Metra Electronics AS-1X3TSPLIT User manual

BY
AUDIO
SOLUT
I
ONS
AS-1X3TSPLIT
User Manual
Digital
Optical
Splitter
1x3
HOME
THEATER
GROUP

INTRODUCTION
Dear
customer
Thank
you
for
purchasing
this
product!
For
optimum
performance
and
safety,
please
read
these
instructions
carefully
before
connecting,
operating
or
adjusting
this
product.
Please
keep
this
manual
for
future
reference.
This
Digital
Optical
Audio
splitter
allows
the
user
to
connect
and
distribute
one
digital
optical
output
to
three
digital
optical
inputs.
FEATURES
• Send
one
Digital
Optical
Audio
signal
to
three
Digital
Optical
Audio
inputs
•
Audio
format
support
:
LPCM2.0/DTS/Dolby-AC3
•
Supports
signal
retiming
•
Over-voltage
protection
to
prevent
the
damage
caused
by
connecting
unmatched
power
adapter
to
the
machine
•
No
loss
of
audio
quality
• Installs in
minutes
•
Includes
DC
SV/lOOOmA
power
supply

INCLUDED ACCESSORIES:
1.
SV
Power
Adaptor
2.
Operation
Manual
PHYSICAL
CONNECTION
ILLUSTRATION:
SPDIF/Toslink
Splitter
1X3
0 0 0
1.
Power
indication
2
Figure
1.0
3 4
2.
SPDIF/Toslink
output
port
1,2
3.
SPDIF/Toslink
output
port
3
4.
SPDIF/Toslink
input
port
5.
DC/SV
Power
Adapter
Interface
1
5

OPERATING AND CONNECTING:
~~~ =@1
I I
06600666666
.......
1
-c::::::::::J @
'I
I
I ;
00000000000
..::::::; c::::J
t t
,{"
~
SPDIF/Tosllnk
Splitter 1X3
. ..
~ --J
oo
-
1
-c::::::::::J @
.I
I
I I
0000000000~
.::::::::::J c:::::;
t
1. Connect the optical cable from the source to the Digital Optical
Audio splitter input.
2. Connect the splitter output ports to the optical audio signal receiver
(such as amplifier, home theater receiver) by using the optical cable.
3. Connect 5V power supply to the splitters DC input port.
SPECIFICATIONS:
Supported Digital Audio Formats ...............................LPCM 2.0/DTS/Dolby-AC3
Maximum Output Cable Distance .. .... .................................. .... .................. ... 40 Meters
Power Supply lnput ................................ .. ................ ... AC, 50Hz/60Hz, 100V - 240V
Power Supply Out ...................................................................................DC, 5V, 1000 Ma
Maximum Current Draw .......................................................................................... 100 Ma
Operating Temperature Range .........................................0 to 40 (C), 32 to 104 (f)
Dimension (L x W x H) .... .................... ...... 54 x 54 x 23.5 (mm), 2.2 x 2.2 x .9 (in)
Weight .... ................................................................ .. .... .. .................... 35 (grams), 1.24 (oz)

NOTES:
Please use
this
product
as
per
the
instructions.
1.
The
product
should
be
placed
away
from
any
Damp,
High-Temperature,
Dusty,
Corrosive,
and
Oxidative
environments.
2.
All
parts
should
be
free
from
movement.
3.
Touching
the
power
adaptor
with
wet
hands
is
prohibited.
4. Please
hold
the
power
adapter
by
the
head
and
do
not
pull
by
the
power
cord
when
removing
from
the
socket.
5.
Please
do
not
open
the
cover
or
touch
the
internal
components.
6. Please use
only
the
original
factory
power
adapter.
Before
powering
on,
please
check
the
connection
line
carefully.
Also
,
make
sure
that
all
interfaces
are
properly
connected.
The
common
troubleshooting
methods
are
listed
below:
SERIAL
NO
TROUBLE
DESCRIPTION
CAUSE
AND
WAYS
TO
DEAL
WITH
1
No
power
to
device
Verify
that
the
powe
r
supply
is
correctly
connected
Verify
that
the
power
supply
is
not
on
a
sw
i
tched
out
l
et
Verify
that
a
Digital
Optical
Signal
is
being
output
from
the
source
device
by
checking
to
see
if
there
is
a
RED
light
at
the
2
No
sound
output
Splitter
side
of
the
Optical
cable.
If
there
is
a
RED
light
,
verify
connection
to
Splitter.
If
there
is
no
RED
light,
please
check
source
for
power
and
proper
connection.
3
Sound
interrupted
Reconnect
the
Optical
cable
to
verity
proper
fu
nction

G ••• i:l TECH SUPPORT
l ::: J 866-839-9187
HOME THEATER GROUP
© 2017 Metra Electronics Corp
www.MetraHomeTheater.com
460 Walker Street
Holly Hill, FL, 32117-2699
[email protected]
CE
17 _METRA_1135