MG TOP SP P User manual

USER GUIDE
Pneumatic Blind Stapler
TOP SP P, TOP B P
Page: 1
Version: 0711
ET 572
Page 1 of 10 18.10.11 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP P 0711.DOC
Operating Instructions
Pneumatic Blind Stapler
Type TOP SP P, TOP B P
Series V04/ 1096
Light - easy to handle - compact - balanced
Pneumatic carton stapler for the fast and stable blind stapling of filled folding boxes made of
corrugated cardboard. Loading capacity 120 TOP-staples
IMPORTANT
Before the first commissioning read this manual thoroughly and completely and keep it in a safe place.
Observe and follow the safety instructions and only use the machine if you are sure that you have
completely understood all the instructions.
Failure to comply can lead to injuries!
If you have any questions, contact the manufacturer
MEZGER Heftsysteme GmbH
Saganer Straße 24
90475 Nürnberg
Germany

USER GUIDE
Pneumatic Blind Stapler
TOP SP P, TOP B P
Page: 2
Version: 0711
ET 572
Page 2 of 10 18.10.11 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP P 0711.DOC
Pneumatic Blind Stapler
Type/description:
Serial number:
Year of construction:
Preface
It is necessary to acquire the knowledge conveyed by this ORIGINAL OPERATING INSTRUCTION for
a safe operation. The information is presented in brief and clear form. The chapters are sorted by
numbers
Copyright
The copyright of this operation manual remains with MEZGER Heftsysteme GmbH
Contents overview
Contents overview ................................................................................................................. 2
1 Conformity ...................................................................................................................... 2
2 Safety instructions .......................................................................................................... 3
3 Intended use................................................................................................................... 4
4 Transport and initial commissioning................................................................................ 5
5 Function description........................................................................................................ 6
6 Fundamental notes on the work technique and handling ................................................ 6
7 Decommissioning ........................................................................................................... 7
8 Maintenance and care .................................................................................................... 7
9 Error detection ................................................................................................................ 9
10 Technical data ................................................................................................................ 9
11 Service.......................................................................................................................... 10
1 Conformity
This machine was built in conformity with the following EU guidelines:
Machinery directive 2006/42/ EG
See the labeling on the machine

USER GUIDE
Pneumatic Blind Stapler
TOP SP P, TOP B P
Page: 3
Version: 0711
ET 572
Page 3 of 10 18.10.11 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP P 0711.DOC
2 Safety instructions
Safety instructions and important explanations, are labeled with the following pictograms.
The symbols used in the operating instructions have the following meaning:
Symbol Signal word Meaning
Warning notice
Warning of possible injuries to persons or
possible damage to property
Warning of possible defects or destruction
of the machine
Prohibition
Indicates
general
Prohibitions!
Warning notice Risk of fingers being crushed!
Prohibition Protect from moisture!
Read all these instructions before using the stapler and keep the safety instructions in a safe place.
Safety on the well.
The operating personnel must be trained in the handling of the stapler and they must have fully read
and understood the operating instruction.
To avoid injury or damage, the operator must additionally observe the company's internal safety
guidelines!
In addition, we would like to refer to further national rules and safety provisions which are not
contained in this manual.
Keep persons who are not instructed, especially children, away from the machine
and from your work area!
If damage to the stapler is determined by the operator during production, the machine may no longer
be used and must be repaired by a professional!
Only original parts may be used as spare parts!

USER GUIDE
Pneumatic Blind Stapler
TOP SP P, TOP B P
Page: 4
Version: 0711
ET 572
Page 4 of 10 18.10.11 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP P 0711.DOC
3 Intended use
The machine is only to be used as intended. It may only be used, operated and maintained according
to the information contained in this operating manual.
Only materials and staples defined for this machine may be used, as this could otherwise lead
to malfunctions. The stapling machine may only be used as specifically described in this
operating manual. Any other application is only permitted after a prior written approval from the
manufacturer.
Any other usage is not regarded as intended use and can lead to damage to persons or property. The
operator of the machine is solely liable for damages deriving from any non-intended use.
The operator must ensure that the stapling machine is only operated as intended and that all types of
hazards to life and health for the user or third parties are avoided. In addition, a compliance with the
accident prevention regulations and other safety regulations and laws must be observed.
If the stapler is abused for purposes other than the specified usage scenarios, this
can lead to accidents
3.1 Application area/designated use
Pneumatic blind stapler TOP SP P and TOP B P are used for stapling filled folding boxes made of
single and double corrugated cardboard. The TOP blind staplers are also available as manually
operated machines (single and two-handed). The TOP staple to be used is selected for the respective
cardboard quality. The staple should be bent within and the lowest cardboard layer without puncturing
it. This prevents a damaging of the packaged goods. If there is no danger of damaging the packaged
goods it is also possible to perform a stapling through all layers, meaning that the staple is bent over
outside of the lowest cardboard layer.
TOP SP P (TOP SPECIAL - labeled on the machine with TOP SP) is primarily used for applications
involving double corrugated cardboard. The correct staple for this is the TOP SP 18. But to be able
to also staple single corrugated cardboard, TOP SP 11 staples can be used without making
changes to the machine.
TOP B P (labeled on the machine with TOP B) is primarily used for applications involving single
corrugated cardboard. For this, the following staples varieties with different leg lengths are available:
TOP B 10, TOP B 12.
But to be able to also staple double corrugated cardboard, TOP SP 15 staples can be used without
making changes to the machine.

USER GUIDE
Pneumatic Blind Stapler
TOP SP P, TOP B P
Page: 5
Version: 0711
ET 572
Page 5 of 10 18.10.11 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP P 0711.DOC
With the TOP blind stapler a bottom stapling of empty boxes is also possible. The machine is hereby
introduced into the empty box and stapled from the inside outwards, or the empty carton is placed over
a buck and stapled from the outside inwards. After the empty carton is filled and the top stapled, the
bottom side can also be stapled just like the top after turning it over.
3.2 Ambient conditions
The machine should be operated at room temperature, protected against environmental influences.
Use within an explosive atmosphere is permitted only with prior consent and written permission of the
manufacturer.
3.3 Operating personnel
Only trained and knowledgeable staff is permitted to operate the machine.
Note: Competent, is someone who based on his training and experience has sufficient knowledge in
the field of stapling machines and is familiar with the relevant government industrial safety regulations,
accident prevention regulations and the generally accepted rules of technology (e.g. DIN standards,
VDE regulations) to the extent that he can assess the secure state of machines and in particular the
state of stapling machines.
4 Transport and initial commissioning
The stapling machine is delivered completely assembled and can be transported as a whole.
Transportation equipment can also be used for transporting the machine.
Before the stapler is put into operation, please read all instructions in this manual. This stapling
machine may only be put into operation by trained personnel.
To make the stapler ready for operation after delivery, the following tasks must be carried out:
- Check the equipment for completeness
- Insert the staples.
- Connect the pressurized air and set it to 4 (min.) – 6 bar (max.)
The stapler is delivered ready for operation.
When the stapling machine is ready for operation, it is prohibited to touch the
stapling ejection opening or the running stapler! DANGER OFINJURY!
Oxygen or combustible gases may not be used as a propulsion source for pressure
driven machines.

USER GUIDE
Pneumatic Blind Stapler
TOP SP P, TOP B P
Page: 6
Version: 0711
ET 572
Page 6 of 10 18.10.11 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP P 0711.DOC
The machine should only be operated with an
interstaged maintenance unit (filter, water extractor, oil
vaporizer, manometer; not contained within the scope
of delivery) since dirt and water in the pressurized air
can lead to damages. We recommend suspending the
stapling machine on a balancer (weight equalization),
for example, the B 2/4. A spiral compressed air hose
DS 75 is used to supply the compressed air.
5 Functionality description
The machine is placed on the cardboard box to be stapled and then triggered. The
trigger time should not be less than 0.5 seconds, since this could otherwise lead to
malfunctions. The staple is hereby ejected from the staple opening and penetrates the
box, where it is bent and anchored.
The machine may only be lifted from the cardboard box after the
staple has been bent in the box meaning that the staple has
completely been ejected from the machine, since this could
otherwise lead to malfunctions.
The stapling will be more rigid if the machine is pressed onto
the cardboard box harder. The nose and the two markings on
the head piece to serve as a guide and mark the ejection point
of the staple. The machine should be pressed onto the
cardboard box in a slightly top-heavy way.
The penetration depth of the staples is determined by the
respective staple type. It is not intended for adjustments to be
made on the machine.
6 Fundamental notes on the work technique and handling
Before the operator starts to use the machine he must acquire information about the application
scenario and check if the machine is suitable for it.
Carefully follow all safety instructions!
Check to make sure that the stapling machines are not damaged and that they can
be operated in a safe way.
The operating safety of the stapling machine must be checked before starting the work and constantly
rechecked!
Safety devices may not be bypassed or rendered ineffective!
Keep your work area in order.
Disorder in the work area can cause accidents.
•Use only ORIGINAL TOP staples that are made specifically for this quality equipment. Third-party
staples can cause considerable damage and malfunctions.
B 2/4
DS 75
Nose trigger

USER GUIDE
Pneumatic Blind Stapler
TOP SP P, TOP B P
Page: 7
Version: 0711
ET 572
Page 7 of 10 18.10.11 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP P 0711.DOC
•Never perform a stapling without cardboard. Only lift the machine from the cardboard box after the
stapling process has been completed.
•Do not staple on a hard underlay.
•Should a staple failure arise, correct it immediately and do not trigger any further stapling.
•Shut down the machine after use. If possible, the TOP blind stapler should be suspended over the
packaging center. Available accessories:
B 2/4 Balancer (weight equalization) with a swivelling load hook
DS DS 75 spiral compressed air hose with an extended length of 7.5 m
W/EINH maintenance unit consisting of a pressure regulator, water separator and an oil vaporizer
•Periodically clean the cardboard dust from the TOP blind stapler - preferably with a blowgun.
7 Decommissioning
If the unit is not used for a prolonged period of time, disconnect the air supply and extract the staples.
Notice of residual risks
Protect the machine from moisture!
Do not operate the machine in a humid environment!
Only operate the machine within buildings!
Compressed air connections should be checked regularly.
When working on pressurized air connections and hoses the stapler must be
depressurized.
8 Maintenance and care
The stapling machine does not require a great deal of care, but should be cleaned and maintained on a
regular basis. Soiling should be removed directly by the operator after the machining processes.
Any alterations to the stapling machine especially to the safety equipment - are
prohibited!

USER GUIDE
Pneumatic Blind Stapler
TOP SP P, TOP B P
Page: 8
Version: 0711
ET 572
Page 8 of 10 18.10.11 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP P 0711.DOC
Before the start of all major maintenance and cleaning, all safety precautions must be taken and the
pressurized air supply must be switched off and disconnected.
The following work processes/inspections should be performed by knowledgeable personnel on a
regular basis:
•Regular cleaning of the stapling machine
•Regular oiling of the movable parts (no graphite oil!) - on a weekly basis
•Check the maintenance unit for condensation. If necessary remove the condensation.
•The maintenance unit should be set to 1 drop of oil per 30 stapling cycles. (1/8 turn)
•In case of sluggishness or blockage of the driver, loosen the screws (57 and 58) on the head piece
(51) thus releasing any possibly present stress in head-piece and then tighten these screws firmly
again.
•Cleaning of cardboard dust
Only ORIGINAL spare parts may be used. (see “spare parts list”)
Failure to comply will void any guarantee claim and exclude any liability!
Only original spare parts are subjected to our quality control. To ensure a safe and reliable operation,
only spare parts from the manufacturer may be used.
All technical equipment, especially the safety equipment, must be inspected by professional staff after
a modification or repair.
8.1 Reloading of TOP staples
Pull the transport puck (9) back and upwards until it snaps in. After
inserting the 3 staple strips (120 staples) gently press down the
transport puck (excessive force will cause a rupture of the transport
bands and a breaking of the staple strips) and bring it into a tensioned
position.
09
57 51
58

USER GUIDE
Pneumatic Blind Stapler
TOP SP P, TOP B P
Page: 9
Version: 0711
ET 572
Page 9 of 10 18.10.11 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP P 0711.DOC
9 Error detection
During any kind of defect, the machine is to be shut down and separated from the
pressurized air supply until the flawless operation is ensured again. Please do not
try to dismantle or repair the machine.
9.1 Removing jammed staples
If there is a malfunction or staples are jammed proceed as described in the following.
In the event of a malfunction, which is more extensive than just some jammed
staples, please contact us. The machine will be examined by our specialists
and the malfunction will be remedied.
•Interrupt the air supply.
•Remove any staples still present in the staple repository.
•Remove the two screws (12) and extract the
staple repository (03)
•Remove all the staples from the unit and clean
the machine from dirt and debris.
•After the staples have been removed, the repository is to be
inserted again.
•Reconnect the air supply.
10 Technical Data
Machine: TOP SP P, TOP B P
Air pressure during the stapling process: 4 to 6 bar, cylinder max. 7 bar
Air consumption during the stapling: 0.48-0.72 NL/stapling
Stapling speed approx. 0.2 s/stapling
Weight without the staples approx. 2.9 kg
Length x Width x Height 350mm x 85 mm x 188 mm
Air supply connection: 6mm = ¼”
Staple for TOP SP P TOP SP 11, TOP SP 18
Staple for TOP B P TOP B 10, 12 und TOP B 15
Capacity: 120 staples
Noise emission: < 70 dB(A)
12
03

USER GUIDE
Pneumatic Blind Stapler
TOP SP P, TOP B P
Page: 10
Version: 0711
ET 572
Page 10 of 10 18.10.11 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP P 0711.DOC
10.1 Versions
Blind stapler TOP SP P for staples TOP SP 11 and TOP SP 18
Blind stapler TOP B P for staples TOP B 10, 12 and 15
11 Service
Repairs performed by:
MEZGER Heftsysteme GmbH
Saganer Straße 24
90475 Nürnberg
Germany
or
authorized professional companies
Damages which are caused in particular by natural wear and tear, overloading, misuse or damage
caused by the user or other use contrary to the operating instructions will be excluded from the
warranty.
Keep the operating instructions, safety instructions, parts list and proof of purchase in a safe place.
TOP SPECIAL TOP B