!
2
1
Connects
to Control 15 Connection to
the Internet
12
Attach the Control 15’s network port to a LAN port
on your router. You can use the Neutrik Ethercon
connector (supplied) with an Ethernet cable of
the appropriate length (not supplied.)
Make sure the WAN/Internet port of this router
connects to the rest of your network, or to your
Cable/DSL modem.
Depending on the make and model of your router,
crossover Ethernet cable(s) may be required
to make valid connections to your Control 15.
S T E P 2:nETWORk COnnECTiOnS
Meridian Audio Ltd, Latham Road, Huntingdon, Cambridge PE29 6YE, United Kingdom |www.meridian-audio.comMeridian Audio Ltd, Latham Road, Huntingdon, Cambridge PE29 6YE, United Kingdom |www.meridian-audio.com
!
1
1
S T E P 1:AudiO COnnECTiOnS
Your Control 15 features a S/PDIF
digital audio output. This can be
connected to an S/PDIF input on your
audio system, or on Meridian DSP
Loudspeakers. The Control 15 also
includes a SpeakerLink output, which
can be connected to Meridian DSP
Loudspeakers.
A. S/PDIF digital audio output
B. Meridian SpeakerLink audio output
C. Meridian Comms (for integrating your
Control 15 with a Meridian system)
D. Meridian trigger out and IR in
(included for future use)
As a precaution, please lower the
volume and/or power down any
external audio components before
making new audio connections.
A
B
C
D
Note: This document covers the use of the Control 15 in a standalone conguration.
For setup in other systems, see the appropriate QuickStart Guides supplied with other units.