METRUM Baby Ambre User manual

Made by ALL Engineering
is a trade mark of Roon labs
Endpoint " Baby
BabyBaby
Baby Ambre
AmbreAmbre
Ambre "
User manual
Updated 28-11-2018

Made by ALL Engineering
is a trade mark of Roon labs
Introduction
At Metrum Acoustics e are fanatic about building the best Digital to Analogue converters
because of our love for making digital music sound sublime!
Because of this dedication to perfection e can truly appreciate listening experiences like
ROON©.
Roon© looks at your music and finds photos, bios, revie s, lyrics, and concert dates, and
makes connections bet een artists, composers, performers, conductors, and producers.
What you get is a searchable, surfable magazine about your music.
And as e believe a DAC, Digital to Analogue converter is the heart of your music setup,
hat else can e do than to build a ROON end point hich ill allo you to direct your
digital music through our device in order to get the most sublime sound available!

Made by ALL Engineering
is a trade mark of Roon labs
IMPORTANT AFETY IN TRUCTION
1. Read Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follo all Instructions.
5. Do not use this apparatus near ater.
6. Clean only ith a dry cloth.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
8. Unplug this apparatus during lightning storms or hen unused for long periods of time.
9. Refer all servicing to qualified service personnel. Servicing is required hen the apparatus
has been damaged in any ay, such as a po er-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
10. The Ambre must be placed on a firm, level surface here it is not exposed to dripping
or splashing.
11. Before making connections to the dac, ensure that the po er is off and other components
are in mute or stand-by mode. Make sure all cable terminations are of the highest quality,
free from frayed ends, short circuits, or cold solder joints.
12. THERE ARE NO USER SERVICEABLE PARTS INSIDE THE "Ambre".
Please contact All Engineering if you have any questions not addressed in this guide.
13. All Engineering cannot be held accountable and/or responsible for any form of damage or health
issues inflicted to you, other people, pets, companies and non-living objects, that are caused by any
form of usage of the product hich is not described in this manual.
14.By actually using this product and turning it on for the first time, you agree to these terms

Made by ALL Engineering
is a trade mark of Roon labs
What is in the Box
•The Baby Ambre Endpoint
•Po er cord (only Euro or USA based po er cords)
•1x UTP cable 1.5 mtr

Made by ALL Engineering
is a trade mark of Roon labs
Connections
Caution! Please connect your interconnects first before connecting the mains power cable!
•Power requirements: De product is made to handle mains voltages bet een 90 and 260
Volts.
•LAN (local area network) input: Connect an UTP cable ith your local net ork. The Baby
Ambre is made as a Roon end point and cannot ork as a standalone device. The Ambre
expects a orking Roon music server on the same local net ork.
•Coaxial Output: A 75 Ohm coaxial cable should be used to connect the Ambre to other digital
audio equipment like a dac for instance. The coaxial output has a galvanic isolation and can
handle a maximum sample rate of 192 kHz.
•Optical output: A standard Toslink cable can be used to connect the Ambre to other digital
audio equipment. The max sampling rate of the Toslink interface is limited to 96kHz.