MetalTech JOBSITE 5 Series User manual

OPERATIONAL SAFETY AND
ASSEMBLY INSTRUCTIONS
MODEL: I-IMISAU
READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT.
KEEP THIS MANUAL HANDY FOR FUTURE REFERENCE.
Picture may differ from actual product
IN-IMISAU-AU-03
AS/NZS
MEETS AUTRALIAN AND NEW ZEALAND
STANDARDS 1576.1:2010
Metaltech is a registered trademark of Metaltech-Omega inc.
DESIGNED IN CANADA / MADE IN CHINA
KEEP THIS MANUAL FOR FUTURE REFERENCE
Keep this manual and the original sales invoice in a safe, dry place for future reference.
If one of our products has a defect in manufacture, please return your product to the store you bought it from.
WWW.METALTECH.CO
LAVAL, QUEBEC, CANADA H7L 3N6

ASSEMBLY INSTRUCTIONS
1
Insert both outriggers in the structure lower extremity
to extend the height. Secure outriggers with the locking
devices.
2
Insert casters in the outriggers or directly in the
scaffold structure depending on step #1.
Secure casters with locking-pins.
OPERATIONAL SAFETY
DO NOT USE WHERE ELECTRICAL HAZARD EXISTS:
Metal conducts electricity.
Do not use this equipment where contact may be made with power lines or other live electrical circuits.
DO NOT OVERLOAD:
Duty Loading: Medium duty. Total load of 448.5 kg per bay.
224 kg per platform / Step bar: 113.5 kg / Tool shelf: 16 kg
FAILURE TO UNDERSTAND AND FOLLOW ALL SAFETY RULES AND ASSEMBLY INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH.
3
Unfold the structure.
4
Install the step bar and platforms
at the desired height.
5
Install the safety rail. The spring-lock
mechanism of the safety rail must be
engaged in the scaffold structure.
READ BEFORE BEGINNING ASSEMBLY.
MAX.
1
THIS SCAFFOLD
IS DESIGNED TO
BE USED BY ONE
PERSON ONLY
ALWAYS LOCK
THE FOUR CASTERS
BEFORE CLIMBING
ALWAYS INSPECT
BEFORE USE
ALWAYS KEEP BODY
CENTERED INSIDE
STRUCTURE OF UNIT
DO NOT USE IN
INCLEMENT WEATHER
OR HIGH WINDS
ACIDS ARE
CORROSIVE. DO
NOT EXPOSE UNIT
TO CORROSIVE
SUBSTANCES
NEVER PLACE
ANYTHING UNDER OR
ATTACH ANYTHING TO
UNIT
DO NOT USE
THE UNIT AS
A FOOTBRIDGE
REMOVE OR FASTEN
TOOLS, MATERIAL OR
EQUIPMENT BEFORE
MOVING. NEVER MOVE
A SCAFFOLD WITH
WORKER WITHIN.
UNIT SHALL ONLY BE
USED ON FIRM AND
LEVEL SURFACES
NEVER TRY MOVING
THE UNIT WHILE
STANDING ON IT
ERECT ON FIRM
AND LEVEL GROUND
2
5
3
4
CLICK!
BOX CONTENTS
QTY. PART CODE DESCRIPTION UNIT WEIGHT
1321100700 Scaffold structure 35.5 kg
2321101400 Anti-slip platforms 4.8 kg
1321101500 Anti-slip step bar 2.9 kg
1321101200 Safety rail 1.8 kg
2321100600 Outriggers 1.8 kg
4I-ICW5 Casters 1.6 kg
4321101000 Locking-pins 0.02 kg
OPERATION AND SAFETY
Do not use this equipment if you are in poor health, taking
medications, drugs, or have been consuming alcohol, all of which may
impair your ability to work safely on this product.
Always use this scaffold in conformity with local or national legislation
which applies.
Inspect before use. Do not use if damaged. Check for missing
parts.
Examine thoroughly to make sure unit is set up properly.
Always use casters and outriggers secured to the structure with the
locking devices.
Always use the safety rail secured to the structure with
the spring-lock engaged in the scaffold structure.
Do not climb unless the 4 casters are in locked position.
Erect to be plumb on firm and level surface.
This scaffold must be used on a firm surface that is free
of pits, debris, holes or obstructions.
Never place anything under or attach anything to this scaffold to
increase height or to adjust to uneven surfaces.
Keep scaffold free of debris and unnecessary equipment.
Acids are corrosive and can seriously affect strength.
Do not expose this scaffold to corrosive substances.
Always keep body centered inside structure of scaffold.
Remove or fasten all tools, material or equipment before moving.
Use extra caution when moving to avoid tipping.
Never try moving this scaffold while standing on it.
Never move a scaffold with worker within.
Do not use powered devices to propel this scaffold. Use extra
caution near operating machinery.
Do not use if the surface is not firm and level.
Do not use in inclement weather or high winds.
Maintain a firm grip while climbing.
Always move down facing the unit.
This scaffold is designed to use with a maximum of 2 platforms.
Do not step or stand on the tool shelf.
Always ensure that the tool shelf is locked before using it.
Do not modify the scaffold or any of its components.
This scaffold is designed to be used by one person only.
Do not use the scaffold as a footbridge.
TOOL SHELF
MAXIMUM LOAD
CAPACITY:
16 kg
MAX.
16 kg
MAX.
1.22 m
MAXIMUM
2
PLATFORMS
MAX
MAX. 449 kg
SCAFFOLD
MAXIMUM LOAD
CAPACITY: 449 kg
224 kg PER
PLATFORM
METAL CONDUCTS
ELECTRICTY
MAXIMUM
2 PLATFORMS
PER UNIT
1.22 m
MAXIMUM
WORKING HEIGHT
ALWAYS MOVE DOWN
FACING THE UNIT
All photos and drawings in this booklet are for reference purposes only.
1