-
U
P
M
E
N
U
R
E
T
U
R
N
T
O
P
M
E
N
U
D
I
S
P
L
A
Y
AUDIO
ABCD
SETUP
MUTE
POWER
21
1
Select YES using the Navigation (√,®) buttons 1 and press
the ENTER button 2 again to clear the data, or NO to return
to the previous screen.
OPEN/CLOSE
REPEAT
AN GLE
AUDIO
ENTER
SLOW STOP PLAY PAUSE
PREV NEXT F.F REW
PIP
HOME
BD PLAYER
USB
SEARCH
VOL
2ND
SUBTITLE
CLEAR
ZOOM
P
O
P
-
U
P
M
E
N
U
R
E
T
U
R
N
T
O
P
M
E
N
U
D
I
S
P
L
A
Y
AUDIO
ABCD
SETUP
MUTE
POWER
21
2
LOCAL STORAGE
For a disc compatible with the virtual package. Virtual package is defined as: Some B -Video discs copy data to other
media (local storage) and then play the secondary video, secondary audio, and subtitles (sub contents) simultaneously.
These functions are called virtual packages. Sub contents are automatically recorded to other media from the disc prior to
playing the virtual package.
For this unit, data is copied to a Local Storage. The methods for copy and playback and the required available capacity on
the local storage may vary with the disc. For details, refer to the instructions for the disc.
To use the above functions, it is recommended that you format the local storage on this unit.
Format the local storage using the following procedures. B -Video data, such as secondary video recorded on the local
storage, can also be erased with the following procedures.
TO CLEAR THE LOCAL STORAGE
When the Local Storage does not have enough space to keep the B -Java application data you should clear the Local
Storage first before playback.
Select the General menu as shown on the top of the
previous page. Select Local Storage using the Navigation
(π,†) buttons 1, then press the Navigation (®) button 1.
Select Format using the Navigation (π,†) buttons 1, then
press the ENTER button 2; “ o you want to format?” will
appear.
OPEN/CLOSE
REPEAT
AN GLE
AUDIO
ENTER
SLOW STOP PLAY PAUSE
PREV NEXT F.F REW
PIP
HO ME
BD PLAYER
USB
SEARCH
VOL
2ND
SUBTITLE
CLEAR
ZOOM
P
O
P
-
U
P
M
E
N
U
R
E
T
U
R
N
T
O
P
M
E
N
U
D
I
S
P
L
A
Y
AUDIO
ABCD
SETUP
MUTE
POWER
21
1
Select YES using the Navigation (√,®) buttons 1 and press
the ENTER button 2 again to format the local storage, or NO
to return to the previous screen.
OPEN/CLOSE
REPEAT
AN GLE
AUDIO
ENTER
SLOW STOP PLAY PAUSE
PREV NEXT F.F REW
PIP
HO ME
BD PLAYER
USB
SEARCH
VOL
2ND
SUBTITLE
CLEAR
ZOOM
P
O
P
-
U
P
M
E
N
U
R
E
T
U
R
N
T
O
P
M
E
N
U
D
I
S
P
L
A
Y
AUDIO
ABCD
SETUP
MUTE
POWER
21
2
TO FOR AT THE LOCAL STORAGE
In some special occasions, after clearing the Local Storage, the unit still acts abnormally. In this case, you should format the
Local Storage.

20
Use this option to set the desired TV Aspect.
Select the Video menu as shown above. Select TV ASPECT
using the Navigation (π,†) buttons 1, then press the
Navigation (®) button 1; the TV ASPECT options will appear.
Select one of the options (described below) using the
Navigation (π,†) buttons 1, then press the ENTER button 2.
4:3 PAN-SCAN: Select when the unit is connected to a
conventional TV. Video material formatted in the Pan Scan
style is played back in that style (the left and right edges are
cut off).
4:3 LETTERBOX: Select when the unit is connected to a
conventional TV. Wide-screen images are shown on the
screen with a black band at the top and/or bottom.
16:9 WIDE: Select when the unit is connected to a wide-
screen TV.
OPEN/CLOSE
REPEAT
AN GLE
AUDIO
ENTER
SLOW STOP PLAY PAUSE
PREV NEXT F.F REW
PIP
HOME
BD PLAYER
USB
SEARCH
VOL
2ND
SUBTITLE
CLEAR
ZOOM
P
O
P
-
U
P
M
E
N
U
R
E
T
U
R
N
T
O
P
M
E
N
U
D
I
S
P
L
A
Y
AUDIO
ABCD
SETUP
MUTE
POWER
21
1
VIDEO SETUP ENU:
To enter the Video Setup menu, press the SETUP button, select Video using the Navigation (π,†) buttons and then press
the Navigation (®) button.
TV ASPECT
BD PLAYBACK RESOLUTION
DVD PLAYBACK RESOLUTION
Use this option to set the desired resolution when connected
to the component video output, or H MI output. The true
output resolution depends on the connection used and the
TV’s resolution.
Select the Video menu as shown above. Select Resolutions
using the Navigation (π,†) buttons 1, then press the
Navigation (®) button 1; the Resolution options will appear.
Select one of the options (720p, 1080i, 1080p, 1080p24)
using the Navigation (π,†) buttons 1, then press the
ENTER button 2.
See charts below for resolutions.
OPEN/CLOSE
REPEAT
AN GLE
AUDIO
ENTER
SLOW STOP PLAY PAUSE
PREV NEXT F.F REW
PIP
HOME
BD PLAYER
USB
SEARCH
VOL
2ND
SUBTITLE
CLEAR
ZOOM
P
O
P
-
U
P
M
E
N
U
R
E
T
U
R
N
T
O
P
M
E
N
U
D
I
S
P
L
A
Y
AUDIO
ABCD
SETUP
MUTE
POWER
21
1
RESOLUTIONS
SETUP ENU (CONTINUED)
NOTES:
• Some movies will be displayed in 4:3 pillar box format (black bars on the sides of the picture), even if 16:9 Wide is
selected in TV Aspect menu option.
• To use the 1080p24 (MovieFrame 24 Frames Per Second), the Blu-ray isc must have this feature.
•Press the SETUP button to exit the Setup menus.
• Press the RETURN button to return to the previous setting.