Merlin Flash 4000 User manual

1
Thank you for purchasing this Merlin Product. Please read the
instruction manual carefully before using the product.
The documentation provided will allow you to fully enjoy all the
features this unit has to offer.
Please save this manual for future reference.
Product Parts and Functions
1) USB 1 –Charging Output
2) USB 2 –Charging Output
3) Type-C Port –Charging Input
4) Micro USB Port –Charging Input
5) LED Indicator –Level and Status Indicator
6) ON/OFF Button
7) Wireless Charging –Charging Output
How to Use
Charging the Power Bank
- The power bank can be charged through any of the input ports
(Type-C and Micro USB)
- Use the included cable or your smartphone charger (for
Android Only) to charge the power bank
- The power bank can be charged from a computer or any 5V
USB adaptor (refer to Picture A)
Charging your Smartphone
- You may charge up to two devices using the USB ports
- Simply use the corresponding cable for your smartphone,
connect the USB pin to the power bank’s USB port and the
other end to your smartphone then switch the power bank ON
Wireless Charging
- Lay the power bank flat with wireless surface facing up. Turn
ON the power bank and place your smartphone on top
properly. Please take note that it only works with
smartphones that is capable of wireless charging.
Note: The LED (#5) will be able to tell you how much charge is left
when being used OR how much charge has been completed when
being charged. There are 4 LEDS corresponding to (100%, 75%, 50%,
and 25%)
FAQ
Q) Why is my Smartphone not charging?
A) For wireless charging, please make sure that your smartphone
supports wireless charging and place it properly on the
correct surface.
B) For wired connection, try to use another charging cable
and/or port on the power bank to find out the problem and
make sure that the power bank is ON
Q) My Smartphone is charging but at a slow rate.
A) If your device is not charging properly and the display on the
LED shows a low charge, this might be a sign that the power
level is very low and your power bank needs to be charged.
Maintenance
1. Retain these instructions for future use.
2. Clean the product with a damp cloth and mild soap.
3. Do not expose this product to rain or moisture.
4. Be careful not to turn or twist the cables used in this product
too much as it can lead to malfunction and failure.
5. This product is not designed to be submerged in water and
will malfunction if this occurs.
6. This product has no user serviceable items inside. Do not
open this product as the user risk injury and would void the
warranty.
7. Keep unit away from strong magnetic fields to avoid
interference with the product.
Flash 4000

2