Meraki Outdoor User manual

Meraki, Inc. | 99 Rhode Island St. 2nd Floor, Sa n Francisco, CA 94103 | 415.632. 58 00 | www.meraki.com
Datasheet
Meraki Outdoor
The Meraki Outdoor is a high power indoor/outdoor access point
and repeater and part of the Meraki mesh networking system. It is
weatherproof, supports high-gain and directional antennas, and works
with an other Meraki repeaters to create robust, varied networking
topologies. This makes it perfect for connecting buildings or covering
large outdoor areas.
The versatile Meraki Outdoor has two Ethernet ports allowing you to
connect both your PC and your cable/DSL line directly to the repeater.
It also has signal strength indicators to ensure your installation goes
smoothly.
Radio
• 200 mW (23 dBm) peak transmission power*
• Enhanced receive sensitivity
• External RP-SMA connector
• 802.11 b/g (1 - 54 Mbps)
• 2 dBi omni-directional antenna included
Power
• 5 - 22 V DC
• Power Over Ethernet, 12 - 22 V (non 802.3af)
• Power consumption: 12 W max; 3 W typical
• 15 V/0.8 A DC power adapter included
• Power Over Ethernet injector included
Environment
• Operating temperature: 14° F – 122° F (-10° C – 50° C)
• IP - 66 environmental rating
Typical Coverage Radius
• Refer to the Meraki Range Calculator
Physical Dimensions (without antenna)
• 8.5” x 3.5” x 2” (216 mm x 89 mm x 50 mm)
• Weight: 0.55 lb (250 g)
• Mounting feet included
Interfaces / Ports
• Two 10/100 Mbps auto-crossover Ethernet ports:
automatically detects PC or gateway operation
• Signal strength LEDs
Warranty
• 1 year hardware warranty included
Regulatory
• FCC (USA), CE (EU), IC (Canada), Anatel (Brazil), Cofetel (Mexico), C-Tick
(Australia and New Zealand), TK (Turkey)
• RoHS
* Max transmission power is decreased for certain geographies
to comply with regulatory requirements
Signal Coverage Pattern
Meraki, Inc. | 99 Rhode Island St. 2nd Floor, San Francisco, CA 94103 | 415.632. 5800 | www.meraki.com
Regulatory
• FCC (USA)
• CE (EU)
• IC (Canada)
• C-Tick (Australia and New Zealand)
*Max transmission power is decreased for certain geographies
to comply with regulatory requirements
Power
• 5 - 22 V DC
• Power Over Ethernet, 12 - 22 V (non 802.3af)
• Power consumption: 12 W max; 3 W typical
• 15 V/0.8 A DC power adapter included
• Power Over Ethernet injector included
Radio
• 200 mW (23 dBm) peak transmission power*
• Enhanced receive sensitivity
• External RP-SMA connector
• 802.11 b/g (1 - 54 Mbps)
• 2 dBi omni-directional antenna included
Environment
• Operating temperature: 14° F – 122° F (-10° C – 50° C)
• IP - 66 environmental rating
Physical Dimensions (without antenna)
• 8.5” x 3.5” x 2” (216 mm x 89 mm x 50 mm)
• Weight: 0.55 lb (250 g)
• Mounting feet included
Interfaces / Ports
• Two 10/100 Mbps auto-crossover Ethernet ports:
automatically detects PC or gateway operation
• Signal strength LEDs
Warranty
• 1 year hardware warranty included
The Meraki Outdoor is a high power indoor/outdoor repeater and part of
the Meraki mesh networking system. It is weatherproof, supports high-gain
and directional antennas, and works with an other Meraki repeaters to create
robust, varied networking topologies. This makes it perfect for connecting
buildings or covering large outdoor areas wirelessly.
The versatile Meraki Outdoor has two Ethernet ports allowing you to connect
both your PC and your cable/DSL line directly to the repeater. It also has
signal strength indicators to ensure your installation goes smoothly.
Meraki Outdoor
Speci cations
Part Number: 280-03200-A
Typical Coverage Radius
• Refer to the Meraki Range Calculator
120
90
60
30
330
300
270
240
210
180
150
0
120
90
60
30
330
300
270
240
210
180
150
0
Signal Coverage Pattern
Meraki, Inc. |660 Alabama St., San Francisco, CA 94110 |415.632.5800 |www.meraki.com